1. The latest IPMI/BMC firmware for this system that supports Redfish
2. Any release notes or update instructions
3. Recommendations for safely upgrading the firmware (e.g., via Web UI or SUM tool)
- **Board Part Number:** X10DRU-i+
You will need to access the link below and download the firmware.
https://www.supermicro.com/en/support/resources/downloadcenter/firmware/MBD-X10DRU-i+/BIOS
After downloading, you can update via USB flash drive or on the Web GUI.
I would recommend using the Web GUI for X10.
You can find the update page under Maintenance > Firmware Update.
Enter update mode and upload the firmware.