A+ Server 2042G-72RF4
  A+ Products  Systems   2U   [ 2042G-72RF4 ]








Integrated Board
H8QG7-LN4F


Key Features

1. Four AMD Opteron™ 6000 series

    processors (Socket G34)

    16/12/8/4-Core ready; HT3.0 Link

    support
2. Up to 1TB DDR3 1600MHz ECC

    Registered DIMM; 32x DIMM sockets
3. 2x PCI-E 2.0 x16 slots

    2x PCI-E 2.0 x8 slots

    (Low profile add-on card)
4. LSI 2208 8-port 6 Gbps SAS2 controller;

    HW RAID 0, 1, 5, 6, 10, 50

    (1GB cache)
5. 6x Hot-swap SAS/SATA Drive Bays
6. 1400W High-efficiency

    Redundant Digital Power Supplies

    Platinum Certified (94%)
7. Integrated IPMI 2.0 with Dedicated LAN


Available Colors: Black    


 BIOS
 IPMI
 


Product SKUs
AS-2042G-72RF4
  • A+ Server 2042G-72RF4 (Black)
 
Motherboard
Super H8QG7-LN4F
 
Processor/Chipset
CPU
  • Quad 1944-pin Socket G34
  • Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • AMD SR5690/SR5670/SP5100 Chipset
 
System Memory
Memory Capacity
  • 32 DIMM sockets
  • Support up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
  • Quad channel memory bus
  • For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
SAS
  • LSI 2208 8-port SAS2 controller
  • HW RAID 0, 1, 5, 6, 10, 50, 60 (1GB cache)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® I350 controller, 4-Port Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2 graphics
Super I/O
  • Winbond® W83527 chip
 
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
SAS
  • SAS2 x8
LAN
  • 4 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2x Rear, 4x internal header, and 1x type A
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
 
Expansion Slots
PCI-Express
 
 
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-828TQ+-R1K43LPB
 
Dimensions
Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 28.2" (716mm)
Gross Weight 69 lbs (31.3kg)
Available Colors Black
 
Front Panel
Buttons • Power On/Off button

• System Reset button
LEDs • Power LED

• Hard drive activity LED

• 2x Network activity LEDs

• System Overheat LED

• Power fail LED
 
Drive Bays
Hot-swap
  • 6x 3.5" SAS/SATA Hot-swap drive trays
  • Enterprise SATA HDD only recommended
 
SAS / SATA Backplane
1x 2U SAS / SATA backplane w/ SES-II
System Cooling
Fans 6x 80mm 6500 RPM fans
 
Power Supply
Redundant 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
AC Voltage
  • 100-240 V, 50-60 Hz, 15 Amp max
+12V
  • 100 Amp/115 Vac
  • 117 Amp/230 Vac
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 25 Amp
  • -12V: 0.6 Amp
Certification Platinum Level Certified  

  Platinum Certified
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, sVBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 9-fan status tachometer monitoring
  • Up to nine 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control

     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 9x fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8QG7-LN4F 1 Super H8QG7-LN4F Motherboard
Chassis CSE-828TQ+-R1400LPB 1 2U Chassis
Air Shroud MCP-310-82801-0N 1 Air shroud for SC828 (H8QGL,H8QG6,H8Qi6,X7QC3,H8QM3,X6QT8,H8QM8)
Cable 1 CBL-0388L-01 2 MINI SAS-4 SATA (RA),INT,75/75/90/90CM,75CM SB,30AWG
Heatsink / Retention SNK-P0043P 4 2U Passive CPU HS for AMD Socket G34
IO Shield 1 MCP-260-00060-0N 1 Standard I/O shield for H8QG7+ -LN4F with EMI Gasket


Optional Parts List
  Part Number Qty Description
Battery Backup BTR-0022L-LSI00279 - LSI00279 IBBU09 BATTERY BKUP FOR SAS2208
Extension Kit MCP-450-00001-0N - LSI iBBU09 extension kit (to installed at 2.5" HDD location)
Adaptor HDD carrier MCP-220-00043-0N - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.