Quick Reference
|
Jumper |
Description |
Default Setting |
|---|---|---|
|
JBT1 |
CMOS Clear |
Open (Normal) |
|
JPT1 |
Onboard TPM Enable/Disable |
Pins 1–2 (Enabled) |
|
JRU1 |
Unit Identifier (UID) |
Pins 1-2 (UID) |
| LED | Description | Status |
|---|---|---|
| LED3 | BMC Heartbeat LED | Blinking Green: BMC Normal |
| LED4 | Power LED | LED On: Onboard Power On |
|
Connector |
Description |
|---|---|
|
BT1 |
Onboard Battery |
|
FAN1–FAN7 |
6-pin Fan Headers |
|
FAN8–FAN10 |
4-pin Fan Headers |
|
JAIOM1 |
Supermicro Advanced Input/Output Module (AIOM) PCIe 5.0 x16 Connector |
|
JAIOM2SB1 |
Supermicro Advanced Input/Output Module (AIOM2) Sideband Connector |
|
JBPNI²C1, JBPNI²C2 |
4-pin BMC External I²C Headers for Backplane |
|
JFP1 |
Front Control Panel Header |
|
JIO1 |
Front BMC and Onboard VGA/USB/LAN Module Connector |
|
JL1 |
Chassis Intrusion Header |
|
M.2-C1, M.2-C2 |
M.2 PCIe 5.0 x2 Slots in 25110/22110/2280 Form Factor |
|
JNCSI1 |
Network Controller Sideband Interface (NC-SI) Connector |
|
JNVI²C1, JNVI²C2 |
NVMe SMBus I²C Headers for PCIe SMBus Clock and Data Connections with Hot-Plug Support |
|
JPWR1–JPWR11 |
8-pin Power Connectors |
|
JRK1 |
Intel RAID Key Header |
|
JTPM1 |
Trusted Platform Module/Port 80 Connector |
|
M.2_MH1–M.2-MH4 |
M.2 Mounting Holes |
|
P1_PE4 0–7 VPP I²C |
MCIO PCIe 5.0 x8 Connector Support |
|
P1_PE4 8–15 VPP I²C |
MCIO PCIe 5.0 x8 Connector Support |
|
P1_PE5 0-7 VPP I²C |
MCIO PCIe 5.0 x8 Connector Support |
|
P1_PE6 0–7 |
MCIO PCIe 5.0 x8 Connector Support |
|
P1_PE5 8–15 VPP I²C |
MCIO PCIe 5.0 x8 Connector Support |
|
P1_PE6 8–15 |
MCIO PCIe 5.0 x8 Connector Support |
|
P1_PE7 0–7 |
MCIO PCIe 5.0 x8 Connector Support |
|
P1_PE7 8–15 |
MCIO PCIe 5.0 x8 Connector Support |
|
P1_PE8 0–7 VPP I²C |
MCIO PCIe 5.0 x8 Connector Support |
|
P1_PE8 8–15 VPP I²C |
MCIO PCIe 5.0 x8 Connector Support |
|
P1 SLOT1, P1 SLOT2 |
PCIe 5.0 x16 in 4C Slots |
|
PSU1, PSU2 |
Power Supply Unit 1/Power Supply Unit 2 for System Power Use |
|
SRW1, SRW2 |
M.2 Holding Screws |
|
USB2/3 |
Front Accessible USB 3.2 Gen 1 Header |
Note: Jumpers, connectors, switches, and LED indicators that are not described in these tables are for manufacturing testing purposes only, and are not covered in this manual.