 |
|
 |
| AS-1022G-URF |
- A+ Server 1022G-URF (Black)
|
| |
|
| CPU |
- Dual 1944-pin Socket G34
- Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
| |
- 3.2GHz Hyper-Transport (HT3) link
|
| Chipset |
- AMD chipset SR5670 / SP5100
|
| Note |
- Supports 6000 processors with Max ACP 80W (TDP 115W)
|
| |
|
|
| Memory Capacity |
- 16 DIMM sockets
- Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC 1600/1333/1066 SDRAM in 16 DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
| Memory Type |
- DDR3 1600/1333/1066 MHz Registered ECC Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
|
| SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA |
|
| Super I/O |
|
| |
|
|
| 1U |
- 1x UIO and 1x PCI-e 2.0 x16
|
| |
|
|
| SATA |
|
| LAN |
- 2x RJ45 ports and 1x RJ45 Dedicated LAN supports IPMI
|
| USB |
- 7x USB 2.0 ports
- 2x Rear, 4x header, 1x Type A
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial port
- 1 serial port header
|
| Others |
|
| |
|
|
| BIOS Type |
- 16Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Package |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off Button
- System Reset Button
- UID Button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| Ports |
- 2x USB & DB9 COM port tray
|
| |
|
|
| Hot-swap |
- 4x 3.5" SAS / SATA Hot-swap drive trays
- SAS or enterprise SATA HDD only recommended
|
| |
|
|
| DVD-ROM |
|
| |
|
|
| 1x 1U SAS / SATA backplane |
|
|
|
| Fans |
- 4x 4cm Counter-rotating PWM fans
|
| |
|
|
| 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C |
| AC Voltage |
- 700W: 100 - 140 V, 50-60 Hz, 8.5-6 Amp
- 750W: 180 - 240V, 60-50 Hz, 5-3.8 Amp
|
| DC Output +5V standby |
|
| DC Output +12V |
- 700W: 58 Amp @ 100-140V
- 750W: 62 Amp @ 180-240V
|
| With Power Distributor |
- +5V: 25 Amp
- +3.3V: 12 Amp
- -12V: 0.6 Amp
|
| Certification |
 Gold Certified
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU switching voltage regulator
|
| FAN |
- Total up to 8-fan status tachometer monitoring
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
- UID/Remote LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
