SuperServer 5019P-WTR

  Products  Systems  1U   [ 5019P-WTR ]

SYS-5019P-WTR



Integrated Board
Super X11SPW-TF

Views: | Angled View | Top View |
| Front View | Rear View |

Key Applications
- DB Processing & Storage
- Data Center Applications
- Firewall Applications

 
Key Features
1. Single Socket P (LGA 3647) supports
    2nd Gen Intel® Xeon® Scalable
    processor (Cascade Lake/Skylake)
2. 6 DIMMs; up to 1.5TB 3DS ECC
    DDR4-2933MHz RDIMM/LRDIMM
3. 2 PCI-E 3.0 x16 (FHFL) slots,
    1 PCI-E 3.0 x8 (LP) slot
4. 4 Hot-swap 3.5" SATA3 drive bays
5. 2x 10GBase-T ports with Intel
    X722 + X557
6. 1 VGA, 2 COM, 2 USB 3.0, 2 USB 2.0
7. 2 SuperDOM (Disk on Module) ports
8. 500W Redundant power supplies
    Platinum Level Certified


 Drivers & Utilities   BIOS   IPMI   Tested Memory  Tested M.2 List   Manuals    OS Certification Matrix    Quick-References Guide  Compatible GPU List  Drive Options   Network Card (AOC) Matrix

Product SKUs
SYS-5019P-WTR
  • SuperServer 5019P-WTR (Black)
 
Motherboard

Super X11SPW-TF
 
Processor
CPU
  • Single Socket P (LGA 3647)
  • 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors
  • Support CPU TDP 70-205W*
Cores
  • Up to 28 Cores
Note * Certain high frequency optimized CPU are not supported, such as Intel Gold 6250 and 6256. Please contact Supermicro Technical Support for additional information.
Note BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
 
System Memory
Memory Capacity
  • 6 DIMM slots
  • Up to 1.5TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.
 
On-Board Devices
Chipset
  • Intel® C622 chipset
SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Controllers
  • Dual 10GBase-T LAN with Intel® X722 + X557
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
  • ASPEED AST2500 BMC
 
Input / Output
SATA
  • 10 SATA3 (6Gbps) ports
LAN
  • 2 RJ45 10GBase-T LAN ports
  • 1 RJ45 dedicated IPMI LAN port
USB
  • 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A)
  • 7 USB 2.0 ports (2 rear + 5 headers)
Video
  • 1 VGA port
Serial Port / Header
  • 2 COM ports (1 rear, 1 header)
SuperDOM
  • 2 SuperDOM (Disk on Module) ports with built-in power
 
System BIOS
BIOS Type
  • AMI 32Mb SPI Flash ROM
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions and Weight
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 25.6" (650mm)
Package
  • 23.5" (W) x 8.5" (H) x 33.7" (L)
Weight
  • Gross Weight: 48 lbs (21.77 kg)
  • Net Weight: 24 lbs (10.89 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • Network activity LEDs
  • System Information LED
  • Information LED (temp., status)
 
Expansion Slots
PCI-Express
  • 2 PCI-E 3.0 x16 (FHFL) slots
  • 1 PCI-E 3.0 x8 (LP) slot
M.2
  • 1x M.2 Interface: PCI-E 3.0 x4 and SATA
  • Form Factor: 2280, 22110
  • Key: M-Key
  • Double Height Connector
 
Drive Bays
Hot-swap
  • 4 Hot-swap 3.5" SATA3 drive bays
 
System Cooling
Fans
  • 5 Counter-rotation 40x56mm PWM fans
  • 1 fan for AOC cooling (option)
 
Power Supply
500W Redundant Power Supplies with PMBus
Total Output Power
  • 500W: 100 – 240Vac
Dimension
(W x H x L)
  • 54.5 x 40.25 x 320 mm
Input
  • 100-240Vac, 50-60Hz, 6.1-2.6A
+12V
  • Max: 42A / Min: 0.5A
+5Vsb
  • Max: 4A / Min: 0A
Output Type
  • Gold Finger Connector Mating with Molex 45984-4343
With Power Distributor
  • +5V: 25A
  • +3.3V: 12A
  • -12V: 0.6A
Certification Platinum Level Certified   Platinum Certified
  [ Test Report ]
 
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)

See Parts List

Parts List - (Items Included)
 
Part Number
Qty
Description
Motherboard / Chassis MBD-X11SPW-TF
CSE-815TQC-R504WB2
1
1
Super X11SPW-TF Motherboard
1U Chassis
Backplane BPN-SAS3-815TQ 1 1U 4-Port 12Gbps Backplane Support 4x3.5
Cable 1 CBL-0180L-01 1 SATA,INT,ROUND,SET OF 4,ST-RA 70/59/48/38CM,26AWG
Cable 2 CBL-0296L 1 4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG
Cable 3 CBL-CDAT-0660 1 CBL,SGPIO,2X4F TO 2X4F,P2.54,ROUND CABLE,27CM,28AWG
FAN 1 FAN-0156L4 2 40x40x56 mm 13K-11K RPM Counter-rotating Fan,RoHS/REACH
Manual MNL-1921-QRG 1 5019P-WT/WTR, QRG,HF,RoHS/REACH
Riser Card RSC-R1UW-2E16 1 1U LHS WIO Riser card with two PCI-E x16 slots
Riser Card RSC-R1UW-E8R 1 1U RHS WIO Riser card with one PCI-E x8 slot
Heatsink / Retention SNK-P0067PS 1 1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism
* Power Supply PWS-504P-1R 2 500W 1U Redundant PWS W/ 54.5MM Wide
* Power Distributor PDB-PT112-S2424 1 WIO X11 Support,PDB-PT112-S2424 is based on PDB-PT112-2424
* Cable 4 CBL-0335L 1 CBL,FRONT CNTL,20 TO 20 PIN,RA,RND TUBE,73CM,28AWG
* Cable 5 CBL-PWCD-0160-IS 2 PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,13A,125V,RoHS/REACH
* Fan Holder CSE-PT0135 1 FAN HOLDER FOR SIX 40X56MM COUNTER ROTATING FANS
* Peripheral Drive 1 CSE-PT93L-B 1 Black DVD dummy cover for SC813, 813M, 815, PBF-RoHS
* FAN 2 FAN-0156L4 3 40x40x56 mm 13K-11K RPM Counter-rotating Fan,RoHS/REACH
* Front Panel FPB-FP815U 1 815 UIO front control board (U)
* Parts MCP-120-00030-0N 1 Blank LP L-bracket (1 raw of capsule hole)
* Parts MCP-120-00053-0N 2 Blank FH L bracket w/o SCSI cutout for SC825,836,846,743
* Drive Tray(s) MCP-220-00075-0B 4 Black gen 5.5 hot-swap 3.5"; HDD tray
* Rear Window MCP-240-00098-0N 1 WIO rear window for SC113,SC116, SC815 Redundant PWS
* Power Supply MCP-250-81502-0N 1 SC815 Redundant Power Distributor Cover
* Rail Set MCP-290-00054-0N 1set Rail set, quick/quick, optional for 1U 17.2
* Fan Holder MCP-340-00035-0B 3 Dummy fan 40x56mm for 40x56 counter-rotating fan (cost-effective)
Notes:
  1. Parts with * are inside the chassis
  2. Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
Optional Parts List
 
Part Number
Qty
Description
GPU Optional Parts FAN-0141L4
MCP-310-81504-0B
2
1
40x40x56mm 20.5K RPM, Counter-rotation fan
Air shroud for Tesla T4 GPU
3.5" to 2.5" Converter Tray MCP-220-00043-0N - Black Hot-swap Gen-4 2.5" to 3.5" HDD tray
DVD-ROM / DVD-RW DVM-TEAC-DVD-SBT5
DVM-PLDS-DVDRW-SBT5
1
1
TEAC slim DVD-ROM SATA drive
PHILPS slim DVD-RW SATA drive
DVD-ROM Accessory MCP-220-81502-0N 1 Slim SATA DVD mounting kit
Internal 2.5" HDD Tray (FDD slot) MCP-220-83601-0B 1 Black FDD dummy tray support 1x 2.5" slim HDD
Internal 2.5" HDD Tray (DVD slot) MCP-290-00036-0B 1 Black DVD dummy tray support 1x 2.5" slim HDD
Cable for internal HDD CBL-0484L
CBl-0289L
2
1
55cm 30AWG SATA straight to straigh cable
Y split, big 4 pin to two RA SATA power estenstion 30cm
Hot-swap 2.5" kit (FDD slot) MCP-220-81504-0N 1 Single slim 2.5" SAS3 (12Gb/s) hot swap in slim FDD form factor
Hot-swap 2.5" kit (DVD slot) MCP-220-81506-0N 1 Single slim 2.5" SAS3 (12Gb/s) hot swap in slim DVD form factor
USB/COM port tray (FDD slot) MCP-220-00129-0B 1 Black 2x USB3.0/COM port tray in slim FDD form factor
Cooling Fan FAN-0156L4 - 40x40x56mm 13K-11K RPM Counter-rotating Fan
Storage Controller card & cable AOC-S3108L-H8iR
& 1x CBL-SAST-0699
AOC-S3108L-H8iR-16DD
& 1x CBL-SAST-0699
AOC-S3008L-L8i
& 1x CBL-SAST-0699
AOC-S3008L-L8e
& 1x CBL-SAST-0699
- Standard LP, 8 Internal ports (12Gb/s) PCI-E 3.0 x8,
RAID controller, RAID 0, 1, 5, 6, 10, 50, 60
Standard LP, 8 Internal ports (12Gb/s) PCI-E 3.0 x8,
16HDD RAID controller, RAID 0, 1, 5, 6, 10, 50, 60
Standard LP, 8 internal ports (12Gb/s) PCI-E 3.0 x8,
63HDD, RAID 0, 1, 10
Standard LP, 8 internal ports (12Gb/s) PCI-E 3.0 x8,
122HDD HBA
CacheVault BTR-CV3108-1U1
BTR-TFM8G-LSICVM02 &
BKT-BBU-BRACKET-05
-
-
CacheVault for Broadcom 3108 with SuperCap mounting in 1Y 40x56 fan tray
CacheVault for Broadcom 3108 with SuperCap mounting bracket for PCI-E location
Network Card(s) AOC-SGP-i2
AOC-SGP-i4
AOC-STGN-i2S
AOC-STGF-i2S
AOC-STG-B4S
AOC-STGS-i2T
AOC-S25G-b2S
AOC-S25G-m2S
-
-
-
-
-
-
-
-
Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350-AM2
Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350
Standard Lp, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES
Standard Lp, 2x 10GbE SFP+, PCI-E x8, Intel X710-BM2
Standard Lp, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
Standard Lp, 2x 10GbE RJ45, PCI-E x8, Intel X550-AT2
Standard LP, 2x 25GbE SFP28, PCI-E x8, Broadcom BCM57414
Standard LP, 2x 25GbE SFP28, PCI-E x8, Mellanox CX-4 LX
Front Bezels CSE-PTFB-813LB
CSE-PTFB-813-02B
-
-
Black front bezels
Black Front Bezel w/ Round Venting Holes
TPM security module AOM-TPM-9670V
AOM-TPM-9671V
1
1
TPM 2.0, vertical form factor
TPM 1.2, vertical form factor
Global Services & Support OS4HR3/2/1
OSNBD3/2/1
-
-
3/2/1-year onsite 24x7x4 service
3/2/1-year onsite NBD service
Software SFT-OOB-LIC 1 OOB Management Package (per node license)
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)
Hide Parts List

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Certain products may not be available in your region