There is a workaround via BIOS setting, "NVMe Firmware Source." It can be from changed default ("AMI Native") to "Vendor Defined."
If changed to "Vendor Defined," a password may not be required to boot the system.
Please Note:
Self-Encrypting Drive (SED) is designed to protect your data by requiring a password prompt immediately upon powering on your system. AMI Native follows the NVMe SED standard, its overall security level is higher
Different NVMe controller vendors may use their own unlocking process in this mode, which means the BIOS cannot guarantee consistent behavior.
For the highest and consistent level of security, we recommend keeping AMI Native as the default setting.