Filename: REDFISH_X10_327.bin  version: 3.27  Date: 01-18-2016

Support Motherboard: All X10 MBs
U-Boot build time : 2009.01 (Nov 27 2013)
Java SOL Viewer version : v0.5.9
Java iKVM Viwer version : v1.69 r25

1.  Category: Fix
    Description:
        [68394] RedFish - The time zone format is incorrect.

    Impact motherboard: All
    Affected functions:
    Validation :
        1. Change the time zone from the WebGUI and read it by using the redfish API.
        2. Check The time zone format

2.  Category: Fix
    Description:
        [68389] [Red_fish] Return Message is incorrect

    Impact motherboard: All
    Affected functions:
    Validation :
        1. Post the command for https://IP/redfish/v1/Systems/1/Actions/ComputerSystem.Reset with {"ResetType":"????%#@"}
        2. Check http error code

3.  Category: Fix
    Description:
        [68390] [Redfish v3.26] Administrator/ReadOnlyUser confusion resulted in misbehavior

    Impact motherboard: All
    Affected functions:
    Validation :
        1. Generated two accounts (different password) using the same username with one in Administrator group one in
           ReadOnlyUser group.
        2. To login using the ReadOnlyUser account and check privileges.

4.  Category: Fix
    Description:
        [68416] [Red_Fish]Return message not correct--{"IndicatorLED": "klkl"}

    Impact motherboard: All
    Affected functions:
    Validation :
        1. Patch the command for https://IP/redfish/v1/Chassis/1/  with {"IndicatorLED": "klkl"}
        2. Check http error code

5.  Category: Fix
    Description:
        [68351] RedFish - No CPU model name and the max speed is always 4000MHz

    Impact motherboard: All
    Affected functions:
    Validation :
        1. Get the command for https://IP/redfish/v1/Systems/1/Processors/1
        2. Check CPU Model name with WebGUI -> Hardware Information

6.
    Category: Fix
     Description:
       [67813] [EVT]FP LED - Overheat LED for CPU2 failed

     Impact motherboard: X10DSC-TP4S
     Affected functions:
       Validation :
           1. Stress CPU2 temp to observe.
           2. Check if red led turns on very quickly before it touch Tjamx degree

7.
    Category: Fix
     Description:
       [68010] AOC-STG-i2T 10G LAN cards is not supported.

     Impact motherboard: X10DRG-O
     Affected functions:
       Validation :
           1. Put the AOC-STG-i2T onto slot 5,6,7 of PCIe board.
           2. Check the 10G temp sensor.

8.
    Category: Fix
     Description:
       [68467] Wrong CPU sensor id
       [68464] Wrong sensor id Chassis

     Impact motherboard: All
     Affected functions:
       Validation :
           1. Set the SMTP and alert correctly.
           2. Generate CPU/Chassis related SEL.
           3. Check the email wording.

9.  Category: Fix
    Description:
        [68411] [Redfish v3.26]Radius Secret is hidden in IPMIGUI but API displays the entire string.

    Impact motherboard: All
    Affected functions:
    Validation :
        1. Update(or do PATCH in redfish) RADIUS information and get it back to check

10. Category: Fix
    Description:
        [67259] Not easy to identify if there are multiple controllers installed

    Impact motherboard: All
    Affected functions:
    Validation :
        1. Install 2 Avago 3108 devices then go to web to check the information subpage

11. Category: New Feature
     Description:
       Support new motherboard: X10SDD-F

     Impact motherboard: X10SDD-F
     Affected functions:
     Validation :
         1. Board ID: 0x0919.

12. Category: New Feature
     Description:
       Support new motherboard: A2SDI-TP8F

     Impact motherboard: A2SDI-TP8F
     Affected functions:
     Validation :
         1. Board ID: 0x090F.

13. Category: Fix
    Description:
        [67486] [SUM 1.6.0(2015/11/20)] Test fail.

    Impact motherboard: X10SLL
    Affected functions:
    Validation :
        1. Run the test 229.
        2. Check the result.

14.
    Category: Workaround
     Description:
       [65729] BIOS ECO:[SUM 1.4.2] SUM Test fail.

     Impact motherboard: A1SAM-2750F/A1ASM-2550F/A1SRM-2758F
     Affected functions:
     Validation :
         1. Run SUM test or try to BIOS upgrade
         
========================================================================================
Filename: REDFISH_X10_326.bin  version: 3.26  Date: 12-18-2015

Support Motherboard: All X10 MBs
U-Boot build time : 2009.01 (Nov 27 2013)
Java SOL Viewer version : v0.5.9
Java iKVM Viwer version : v1.69 r24

1.  Category: New implementation
    Description:
        Add 10 MBs to support redfish service.
    Impact motherboard: A1SA2,    A1SA7,  A1SAI,  A1SAM, A2SCL, A1SAM_LN7F
                          X10DBT_T, X10QBI, X10QBL, C7X99, C7Z97, X10QRH_PLUS
                          X10SLM,   X10SRE, X10SLH_N6, X10SLM_LN4,

    Affected functions:
    Vagidation :

2.  Category: New Feature
    Description:
        Support 10G temperature reading on AOC-CTGS-i2T card

    Impact motherboard: X10SLD-F with  AOC-CTGS-i2T card
    Affected functions:
    Validation :
        1. Plug in AOC-CTGS-i2T card on X10SLD-F
        2. Power on and check the sensor reading

3.  Category: New Feature
    Description:
        [68016] [EVT] X10DSC-TP4S Rev1.00: Hardware Monitor Test Fail   Solved
        [67763] [EVT] BP (35R0-202142-10100F) FAN headers are not working properly
        [67759] [EVT] Onboard 10G-LAN Temp" Sensor not present in v2.24 firmware

    Impact motherboard: X10DSC-TP4S
    Affected functions:
    Validation :
        1. Check sensor reading

4.  Category: New implementaion
    Description:
        [67778] [SUM 1.6.0] Change LAN mode to supported mode will cause IPMI dead.

    Impact motherboard: All
    Affected functions:
    Validation :
        1. Run the SUM command changebmccfg --file Template/dedicated.xml.

5.  Category: Fix
    Description:
        [67853] NVMe SSD tab in IPMI Web GUI shows traditional HD.

    Impact motherboard: X10QBi
    Affected functions:
    Validation :
        1. Check the WebGUI, if there are no NVMe devices, NVMe page should not present.

6.  Category: Enhancement
    Description:
        [64890] "[Redfish] System stop in "Factory Default" page and cannot back to Login page after press "Factory Default" button"

    Impact motherboard: X10QBi
    Affected functions:
    Validation :
        1. Check the WebGUI will back to Login page after press "Factory Default" button".

7.  Category: Fix
    Description:
        [67634] [1U-1028TP] No Backplane Nuvoton MCU Firmware Update Tool.

    Impact motherboard: X10DRT-P (1U TwinPro)
    Affected functions:
    Validation :
        1. Check the WebGUI will have page to update Nuvoton MCU FW.

8.  Category: Fix
    Description:
        [67642] [SUM v1.60] sum test fails.

    Impact motherboard: X10QBi
    Affected functions:
    Validation :
        1. Run the SMSTC test: TC226 and TC227.
        2. Check the result.


9.  Category: Enhancement
    Description:
        Support FANA on X10SDV 2.0
        Support 10G sensors on all motherboards

    Impact motherboard: X10SDV 1.0 and X10SDV 2.0
    Affected functions:
    Validation :
        1. All X10SDV motherboards should support MB_10G sensor.
        2. If motherboard is X10SDV 1.0, one zones are supported

10. Category: fix
    Description:
        [67919] [REDFISH_X10_325] "service received an authorization error authorized" while try to GET "https://BMC_IP/redfish/v1/...."

    Impact motherboard: All motherboards support Redfish
    Affected functions:
    Validation :
        1.GET "https://BMC_IP/redfish/v1/................" (AccountService, Managers, Systems, or Chassis .....)
          to check whether ok.

11. Category: fix
    Description:
        [67625] [Red Fish] The status reponse incorrect message, 200 OK

    Impact motherboard: All motherboards support Redfish
    Affected functions:
    Validation :
        1. Patch data to "redfish/v1/Managers/1/NTP".
        2. {"NTPEnable": true,"PrimaryNTPServer": "supermicro",
            "SecondaryNTPServer": "1.us.pool.ntp.org","DaylightSavingTime": true}
        3. check status code and error message.

12. Category: Fix
    Description:
    [68052] IERR Assertion in IPMI SEL during ONOFF test with M0 Stepping Broadwell CPU.
    [68012] lots of "Processor IERR Assertion" in IPMI event log when running PCH on/off with IPMI FW v3.25
    [68011] lots of "Processor IERR Assertion" in IPMI event log when running PCH on/off via BMC
    [67969] [firmware v2.24 / redfish v3.25] System generates "Processor - IERR -Assertion" event logs if run Cburn on/off stress.

    Impact motherboard: X10DDW-IN-P, X10DRH-CLN4-P, X10DRH-CT-P, X10DRFR-NT-P, X10DRT-P, X10DRU-I+
    Affected functions:
    Validation :
        1.run PCH on/off.
       PS: only Enable CPUERR feature on X10DRT-P, X10DRU-I+ only.

========================================================================================
Filename: REDFISH_X10_325.bin  version: 3.25  Date: 12-11-2015

Support Motherboard: X10SRH,    X10SLH,     X10SLE,    X10SRL,   X10SLX,      X10SRA,   X10SRD,
                     X10DRU-I+, X10DRT-P,   X10DRG-H,  X10DRW-I, X10DRI-T4+,  X10DDW-I, X10DRFR,
                     X10DRI-T,  X10DRFF,    X10DRFR-T, X10DRD,   X10DRD-L,    X10DRW-E, X10DRG-O+-CPU,
                     X10DRG-Q,  X10DRH-I,   X10DRC,    X10DRL_I, X10DRT_L,    X10DRU_X, X10DRH_LN4,
                     X10DRX,    X10DRU_XLL, X10SRG,    X10SRI,   X10SRW,      X10SDV,   X10SL7
                     X10SLA,    X10SLD,     X10SLE_D,  X10SLL,   X10SLL_PLUS

1.  Category: New implementation
    Description:
        Add 10 MBs to support redfish service.
    Impact motherboard: X10SRG, X10SRI,  X10SRW,   X10SDV, X10SL7
                          X10SLA, X10SLD,  X10SLE_D, X10SLL, X10SLL_PLUS
    Affected functions:
    Validation :

2.  Category: fix
    Description:
        [67625] [Red Fish] The status reponse incorrect message, 200 OK

    Impact motherboard: All motherboards support Redfish
    Affected functions:
    Validation :
        1. Patch data to "redfish/v1/Managers/1/NTP".
        2. {"NTPEnable": true,"PrimaryNTPServer": "supermicro",
            "SecondaryNTPServer": "1.us.pool.ntp.org","DaylightSavingTime": true}
        3. check status code.

3.  Category: fix
    Description:
        [67248] [Redfish] Cannot PATCH Active Directory Role Group Domain with PERIOD

    Impact motherboard: All motherboards support Redfish
    Affected functions:
    Validation :
        1. Connect to "redfish/v1/Managers/1/ActiveDirectory/RoleGroups/"
        2. POST data {"RoleGroupName":"test", "RoleGroupDomain":"bling.com","RoleGroupPrivilege":"Operator"}
        3. PATCH data {"RoleGroupName":"test", "RoleGroupDomain":"10.136.176.96","RoleGroupPrivilege":"Operator"}

========================================================================================
Filename: REDFISH_X10_324.bin  version: 3.24  Date: 11-20-2015

Support Motherboard: X10SRH,    X10SLH,   X10SLE,    X10SRL,   X10SLX,     X10SRA,   X10SRD,
                     X10DRU-I+, X10DRT-P, X10DRG-H,  X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR,
                     X10DRI-T,  X10DRFF,  X10DRFR-T, X10DRD,   X10DRD-L,   X10DRW-E, X10DRG-O+-CPU,
                     X10DRG-Q,  X10DRH-I, X10DRC,    X10DRL_I, X10DRT_L,   X10DRU_X, X10DRH_LN4,
                     X10DRX,    X10DRU_XLL

1.  Category: New implementation
    Description:
        Add 10 MBs to support redfish service.
    Impact motherboard: X10DRC,     X10DRH_LN4, X10DRL_I, X10DRT_L, X10DRU_X,
                          X10DRU_XLL, X10DRX,     X10SLX,   X10SRA,   X10SRD
    Affected functions:
    Validation :

2.  Category: fix
    Description:
        [66840] The Syslog doesn't have the "help" translation on IPMI WebGUI.

    Impact motherboard: All motherboards support Redfish
    Affected functions:
    Validation :
        1. Connect to Syslog in simple chinese page and check "help".

3.  Category: fix
    Description:
        [66931] RedFish_3.23 The "RoleGroupPrivilege" can't be set as "Administrator" (ActiveDirectory)

    Impact motherboard: All motherboards support Redfish
    Affected functions:
    Validation :
        1. Connect to "redfish/v1/Managers/1/ActiveDirectory/RoleGroups"
        2. POST data to add rolegroup with "RoleGroupPrivilege":"Administrator"

4.  Category: fix
    Description:
        [66971] [Red_Fish] Status Return Incorrectly

    Impact motherboard: All motherboards support Redfish
    Affected functions:
    Validation :
        1. Connect to "/redfish/v1/Managers/1/SerialInterfaces/1"
        2. PATCH data with {"InterfaceEnabled": false}.
        3. check http code.

5.  Category: fix
    Description:
        [66905] [Red_fish] Return Message is incorrect

    Impact motherboard: All motherboards support Redfish
    Affected functions:
    Validation :
        1. Connect to "redfish/v1/EventService/Subscriptions/"
        2. POST data {"Destination":"http://www.dnsname.com/Destination1","Context":"user1_test","Events":["Alert","StatusChange"],"Protocol":"Redfish"}
        3. check http code and error message.

6.  Category: fix
    Description:
        [66843] RedFish_3.22 can use the same username to create accounts.

    Impact motherboard: All x10 motherboards
    Affected functions:
    Validation :
        1. create one Administrator and one ReadOnlyUser by using the same name (by Redfish).
        2. login to WebGUI, the user will be Administrator and link to Power Control page to make sure user can config

7.  Category: fix
    Description:
        [67248] [Redfish] Cannot PATCH Active Directory Role Group Domain with PERIOD

    Impact motherboard: All motherboards support Redfish
    Affected functions:
    Validation :
        1. Connect to "redfish/v1/Managers/1/ActiveDirectory/RoleGroups/"
        2. POST data {"RoleGroupName":"test", "RoleGroupDomain":"bling.server","RoleGroupPrivilege":"Operator"}
        3. PATCH data {"RoleGroupName":"test", "RoleGroupDomain":"bling.server","RoleGroupPrivilege":"Operator"}

8.  Category: fix
    Description:
        [67229] No 10G card sensor reading on IPMI web
        [67152] [Red_Fish] Can't detect AOC 10G and 40G Sensor Reading

    Impact motherboard: All motherboards in X10
    Affected functions:
    Validation :
        1. check sensor reading in web page.

========================================================================================
Filename: REDFISH_X10_323.bin  version: 3.23  Date: 11-06-2015

Support Motherboard: X10SRH,   X10SLH,    X10SLE,    X10SRL

                     X10DRU-I+, X10DRT-P, X10DRG-H,  X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR,
                     X10DRI-T,  X10DRFF,  X10DRFR-T, X10DRD,   X10DRD-L,   X10DRW-E, X10DRG-O+-CPU,
                     X10DRG-Q,  X10DRH-I

1.  Category: New implementation
    Description:
        X10DRG-Q and X10SRL support redfish service.
    Impact motherboard: X10DRG-Q and X10SRL
    Affected functions:
    Validation :

2.  Category: Fix
    Description:
        [66810] RedFish_3.22 Vlan can't be enabled if Lan cable is not plug in Dedicate port.
    Impact motherboard: All X10 motherboards which support Redfish
    Affected functions:
    Validation :
        1. "PATCH" Vlan information on /redfish/v1/Managers/1/EthernetInterfaces/1 with data {"VLAN": {"VLANEnable":true,"VLANId": 12}}.

3.  Category: Fix
    Description:
        [66726] Redfoish v3.22] Failed to PATH "SecondaryNTPServer" under URN "https://BMC_IP/redfish/v1/Managers/1/NTP/"
        [66816] [Redfish] Cannot PATH NTP secondary server
    Impact motherboard: All X10 motherboards.
    Affected functions:
    Validation :
        1. Patch SecondaryNTPServer and check value.

4.  Category: fix
    Description:
        [66840] The Syslog doesn't have the "help" translation on IPMI WebGUI.

    Impact motherboard: All motherboards support NVMe
    Affected functions:
    Validation :
        1. Connect to Syslog in Japanese page and check "help"

5. Category: Fix
    Description:
        [66571 ] Redfish 3.21: redfish/v1/Managers/1/LDAP-> Patch operation allows invalid "LDAPPortNumber" value.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. Password will not show in response
        2. IPMI web do display SSL authentication field enabled when set enable.

6. Category: Fix
    Description:
        [66856] RedFish_3.22 "ReadOnlyUser" has the privilege to power control the system by API.
    Impact motherboard: All X10 motherboards which support Redfish
    Affected functions:
    Validation :
        1. Create an ReadOnlyUser account to test.

7. Category: Fix
    Description:
        [66812] Redfish 3.22 allows GET/POST/PATCH operations using HTTP service.
    Impact motherboard: All X10 motherboards which support Redfish
    Affected functions:
    Validation :
        1. Disable "ssl-redirect" in web then access Redfish APP via HTTP, the result should be returned as "Forbidden".

8. Category: Fix
    Description:
        [66809] Redfish API can't report correct DIMM installed with 64GB installed

    Impact motherboard: All X10 motherboards.
    Affected functions:
    Validation :
        1. Install memory which size larger than 32GB then access Redfish to check.


9. Category: Fix
    Description:
        [66464] Redfish_3.20: Boot order change for USB doesnot work it still boots to HDD.
        [66804] [Redfish] BootSourceOverride does not read paramter correctly.

    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. GET boot options in the redfish URI "/redfish/v1/Systems/1".
        2. Then PATCH different options in the same URI with the data:
           {
               "Boot": {
                   "BootSourceOverrideEnabled": ${RULE_YOU_CHOOSE},
                   "BootSourceOverrideTarget": ${OPTION_YOU_CHOOSE}
               }
           }
        3. Reboot to BIOS setup page to check boot order.

10. Category: Fix
     Description:
         [66841] [Redfish] /redfish/v1/Systems/1 is not showing correct total memory size with 64GB memory instal.
         [66809] Redfish API can't report correct DIMM installed with 64GB installed.

     Impact motherboard: All X10 motherboards in support list
     Affected functions:
     Validation :
          1. Install memory which size larger than 32GB then open web to check "Hardware Information" page.

========================================================================================
Filename: REDFISH_X10_322.bin  version: 3.22  Date: 10-30-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H,      X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR,
                     X10DRI-T,  X10DRFF,  X10DRFR-T,     X10DRD,   X10DRD-L,   X10SRH,   X10SLH,
                     X10SLE,    X10DRH-I, X10DRG-O+-CPU

1. Category: Fix
    Description:
        [66681] [IPMI FW 3.20] IPMI Hardware Info Page Shown Wrong Memory Size with 64GB Memory Installed.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. Installed memory which size over 32GB, then go to web to check "Hardware Information" page.

2. Category: Fix
    Description:
        [66674] RedFish is able to get token with http://.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. Access redfish URI via HTTP and HTTPs to check. If you use HTTP, it should reply with error message.
        2. Then go to web to check "http://${BMC_IP}", it should redirect to "https://${BMC_IP}" properly.

3. Category: Fix
    Description:
        [66464 ] Redfish_3.20: Boot order change for USB doesnot work it still boots to HDD.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. GET boot options in the redfish URI "/redfish/v1/Systems/1".
        2. Then PATCH different options in the same URI with the data:
           {
               "Boot": {
                   "BootSourceOverrideEnabled": ${RULE_YOU_CHOOSE},
                   "BootSourceOverrideTarget": ${OPTION_YOU_CHOOSE}
               }
           }
        3. Reboot to BIOS setup page to check boot order.

4. Category: Fix
    Description:
        [66566 ] Redfish:3.21- [Get] redfish/v1/Managers/1/RADIUS feature does not display "RadiusServerIP".
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. GET redfish URI "/redfish/v1/Managers/1/RADIUS" to check the field "RadiusServerIP".
        2. Or you can PATCH this field then GET it back again to see if it is modified or not.

5. Category: Fix
    Description:
        [66571 ] Redfish 3.21: redfish/v1/Managers/1/LDAP-> Patch operation allows invalid "LDAPPortNumber" value.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. Patch wrong IP will receive error message

6. Category: Fix
   Description:
        [66631] [IPMI v3.20] IPMI Event Log Report Wrong Error DIMM Location.
   Impact motherboard: All X10 motherboards.
   Affected functions:
   Validation :
        1.trigger Wrong Error DIMM Location.
        2.Open event log web to check.

7. Category: Fix
   Description:
       [66568] Processor Automatically Throttled Event does not de-assert until after FAN fail events have all been de-asserted
   Impact motherboard: All X10 motherboards.
   Affected functions:
   Validation :
       1. triggering fan fail and then CPU overheat event
       2. lowering the CPU back down to non-overheat range to check whether cause the "Processor Automatically Throttled" event to de-assert.

========================================================================================
Filename: REDFISH_X10_321.bin  version: 3.21  Date: 10-23-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H,  X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR,
                     X10DRI-T,  X10DRFF,  X10DRFR-T, X10DRD,   X10DRD-L,   X10SRH,   X10SLH,
                     X10SLE

1. Category: New implementation
    Description:
        NTP feature is added.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "NTP" in "oem" catagory.
        2. Then 'GET' its URN path: "redfish/v1/Managers/1/NTP".
        3. 'GET' / 'PATCH' are acceptable operations.
        4. "NTPEnable", "PrimaryNTPServer", "SecondaryNTPServer", "DaylightSavingTime" can be 'PATCH'

2. Category: New implementation
    Description:
        LDAP feature is added.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "LDAP" in "oem" catagory.
        2. Then 'GET' its URN path: "redfish/v1/Managers/1/LDAP".
        3. 'GET' / 'PATCH' are acceptable operations.
        4. "LDAPEnabled", "LDAPAuthOverSSL", "LDAPPortNumber", "LDAPServerIP", "LDAPPassword", "LDAPDN", "LDAPSearchbase" can be 'PATCH'

3. Category: New implementation
    Description:
        Radius feature is added.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "RADIUS" in "oem" catagory.
        2. Then 'GET' its URN path: "redfish/v1/Managers/1/RADIUS".
        3. 'GET' / 'PATCH' are acceptable operations.
        4. RadiusEnabled", "RadiusServerIP", "RadiusPortNumber", "RadiusSecret" can be 'PATCH'

========================================================================================
Filename: REDFISH_X10_320.bin  version: 3.20  Date: 10-16-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H,  X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR,
                     X10DRI-T,  X10DRFF,  X10DRFR-T, X10DRD,   X10DRD-L,   X10SRH,   X10SLH,
                     X10SLE

1. Category: Fix
   Description:
       [65106] [Redfish] System stop in "Factory Default" page and cannot back to Login page after press "Factory Default" button
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1. Try factory default and then wait for FW reboot.

2. Category: Fix
   Description:
        [66124] Redfish sensor name has extra characters
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1.GET the URI: redfish/v1/Chassis/1/Thermal to check.

3. Category: Fix
   Description:
        [66274] [RedFish] Redfish 3.19 responses "200 OK" when we PATCH Account password with empty string
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1. Clear user "Password" as empty string then PATCH it under the URL: "https://${BMC_IP}/redfish/v1/AccountService/Accounts/%d"

4. Category: Fix
   Description:
       [65858] Redfish threshold values are not in the right order
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1.connect to Chassis/1/Power to check max and min value in voltage.

5. Category: Fix
   Description:
        [66278] [RedFish] Redfish 3.19 /redfish/v1/Chassis/1/Power/ threshold values are in WRONG order
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1.GET the URI: redfish/v1/Chassis/1/Power to check.

6. Category: Fix
   Description:
        [66088] Redfish voltage sensor reading exceeds MaxReadingRange
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1.GET the URI: redfish/v1/Chassis/1/Power to check.

7. Category: Fix
   Description:
        [66270] [RedFish] /redfish/v1/Systems/1/Processors/ does not show any CPUs
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1.GET the URI: /redfish/v1/Systems/1/Processors/ to check.

========================================================================================
Filename: REDFISH_X10_319.bin  version: 3.19  Date: 10-02-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H,  X10DRW-I, X10DRI-T4+, X10DDW-I, X10DRFR,
                     X10DRI-T,  X10DRFF,  X10DRFR-T, X10DRD,   X10DRD-L,   X10SRH,   X10SLH

1. Category: Fix
   Description:
       [65765] Redfish_3.17: Post SessionService/Sessions/ will have unexcept status over session number limit
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       Continue POST SessionService/Sessions to session number limit is reached.

2. Category: Fix
   Description:
       [65950] Fixed MouseMode- shows "Unknown" mode as supported value issue.
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1. Connect to /redfish/v1/Managers/1/MouseMode and check "Unknown" mode does not show as supported value.

3. Category: Fix
   Description:
       [65898] Redfish_3.18: "redfish/v1/Managers/1/ActiveDirectory/RoleGroups/" type error
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1.connect to Managers/1/ActiveDirectory/RoleGroups/ to check odata.id

4. Category: Fix
   Description:
       [65627] Redfish_3.16: EventService action SubmitTestEvent EventType type error
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1.connect to action SubmitTestEvent with error type and check http status code.

5. Category: Fix
   Description:
       [65858] Redfish threshold values are not in the right order
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1.connect to Chassis/1/Power to check max and min value in voltage.

6. Category: Fix
   Description:
       [65798] Redfish_3.17 : System got 403 forbidden error on X10DDW-i.
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1.connect to /redfish/v1 to check whether can get data.

7. Category: Fix
   Description:
       The role - administrator can NOT change other users' password.
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
       1. Logon as administrator to change other users' password.

========================================================================================
Filename: REDFISH_X10_318.bin  version: 3.18  Date: 09-25-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I,
                     X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD,
                     X10DRD-L, X10SRH, X10SLH

1. Category: New implementation
    Description:
        Active Directory feature is added.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "ActiveDirectory" in "oem" catagory.
        2. Then 'GET' its URN path: "redfish/v1/Managers/1/ActiveDirectory".
        3. 'GET' / 'PATCH' are acceptable operations.
        4. Then 'GET' its URN path: "redfish/v1/Managers/1/ActiveDirectory/RoleGroups".
        5. 'GET' / 'POST'{"RoleGroupName":"xxx", "RoleGroupDomain":"xxx", "RoleGroupPrivilege":"Operator"} are acceptable operations.
        6. Then 'GET' its URN path: "redfish/v1/Managers/1/ActiveDirectory/RoleGroups/[no]".
        7. Then 'GET'/ 'PATCH'/ 'DELETE' are acceptable operations.

2. Category: New implementation
    Description:
        Get/Set iKVM mouse mode feature is added.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. 'GET' Mouse mode setting under "redfish/v1/Managers/1/MouseMode".
        2. Then 'PATCH' to path: "redfish/v1/Managers/1/MouseMode" using {"Mode": "Relative"} or one of the modes.
        3. 'GET' Mouse mode again, and mode is "Relative".
        4. 'GET' / 'PATCH' are acceptable operations.

3. Category: New implementation
    Description:
        Reset to Factory Default feature is added.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. 'POST' to path : "redfish/v1/Managers/1/Actions/Oem/ManagerConfig.Reset".
        2. 'POST' is the only acceptable operations.

4. Category: New implementation
    Description:
        Registries feature is added.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. 'GET' the main entry of Registries "redfish/v1/Registries".
        2. 'GET' the URN path "/redfish/v1/Registries/Base.1.0.0"

5. Category:Fix
   Description:
        [65776] Redfish_3.17: Patching operation does not work as expected for /redfish/v1/Managers/1/EthernetInterfaces/1/VLAN
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. patch {"VLAN": {"VLANEnable": true, "VLANId": 2}}

6 Category:Fix
   Description:
        [65627] Redfish_3.16: EventService action SubmitTestEvent EventType type error
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. 'POST' to path : redfish/v1/EventService/Actions/EventService.SendTestEvent with {"EventType":"Alert"}

========================================================================================
Filename: REDFISH_X10_317.bin  version: 3.17  Date: 09-22-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I,
                     X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD,
                     X10DRD-L, X10SRH

1. Category:Fix
   Description:
        [65306] Redfish_3.15: EventService subscriptions have typo.
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. Goto EventService/Subscriptions/%d URI then check.

2. Category:
        Fix
   Description:
        [65118] Redfish_3.14: Patching operation does not work as expected for /redfish/v1/Managers/1/EthernetInterfaces/1
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. patch {"AutoNeg": true, "FullDuplex": true} to see the result.
        2. patch {"VLAN": {"VLANEnable": true}} will get error message

3. Category: Fix
   Description:
        [65396] [Redfish 3.15]: redfish/v1/Managers/1/LogServices/Log1/Entries - shows incorrect format under "Message:"
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. Read https://xxx.xxx.xxx.xxx/redfish/v1/Managers/1/LogServices/Log1/Entries/XX
        2. Check Message to see the sensor name in [], if there's no snesor name, "[]" will be removed.

4. Category: Fix
   Description:
        [65390] [redfish v3.15] "SenderAddress" string won't show in IPMIWeb GUI while PATCH "SMTP" server data thru API
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. read https://xx.xx.xx.xx/redfish/v1/Managers/1/SMTP to PATCH and GET data
        2. check "SenderAddress" whether match with web gui.

5. Category: Fix
   Description
        [65557][MB: X10DRT-P] Redfish Fw-3.16: "redfish/v1/Chassis/1/Power" doesn't display any voltages if you update fw with factory default
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1.connect to redfish/v1/Chassis/1/Power to check voltages.

6.  Category: Fix
    Description:[65625] Redfish v3.16 : System processors have same Id.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1.get data from https://xx.xx.xx.xx/redfish/v1/Systems/1/Processors/[num]
        2.check [num] with Id whether it's match each.

7.  Category: Fix
    Description:[65565][redfish v3.16] SMTP Server is not working if PATCH server information thru /redfish/v1/Managers/SMTP/ . It won't accept email alert.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1.Do PATCH method on SMTP, then go to web and try sendtestmail or produce event to send email.

========================================================================================
Filename: REDFISH_X10_316.bin  version: 3.16  Date: 09-16-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I,
                     X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD,
                     X10DRD-L, X10SRH

1.  Category: New implementation
    Description:
        Privileged users ("ReadOnlyUser" is NOT included) can only modify theirselves password.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. Create 2 accounts with different privileges(one for "RoldId - Admin" and another is "RoleId - Operator"),
           For example, User 1 name: "supermicro" with "Admin" privilege
                        User 2 name: "dell" with "Operator" privilege
        2. Login with the users "supermicro" and "dell" respectively then modify the passwords of its own and others.
        3. The results should be - only "supermicro" can modify the paswword of itself and can not modify the password of "dell".
           On the other hand - only "dell" can modify itself password.
        4. Notice! Those users with privilege "ReadOnlyUser" can not modify its password, of course, even "Admin" still can NOT
           modify it.

2. Category: Fix
   Description:
        [65390] [redfish v3.15] "SenderAddress" string won't show in IPMIWeb GUI while PATCH "SMTP" server data thru API
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. Do modification on SMTP sender address then GET it back to check.

3. Category: Fix
   Description:
        [65294] [redfish v3.15] SmtpServer won't accept "ip-address" when PATCH /redfish/v1/Managers/SMTP/.
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. Modify the field, "SmtpServer", with IP-formated string then check its repsonse.

4. Category: Fix
   Description:
        [65306] Redfish_3.15: EventService subscriptions have typo.
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. Goto EventService/Subscriptions/%d URI then check.

5. Category: Fix
   Description:
        [65262] [redfish v3.15] won't able change fanmode to "FullSpeed" mode via redfish API / Advanced Reset Client Application
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
        Set fan speed to "FullSpeed" fail
   Validation :
        1. Set fan speed to "FullSpeed" then check its RPM.

6. Category: Fix
   Description:
        [65468] POSTMAN got junk character
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. Read https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power
        2. Check Powersupplies -> "Model", "FirmwareVersion", "SerialNumber"

7. Category: Fix
   Description:
        [65396] [Redfish 3.15]: redfish/v1/Managers/1/LogServices/Log1/Entries - shows incorrect format under "Message:"
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. Read https://xxx.xxx.xxx.xxx/redfish/v1/Managers/1/LogServices/Log1/Entries/XX
        2. Check Message to see the sensor name in []

8. Category: Fix
   Description:
        [65118] Redfish_3.14: Patching operation does not work as expected for /redfish/v1/Managers/1/EthernetInterfaces/1
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. patch "AutoNeg","FullDuplex","VLAN" to see the result.

9. Category: Fix
   Description:
        [65107] [Redfish] BIOS Update function descripe show "Undifined" when IPMI web language set to "Chinese"
   Impact motherboard: All X10 motherboards in support list
   Affected functions:
   Validation :
        1. De-activate the key.
        2. Check the BIOS update page.

========================================================================================
Filename: REDFISH_X10_315.bin  version: 3.15  Date: 09-02-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I,
                     X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD,
                     X10DRD-L, X10SRH
1. Category: New implementation
    Description:
        SMTP feature is added.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. 'GET' all managers under the URN "redfish/v1/Managers/1" to check if there is "SMTP" in "oem" catagory.
        2. Then 'GET' its URN path: "redfish/v1/Managers/1/SMTP".
        3. 'GET' / 'PATCH' are acceptable operations.

2.  Category: fix
    Description:
        [65118] Redfish_3.14: Patching operation does not work as expected for /redfish/v1/Managers/1/EthernetInterfaces/1
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. PATCH hostname under the URN path: "/redfish/v1/Managers/1/EthernetInterfaces/1".
        2. 'GET' the same URN for hostname's change.

3.  Category: fix
    Description:
        [65064] Incorrect PS sensor items in Redfish 3.14
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. Check status https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power

========================================================================================
Filename: REDFISH_X10_314.bin  version: 3.14  Date: 08-27-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I,
                     X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD,
                     X10DRD-L, X10SRH
1.  Category: fix
    Description:
       Remove debug message against Systems/1
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1.verify Systems/1 with LSI enabled.

2.  Category: enhancement
    Description:
       Present all EthernetInterface members against Systems/1/EthernetInterfaces
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1.verify Systems/1/EthernetInterfaces and its child path.

3.  Category: fix
    Description:
        [65010] Redfish API doens't push event to webserver
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1.Do factory default
        2.Create an event sbuscription with destination point to the webserver
        3.Remove platform FAN to generate an event.
        4.Check with your webserver's reaction.

========================================================================================
Filename: REDFISH_X10_313.bin  version: 3.13  Date: 08-26-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I,
                     X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD,
                     X10DRD-L, X10SRH

1.  Category: fix
    Description:
       [64881] [Redfish FW 3.12] Fail To Use Active Directory To Log In Redfish↵
        API.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1.use AD account to login redfish service.

2.  Category: New
    Description:
        X10SRH support redfish service.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :

3.  Category: Fix
    Description:
       [64832] Missing MB_10G Temp in IPMI Web GUI with REDFISH 3.12.

    Impact motherboard: X10DRU-i+, X10DRU-X(LL)
    Affected functions:
    Validation :
        1. After updating FW, power cycle the SUT.
        2. Check the MB_10G Temp1 and Temp2 value.

4.  Category: fix
    Description:
        [64840][IPMI_3.12]API Status report error
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. when pws fail, check status https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power
        2. also check overall status https://xxx.xxx.xxx.xxx/redfish/v1/Systems/1

5.  Category: fix
    Description:
        [64873][v3.12] will not allow save/mount virtual media drive
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1. Allow "\" character in path, \XXX\YYY.iso could be save and mount.

========================================================================================
Filename: REDFISH_X10_312.bin  version: 3.12  Date: 08-22-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I,
                     X10DRFR, X10DRI-T, X10DRFF, X10DRT-HIBF, X10DRFR-T, X10DRD,
                     X10DRD-L
1.  Category: fix
    Description:
        [64571] Inconsistent Fan Fail Behavior between IPMI and Redfish
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1.Disconnecting a system fan while system is online triggers Fan Failure Alert in IPMI.
        2.https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Thermal
        3.to see status and health of Fan sensor.

2.  Category: fix
    Description:
        Voltage sensor is absent but redfish show status OK.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1.https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power
        3.Check voltage sensor status.

3.  Category: fix
    Description:
        Session Audit and AC Power On event log can't show message in log service.
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1.Generate Session Audit and AC Power On event.
        2.https://xxx.xxx.xxx.xxx/redfish/v1/Managers/1/LogServices/Log1/Entries/
        3.Check event entries to see the message.

4.  Category: fix
    Description:
        [64644][IPMI_3.11] HTTPS always pops out the first time after flash
    Impact motherboard: All X10 motherboards in support list
    Affected functions:
    Validation :
        1.check if SSL redirection is enable on ipmi web.

========================================================================================
Filename: REDFISH_X10_311.bin  version: 3.11  Date: 08-14-2015

Support Motherboard: X10DRU-I+, X10DRT-P, X10DRG-H, X10DRW-I, X10DRI-T4+, X10DDW-I,
                     X10DRFR, X10DRI-T, X10DRFF, X10DRFR-T, X10DRD,
                     X10DRD-L

1.  Category: fix
    Description:
        [64504] Redfish IPMI FW 3.10: Redfish responses "200 OK" if we PATCH Accounts Password with empty string
    Impact motherboard:
    Affected functions:
    Validation :
        1. https://xxx.xxx.xxx.xxx/redfish/v1/AccountService/Accounts/3/
        2. [patch] {"UserName":"opera123", "Password":"","RoleId":"Admin"}
        3. Password length should be great than 8.

2.  Category: fix
    Description:
        [64324] Redfish 1.03: Event subscription doesnot display correct error message after creating max number of subscription

    Impact motherboard:
    Affected functions:
    Validation :
        Step1: try to create 16 subscriptions. status code should be 403.

3.  Category: fix
    Description:
        [64439] Redfish IPMI FW 3.10: After upgrading fw with factory default restored, previous event subscriptions remains present.

    Impact motherboard:
    Affected functions:
    Validation :
        1. do factory default
        2. check https://xxx.xxx.xxx.xxx/redfish/v1/EventService/Subscriptions/

4.  Category: fix
    Description:
        [64441]  Redfish IPMI FW 3.10: Redfish responses "200 OK" if we POST ComputerSystem reset operation without parsing payload.

    Impact motherboard:
    Affected functions:
    Validation :
        1.[POST] https://xxx.xxx.xxx.xxx/redfish/v1/Systems/1/Actions/ComputerSystem.Reset without payload data.
        2.will return status cod 400 and error message.

5.  Category: fix
    Description:
        [64505] Redfish 1.03: HTTP response 200 on PATCH Accounts RoleId with unknow type
    Impact motherboard:
    Affected functions:
    Validation :
        1. https://xxx.xxx.xxx.xxx/redfish/v1/AccountService/Accounts/3/
        2. [patch] {"UserName":"opera123","RoleId":"123"}
        3. will return error code and error message.

6.  Category: fix
    Description:
        [64506] Redfish 1.03: Account Collections miss Account after PATCH Account RoldId with unknow type
    Impact motherboard:
    Affected functions:
    Validation :
        1. https://xxx.xxx.xxx.xxx/redfish/v1/AccountService/Accounts/3/
        2. [patch] {"UserName":"opera123","RoleId":"123"}
        3. will return error code and error message.

7.  Category: fix
    Description:
        [64465] [Redfish] Sensor readings missing in IPMI3.10
    Impact Motherboard: MBD-X10DRU-I+-P
    Affected functions:
    Validation :
        1. https://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power

8.  Category: fix
    Description:
        [64535] Redfish Managers/1/SerialInterface/1 InterfaceEnabled not available
    Impact motherboard:
    Affected functions:
    Validation :
        1. https://xxx.xxx.xxx.xxx/redfish/v1/Managers/1/SerialInterface/1

9.  Category: fix
    Description:
        [64556] Redfish /redfish/v1/Systems/1/Processors/2 and /redfish/v1/Systems/1/Processors/1 were swapped
    Impact motherboard:
    Affected functions:
    Validation :
        1. https://xxx.xxx.xxx.xxx/redfish/v1/Systems/1/Processors

10. Category: fix
    Description:
        SerialNumber and PartNumber of /redfish/v1/Systems/1 are from FRU0
    Impact motherboard:
    Affected functions:
    Validation :
        1. https://xxx.xxx.xxx.xxx/redfish/v1/Systems/1

========================================================================================
Filename: REDFISH_X10_310.bin  version: 3.10  Date: 08-07-2015

1. Category: fix
    Description:
    fix the mismtach for odata.type field
    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation :
    1. please use PostMan to verify.

2.  Category: fix
    Description:
    fix the wrong for odata.context url
    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation :
    1. please use PostMan to verify.

3.  Category: fix
    Description:
        [62000] PWS serial number does not match when run
        http://172.31.41.45/redfish/v1/Chassis/1/Power this command
    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation :
        1. http://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Power
        2. Check PowerSupplies -> SerialNumber

4.  Category: fix
    Description:
        [62003] Some sensor readings are showing wrong when run
        http://172.31.41.45/redfish/v1/Chassis/1/Thermal command

    Impact motherboard: X10DRI
    Affected functions:
    Validation :
        1. http://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Thermal
        2. Check "PCH Temp" -> "Status" -> "Health"

5.  Category: fix
    Description:
        [62005] Fans sernsor reading show wrong readings when Fans are not
        plugged in with command http://172.31.41.45/redfish/v1/Chassis/1/Thermal

    Impact motherboard: X10DRI
    Affected functions:
    Validation :
        1. http://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Thermal
        2. Check "FAN" -> "Status" -> "Health"

6.  Category: fix
    Description:
        [62714] Log service entries have no detail & time stamp do not match with IPMI SEL
        when run "http://172.16.140.218/redfish/v1/Managers/1/LogServices/Log1/Entries/2" command

    Impact motherboard:
    Affected functions:
    Validation :
        1. check how many event log in BMC.
        2. Check event entries"http://xxx.xxx.xxx.xxx/redfish/v1/Managers/1/LogServices/Log1/Entries/

7.  Category: fix
    Description:
        [63641] Incorrect data type found on Redfish, using firmware version 1.0.2

    Impact motherboard:
    Affected functions:
    Validation :
        1. http://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Thermal to check "SensorNumber"  data type: Integer

8.  Category: fix
    Description:
        [63946]  redfish/v1/Chassis/1/Thermal: DIMM MIN/MAX Voltage values are not defined properly

    Impact motherboard:
    Affected functions:
    Validation :
        1. http://xxx.xxx.xxx.xxx/redfish/v1/Chassis/1/Thermal to check DIMM MIN/MAX values

8.  Category: fix
    Description:
        [64167] Redfish_FW 1.03: Event Subscription does not accept "ResourceRemoved" added inside “Event Type”

    Impact motherboard:
    Affected functions:
    Validation :
        Step1: Posting subscription->got 201 created
            [Post]http://IP/redfish/v1/EventService/Subscriptions/
            {"Destination":"http://www.dnsname.com/Destination1","Context":"user1_test","EventTypes":["Alert","StatusChange", "ResourceRemoved"],"Protocol":"Redfish"}
        Step2: Validating Subscription:http://IP/redfish/v1/EventService/Subscriptions/

9.  Category: fix
    Description:
        [64324] Redfish 1.03: Event subscription doesnot display correct error message after creating max number of subscription

    Impact motherboard:
    Affected functions:
    Validation :
        Step1: try to create 16 subscriptions

========================================================================================
Filename: REDFISH_X10_103.bin  version: 1.03  Date: 07-27-2015

1. Category: New implementation
    Description:
        enable Https by default.
        Note:please do the reset-to-default
    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation :
        1. please use PostMan to verify.

2.  Category: New implementation
    Description:
        Support NvME and LSI under Systems/1/SimpleStorage/
        Note:  LSI is restricted to LSI 3108 series
    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation :
        1. MUST have NvME SSD or LSI storage card populated in the system.
        2. please use PostMan to verify.
3.  Category: Fix
    Description:
        fix the odata.context_url in some resources
    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation : please use PostMan to verify.

4.  Category: New implementation
    Description:
        Support Fan Mode under /redfish/v1/Chassis/1
    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation : please use PostMan to verify.

5.  Category: New implementation
    Description:
        Support EventService and send out alert through redfish.
    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation : please use PostMan to verify.

========================================================================================
Filename: REDFISH_X10_102.bin  version: 1.02  Date: 06-018-2015

1.  Category: New implementation
    Description:
    Support to create, update and delete resource which is listed as below through redfish.
    It is supposed to be consistent with IPMI web.

    /redfish/v1/Systems/1
    update:
        Boot BootSourceOverrideEnabled BootSourceOverrideTarget IndicatorLED

    /redfish/v1/Managers/1
    update :
        DateTime (Note: value is changed when ntp is disabled)
        DateTimeLocalOffset (Note: value is changed when ntp is enabled)

    /redfish/v1/Managers/1/NetworkProtocol/
    update :
        HTTP
            Enabled
            Port
        HTTPS
            Enabled
            Port
        IPMI
            Enabled
            Port
        KVMIP
            Enabled
            Port
        SNMP
            Enabled
            Port
        SSH
            Enabled
            Port
        VirtualMedia (Note: When KVMIP is disabled, VirtualMedia will get disabled together)
            Enabled
            Port

    /Managers/1/SerialInterfaces/1/
    update :
        BitRate, FlowControl
    /Managers/1/EthernetInterfaces/1/
    update :
        AutoNeg, FullDuplex, SpeedMbps, HostName, VLAN{ VLANEnable, VLANId}, IPv4Addresses{ AddressOrigin, Address, SubnetMask, Gateway}, NameServers

    /AccountService/Account
        UserName Password and RoleId are required to create users.
    /AccountService/Account/[num]
        delete users and update user.
    /SesssionService/
        update :SessionTimeout

    Chassis/1/
        update: AssetTag

========================================================================================
Filename: REDFISH_X10_101.bin  version: 1.01  Date: 06-01-2015

    1.
    Category: New implementation
    Description:
        Support the below new RedFish APIs and redfish authentication following "Redfish Scalable Platforms Management API Specification"
        Be noted that please do reset-to-default and take new settings into effect.

    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation : please use PostMan to verify.
        /redfish/v1/Managers/1/LogServices/
        /redfish/v1/Managers/1/LogServices/Log1/
        /redfish/v1/Managers/1/LogServices/Log1/Entries
        /redfish/v1/Managers/1/LogServices/Log1/Entries/[num]
        /redfish/v1/SessionService/
        /redfish/v1/SessionService/Sessions/
        /redfish/v1/SessionService/Sessions/[num]
        /redfish/v1/Systems
        /redfish/v1/Systems/1
        /redfish/v1/Systems/1/Processors/[num]
        /redfish/v1/Systems/1/EthernetInterfaces/[num]  (MUST install TAS)
        /redfish/v1/Managers/1/LogServices/Log1/Actions/LogService.Reset
        /redfish/v1/Managers/1/Actions/Manager.Reset
        /redfish/v1/Systems/1/Actions/ComputerSystem.Reset
    2.
    Category: Fix
    Description:
        fix the issues under the below urls.
        /redfish/v1/Chassis/1
        /redfish/v1/Chassis/1/Power/Voltages/1
        /redfish/v1/Managers/1/
        /redfish/v1/Managers/1/SerialInterfaces
        /redfish/v1/Managers/1/EthernetInterfaces

    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation :
    3.
    Category: Fix
    Description:
        fix the typo on IPMI web.

    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation :

========================================================================================
Filename: REDFISH_X10_100.bin  version: 1.00  Date: 04-29-2015
1.

    Category: New implementation
    Description:
        Support the below RedFish APIs.
        Be noted that please do reset-to-default and take new settings into effect.

    Impact Motherboard: X10 motherboards
    Affected functions:
    Validation :
        Please install JsonViewer and PostMan plugins in the browser, chrome or Firefox.

        /redfish/v1/
        /redfish/v1/$metadata
        /redfish/v1/Chassis
        /redfish/v1/Chassis/1
        /redfish/v1/Chassis/1/Thermal
        /redfish/v1/Chassis/1/Power
        /redfish/v1/Managers
        /redfish/v1/Managers/1
        /redfish/v1/Managers/1/NetworkProtocol
        /redfish/v1/Managers/1/EthernetInterfaces
        /redfish/v1/Managers/1/EthernetInterfaces/1
        /redfish/v1/Managers/1/SerialInterfaces
        /redfish/v1/Managers/1/SerialInterfaces/1
        /redfish/v1/AccountService
        /redfish/v1/AccountService/Accounts/
        /redfish/v1/AccountService/Accounts/[num]
        /redfish/v1/AccountService/Roles
        /redfish/v1/AccountService/Roles/Admin
        /redfish/v1/AccountService/Roles/Operator
        /redfish/v1/AccountService/Roles/ReadOnlyUser
