﻿Firmware Version: 1.02
Firmware Name: SMT_X11IPMI_102.bin
Firmware CRC: 59FB5CBF
Release date: 07/20/2017
Supported Platform: X11DPL-I, X11DGQ

************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy. Please use programmer to flash FW. *****

1. 
     Category: Fix
     Description:
		PB #82112, No have NVMe message function on IPMI web 
	   
     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Enable VMD mode in BIOS setup
	2) Check BMC NVMe page and there is no 'Eject' button and 'Inject' button
	3) Disable VMD mode in BIOS setup
	4) Check BMC NVMe page and there is 'Eject' button and 'Inject' button
	
2. 
     Category: Fix
     Description:
		PB #82200, Redfish test fail
		PB #82283, Redfish and SMCIPMITool cannot make connection to IPMI v1.01
	   
     Infected Motherboard: X11DPL-I, X11DGQ
     Affected functions:
     Validation :
	1) Check RedFish API
	
3. 
     Category: Fix
     Description:
		PB #81581, System X11DGP rev1.00 failed to power up after 841 cycles of SLAN IPMI on/off. 30% packet loss when I pinged to the SUT
		PB #81485, X11DGQ rev 1.00 failed after 9 cyles of AC on/off locally. The system couldn't be able to shut down
	   
     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Run cburn on/off

4. 
     Category: Fix
     Description:
		PB #81949, [SUM] Run TC 218 "pmProvision" with SUM (2.0.0(2017/07/07)) and it will return "Required device does not exist ", but run SUM (2.0.0(2017/06/16)) is pass
	   
     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Run SMSTC SUM ECO mode

5. 
     Category: Fix
     Description:
		PB #82307, with wrong default fan speed control mode 
	   
     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Run BMC factory default setting
	2) Check fan mode and it should be optimal
	
-----------------------------------------------------------------------------	

Firmware Version: 1.01
Firmware Name: SMT_X11IPMI_101.bin
Firmware CRC: A94C68A7
Release date: 07/17/2017
Supported Platform: X11DPL-I, X11DGQ

************ Please use programmer to flash FW. *****
************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy. Please use programmer to flash FW. *****

1. 
     Category: Fix
     Description:
		resolve fan curve invert problem (falling <-> rising)
	   
     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Verify fan control curve
	
2. 
     Category: Feature
     Description:
       VROM support for protecting key data across BMC significant changes

     Infected Motherboard: ALL
     Affected functions:
     Validation :
	1) Verify BMC FW update
	
3. 
     Category: Fix
     Description:
        PB#81882 After run SUM test case 215, IPMI web refused all connection
		PB#81975 [BIOS ECO v1.00] [ SUM 2.0.0(2017/07/07) ] Test fail.  
		PB#82157 [SUM] IPMI ECO mode test fail 
		
     Infected Motherboard: ALL
     Affected functions:
     Validation :
	1) Verify SUM ECO mode
	
4. 
     Category: Fix
     Description:
        PB#81953 Voltage events during on/off 
		
     Infected Motherboard: ALL
     Affected functions:
     Validation :
	1) cburn on/off and check event log
	
5. 
     Category: Fix
     Description:
        PB#82082 IPMI SEL DIMM location is not meet MB silkscreen
		
     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Produce 'Uncorrectable Memory ECC' event
	2) Check web event log page
	
6. 
     Category: Fix
     Description:
        PB#81581 System X11DGQ rev1.00 failed to power up after 841 cycles of SLAN IPMI on/off. 30% packet loss when I pinged to the SUT  
		
     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :	 
	1) Run cburn on/off
	
7. 
     Category: Fix
     Description:
        PB#82052 [IPMI] NO NIC Temperature reading on IPMI on SLOT5. 
		
     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :	 
	1) install RSC-G-A66 on SLOT5 and install AOC-S40G-i2Q 
	2) Check NIC temperature

-----------------------------------------------------------------------------	

Firmware Version: 1.00
Firmware Name: SMT_X11IPMI_100.bin
Firmware CRC: 9906E831
Release date: 07/04/2017
Supported Platform: X11DPL-I, X11DGQ

************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy. Please use programmer to flash FW. *****

1. 
     Category: Fix
     Description:
		Fix no prochot event and no thermal trip event
	   
     Infected Motherboard: X11DPL-I, X11DGQ
     Affected functions:
     Validation :
	1) Heat up CPU temperature
	2) check prochot event log and thermal trip event log

2. 
     Category: Fix
     Description:
       resolve GPU fan curve fail when GPU cards are not full

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check GPU fan control
	
-----------------------------------------------------------------------------	

Firmware Version: 0.15
Firmware Name: SMT_X11IPMI_015.bin
Firmware CRC: 141DD688
Release date: 06/28/2017
Supported Platform: X11DPL-I, X11DGQ

************ Please didn't preserve SDR when updated this FW ******
************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy. Please use programmer to flash FW. *****

1. 
     Category: Enhance
     Description:
       Add offset '-2' to Inlet tempearture
	   
     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check Inlet tempearture sensor reading

2. 
     Category: Enhance
     Description:
       force FAN full speed when ac power on

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check FAN RPM when ac power on

3. 
     Category: Fix
     Description:
       Fix GPU force throttling

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Install four NVidia M40 GPU
	2) Check GPU throttle state
	
4. 
     Category: Fix
     Description:
        Fix wrong KVM port when run 'sum GetBmcCfg' command
	
     Infected Motherboard: ALL
     Affected functions:
     Validation :
	1) Run 'SUM GetBmcCfg' command
	2) Check KVM port in output result
	
5. 
     Category: Enhance
     Description:
        Modified sensor thresholds based on 'X11 GPU Thermal Design Guide Rev Draft B_20170526'

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check sensor thresholds
	
6. 
     Category: Enhance
     Description:
        New GPU fan control based on 'X11 GPU Thermal Design Guide Rev Draft B_20170526'

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check GPU fan control

7. 
     Category: Enhance
     Description:
        Modified sensor thresholds based on 'SIM_TDG REV. 4.06 BMC Thresholds (06162017)'

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Check sensor thresholds
	
8. 
     Category: Fix
     Description:
        PB #81278, [X11DGP rev1.00] Dedicated LAN couldn't automatically update IP addess when I switched lan cable from PXE to locally 

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Prepare two switch
	2) First switch is 192.xxx.xxx.xxx and second switch is 172.30.xx.xx
	3) Plug in LAN calbe to first switch and BMC IP must be 192.xxx.xxx.xxx
	4) Switch LAN cable to second switch and BMC IP must be 172.30.xxx.xxx
	
9. 
     Category: Fix
     Description:
        PB #81485, X11DGQ rev 1.00 failed after 9 cyles of AC on/off locally. The system couldn't be able to shut down 

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Run AC on/off stress and check BMC dedicated LAN 
	
10. 
     Category: Fix
     Description:
        PB #81275, [IPMI] GPU temperature threshold is wrong. 

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check GPU temperature threshold
	
-----------------------------------------------------------------------------	

Firmware Version: 0.14
Firmware Name: SMT_X11IPMI_014.bin
Firmware CRC: 171050D6
Release date: 06/15/2017
Supported Platform: X11DPL-I, X11DGQ

************ Please didn't preserve SDR when updated this FW ******
************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy. Please use programmer to flash FW. *****

1. 
     Category: Fix
     Description:
       PB #80871, [IPMI] IPMI sensors are abnormal on IPMI 0.13
	   PB #81183, X11DGQ rev1.00's ipmi sensors didn't work 	
	   
     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check sensor reading

2. 
     Category: Fix
     Description:
       Fix TC212/TC409/TC410/TC502 for PB #79218, [ SUM 2.0.0(2017/04/13) ] SUM Test failed. 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Run SMSTC testing	

3. 
     Category: New
     Description:
       Support GPU sensor

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Install GPU and check sensor reading
	
4. 
     Category: Fix
     Description:
        Fan RPM didn't run duty cycle 50% during ac power on
		Fan RPM didn't run duty cycle 100% during bmc reset

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) AC power on and check Fan RPM if run duty cycle 50%
	2) Run BMC reset and check Fan RPM if run duty cycle 100%
	
5. 
     Category: Fix
     Description:
        Cannot show Processor info via redfish

     Infected Motherboard: ALL
     Affected functions:
     Validation :
	1) Check https://BMCIP/redfish/v1/Systems/1/Processors/
	
6. 
     Category: Fix
     Description:
        Fix wrong 'Peripheral Temp' reading

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check 'Peripheral Temp' sensor reading

7. 
     Category: New
     Description:
        Support system Inlet temperature

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check 'Inlet Temp' sensor reading	
	
-----------------------------------------------------------------------------	

Firmware Version: 0.13
Firmware Name: SMT_X11IPMI_013.bin
Firmware CRC: BAE0433B
Release date: 06/01/2017
Supported Platform: X11DPL-I, X11DGQ

************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy. Please use programmer to flash FW. *****

1. 
     Category: Enhance
     Description:
       Change I2C address of system MUX to 0xE2

     Infected Motherboard: X11DPL-I PCB v1.02
     Affected functions:
     Validation :
	1) Install 10G/40G LAB card
	2) check BMC sensor reading

-----------------------------------------------------------------------------	

Firmware Version: 0.12
Firmware Name: SMT_X11IPMI_012.bin
Firmware CRC: 6134B811
Release date: 5/26/2017
Supported Platform: X11DPL-I, X11DGQ

************ Please don't preserve SDR during FW updated ***********
************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy. Please use programmer to flash FW. *****

1. 
     Category: Fix
     Description:
       PB #80298, [IPMICFG] "ipmicfg -k" fail

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Run IPMICfg test case 101

2. 
     Category: Fix
     Description:
       PB #80428, [IPMI] No Temperature reading for AOM-PIO-i2XT

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Install AOM-PIO-i2XT
	2) Check 10G temperature sensor

-----------------------------------------------------------------------------	

Firmware Version: 0.11
Firmware Name: SMT_X11IPMI_011.bin
Firmware CRC: E79E9C6D
Release date: 5/23/2017
Supported Platform: X11DPL-I, X11DGQ

************ Please don't preserve SDR during FW updated ***********
************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy. Please use programmer to flash FW. *****

1. 
     Category: Fix
     Description:
       PB #80333, [IPMI/HW] Memory sensor labels don't match with MB silkscree. 

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check Memory sensors and MB silkscreen


2. 
     Category: Fix
     Description:
       PB #80373, [IPMI] PCH temperature reading is abnormal.  

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check 'Peripheral Temp' sensor

3. 
     Category: Fix
     Description:
       PB #80375, [IPMI] Abnormal IPMI Event logs shows on IPMI Web. 

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check event log

4. 
     Category: Enhance
     Description:
       Enable temperature record

     Infected Motherboard: ALL
     Affected functions:
     Validation :
	1) Check 'Power/Temperature Record' page

-----------------------------------------------------------------------------	

Firmware Version: 0.10
Firmware Name: SMT_X11IPMI_010.bin
Firmware CRC: 4A8C7BB6
Release date: 5/16/2017
Supported Platform: X11DPL-I, X11DGQ

************ Please don't preserve SDR during FW updated ***********
************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy. Please use programmer to flash FW. *****

1. 
     Category: Fix
     Description:
       PB #79384,Function fail : NVMe add on card SSD information can't read by BMC 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Used BPN-SAS3-826A-N4 v1.11 and AOC-SLG3-2E4T rev.1.01 to setup SUT
	2) Insert NVMe and check BMC web

2. 
     Category: Fix
     Description:
       PB #79723,The LED is red and keep blinking from “ i ” icon on the front panel control after I update IPMI FW from 0.08 to latest 0.09 version  

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) AC cycle the system
	2) Check front panel LED

3. 
     Category: Fix
     Description:
       PB #79938,[SSM] Some IPMI commands were fail on SSM web. 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Check deploy OS function of SSM

4. 
     Category: Enhance
     Description:
       Change VBAT sensor to discrete sensor

     Infected Motherboard: ALL X11DP platform
     Affected functions:
     Validation :
	1) Follow different voltage range and VBAT sensor should show different status
		Below 2.5V:	Battery failed
		2.5V – 2.7V: 	Battery low (predictive failure)
		2.7V or above:	Battery presence detected

-----------------------------------------------------------------------------	

Firmware Version: 0.09
Firmware Name: SMT_X11IPMI_009.bin
Firmware CRC: 24E51012
Release date: 4/28/2017
Supported Platform: X11DPL-I, X11DGQ

************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy. Please use programmer to flash FW. *****

1. 
     Category: New
     Description:
       Support X11DGQ

     Infected Motherboard: X11DGQ
     Affected functions:
     Validation :
	1) Check BMC functions

2. 
     Category: Fix
     Description:
       Fix incorrent VDIMM and 1.05PCH sensor reading value

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Check VDIMM and 1.05PCH sensor reading value
	
3. 
     Category: Fix
     Description:
       PB #79385, Functin fail : micro SD can't do any read/write function by IPMI command. 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Insert micro SD card
	2) Run 'SMCIPMITool IP ADMIN ADMIN ipmi oem generalfileupload 12' to upload file
	3) Run 'SMCIPMITool IP ADMIN ADMIN ipmi oem generalfiledownload 18' to download file 
	
4. 
     Category: Fix
     Description:
       PB #78975, IPMI WEBUI may lost connection when you use share LAN interface to "send power cycle command via ipmitool" or “just push the physical Power Switch to turn off” the system 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) use share LAN interface to "send power cycle command via ipmitool" 
	2) Check BMC LAN status
	
5. 	
     Category: Fix
     Description:
       PB #79218, [ SUM 2.0.0(2017/04/13) ] SUM Test failed. 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) RUN LAB SMSTC Testing for IPMI ECO 

6. 	
	Category: Fix
	Description: 
		fix - inband(Linux OS) ipmitool cannot work after bmc reset.

	Infected Motherboard: X11DPL-I
	Affected functions: inband ipmitool
	Validation :
	1) Enter Linux OS and ipmitool bmc info 
	2) ipmitool bmc reset cold
	3) ipmitool bmc info will fail before bmc boot ready.
	4) ipmitool bmc info will work well after bmc boot ready.

7. 	
	Category: New
	Description: 
		Add save button in event log page and system event log page

	Infected Motherboard: ALL
	Validation :
	1) Press save button in event log page and check file
	2) Press save button in system event log page and check file

8. 	
	Category: Fix
	Description: 
		Fix power control fail after doing power cycle in web page

	Infected Motherboard: X11DPL-I
	Validation :
	1) Doing power cycle in web page
	2) Check page status

9. 	
	Category: Fix
	Description: 
		Wrong VRM sensor reading

	Infected Motherboard: X11DPL-I
	Validation :
	1) Check CPU VRM sensor reading and memory VRM sensor reading

10. 	
	Category: New
	Description: 
		Support Winbond W25Q256JVFIQ as BIOS flash

	Infected Motherboard: ALL
	Validation :
	1) Used Winbond W25Q256JVFIQ as BIOS flash
	2) Run BIOS update from BMC Web	
	
-----------------------------------------------------------------------------	

Firmware Version: 0.08
Firmware Name: SMT_X11IPMI_008.bin
Firmware CRC: F70CC4AE
Release date: 4/06/2017
Supported Platform: X11DPL-I

************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy *****

1. 
     Category: Fix
     Description:
       Fix PB #78666, IPMI no 40G AOC sensor

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Install 40G AOC card and check sensor reading

2. 
     Category: Fix
     Description:
       Fix PB #78381, IPMI WebGUI can not log in by "User" level 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Login web by "User" level

3. 
     Category: Fix
     Description:
       Fix PB #78383, No CPU Auto-throttle reporting event log

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Remove CPU fan and run CPU stress
	2) Waiting CPU happen throttle

4. 
     Category: Fix
     Description:
       Fix PB #78697, IPMI WEBUI may lost connection when you change the LAN interface from failover to share / dedicated 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Change LAN interface from failover to share / dedicated 

-----------------------------------------------------------------------------

Firmware Version: 0.07
Firmware Name: SMT_X11IPMI_007.bin
Firmware CRC: 30CE9E6A
Release date: 3/17/2017
Supported Platform: X11DPL-I

************ BMC revision older than 06 can't update to this FW by web update or adupdate utiltiy *****

1. 
     Category: Fix
     Description:
       Fix PB #78327, Keyboard makes clicking noise in BIOS Setup Menu and UEFI built-in Shell with IPMI FW:0.06. 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Check UEFI if show incorrect keyboard input

2. 
     Category: Fix
     Description:
       Fix PB #78372, No FANs sensor 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
	1) Check fan sensor reading

-----------------------------------------------------------------------------

Firmware Version: 0.06
Firmware Name: SMT_X11IPMI_006.bin
Firmware CRC: CFBC37E2
Release date: 3/10/2017
Supported Platform: X11DPL-I

************ Please update this FW by Programmer or Socflash **********************
************ Old FW can't update to this FW by web update or adupdate utiltiy *****

1. 
     Category: Fix
     Description:
       Fix PB #78008, Power consumption by entire platform subsystem is very unstable after power policy is triggered. 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Follow PB #78008 to verify

2. 
     Category: Fix
     Description:
       Fix PB #77957, BIOS will clear LAN MAC address when Flash BIOS by IPMI webgui

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Flash system MAC
		2) Flash BIOS FW by IPMI web
		3) Check system MAC

3. 
     Category: Fix
     Description:
       Fix PB #77596, No CPLD version in BIOS Setup Menu and IPMI Web 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check CPLD version in IPMI web
		
4. 
     Category: New
     Description:
       Add PW Consumption sensor

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check sensor reading
		
-----------------------------------------------------------------------------

Firmware Version: 0.05
Firmware Name: SMT_X11IPMI_005.bin
Firmware CRC: 3C47C34D
Release date: 2/24/2017
Supported Platform: X11DPL-I

************ Please use socflash or programmer to flash this FW, because this FW support new GUID and FW tag **********************

1. 
     Category: Fix
     Description:
       Fix PB #77131, SOL is not workable

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check SOL function

2. 
     Category: Fix
     Description:
       Fix PB #77598, Keyboard makes clicking noise in BIOS Setup Menu and UEFI built-in Shell some times 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check UEFI screen and BIOS setup menu

3. 
     Category: Enhancement
     Description:
       Used new GUID '9101MS' and new FW tab 'SMCIs_FW'

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Used 0.04 to do web update and BMC will show "Can't downgrade"
		2) It only can be upgraded FW to use revision that be bigger than 0.04

4. 
     Category: Enhancement
     Description:
       change the copyright to 2017

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check copyright in BMC web

-----------------------------------------------------------------------------

Firmware Version: 0.04
Firmware Name: SMT_X11IPMI_004.bin
Firmware CRC: 885FF6A7
Release date: 2/10/2017
Supported Platform: X11DPL-I


1. 
     Category: Fix
     Description:
       PB #77122, Memory temp sensor name on IPMI Web is incorrect 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check VRM sensor name and memory temp sensor name

2. 
     Category: Fix
     Description:
       PB #77143, No Chassis Intru sensor in sensor reading 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check Chassis Intru sensor

3. 
     Category: Fix
     Description:
       PB #77142, No Hardware information page on IPMI Web 

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check Hardware information page

4. 
     Category: Fix
     Description:
       PB #77133, IPMI WebGUI Configuration page display is abnormal.

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check Configuration page
				
-----------------------------------------------------------------------------
		
Firmware Version: 0.03
Firmware Name: SMT_X11IPMI_003.bin
Firmware CRC: 181F2641
Release date: 1/30/2017
Supported Platform: X11DPL-I


1. 
     Category: New
     Description:
       BMC heatbeat works

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check BMC heatbeat

2. 
     Category: New
     Description:
       BIOS flash works

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Flash BIOS thru BMC web

3. 
     Category: New
     Description:
       Shared NIC works

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check the shared NIC

4. 
     Category: New
     Description:
       New OOB function support

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check OOB functions

-----------------------------------------------------------------------------

Firmware Version: 0.02
Firmware Name: SMT_X11IPMI_002.bin
Firmware CRC: 72D236A9
Release date: 1/12/2017
Supported Platform: X11DPL-I


1. 
     Category: New
     Description:
       Bring up BMC FW

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check BMC function

-----------------------------------------------------------------------------

Firmware Version: 0.01
Firmware Name: SMT_X11IPMI_001.bin
Firmware CRC: 50654E41
Release date: 12/05/2016
Supported Platform: X11DPL-I


1. 
     Category: New
     Description:
       Support X11DPL-I BMC function

     Infected Motherboard: X11DPL-I
     Affected functions:
     Validation :
		1) Check BMC function
