|
|
|
| |
| SSG-2028R-NR48N |
- SuperStorage 2028R-NR48N (Black)
|
|
|
CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
|
|
Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
|
Chipset |
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- SIOM support for flexible networking options
|
Video |
|
|
|
LAN |
- LAN ports via
SIOM
Add-On-Card
|
USB |
- 3 USB 3.0 ports (2 rear + 1 Type A)
|
Video |
|
Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Width |
|
Height |
|
Depth |
- 30.2" (767mm)
- With Cable Management Arm Installed:
35.2" (895mm)
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Information LED
- Power fail LED
|
|
|
PCI-Express |
- 2 PCI-E 3.0 x16 slots
- 1 PCI-E 3.0 x8 slots
- Slot 3 Occupied by NVMe AOC
|
| |
| Hot-swap |
- 48 Hot-swap 2.5" NVMe drive bays
- 2 rear Hot-swap 2.5" SATA drive bays
|
| |
| Two 24 port NVMe backplanes, each supporting up to 24x 2.5" NVMe SSDs |
| |
| Fans |
- 5 hot-swap 8cm redundant PWM cooling fans
|
| |
1600W Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension (W x H x L) |
|
Input |
- 100-127Vac / 13 - 9A / 50-60Hz
- 200-240Vac / 10 - 8A / 50-60Hz
|
+12V |
- Max: 83.3A / Min: 0A (100-127Vac)
- Max: 133A / Min: 0A (200-240Vac)
|
12Vsb |
|
Output Type |
- 25 Pairs Gold Finger Connector
|
Certification |
Titanium Level [ Test Report ]
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
| RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X10DSC+
CSE-226STS-R1K62P2 |
1 1 |
Super X10DSC+ Motherboard
2U Chassis |
Add-on Card / Module |
AOC-SLG3-4E4T-O |
1 |
4 Port NVMe PCIE X16 Retimer |
Backplane |
BPN-NVME3-216EB |
2 |
BPN-NVMe3-216A-S4 Backplane Base Board |
Backplane |
BPN-NVME3-216EL |
4 |
PCIe Gen3x16 input to PLX9765 to support 12x NVMe port |
Cable 1 |
CBL-SAST-0818 |
2 |
OCuLink v. 1.0,INT,PCIe NVMe SSD, 55CM,34AWG |
Cable 2 |
CBL-SAST-0974-1 |
2 |
OcuLink v 1.0,INT,PCIe NVMe SSD, 37CM,34AWG |
Cable 3 |
CBL-SAST-0848 |
2 |
OcuLink v 1.0,INT,PCIe NVMe SSD, 95CM,34AWG |
Cable 4 |
CBL-SAST-0847 |
2 |
OcuLink v 1.0,INT,PCIe NVMe SSD, 76CM,34AWG |
Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
Parts |
MCP-110-00015-0N |
16 |
Pan head screw, #6-32 x 6L |
Heatsink / Retention |
SNK-P0047PS |
2 |
1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB |
Parts |
MCP-220-82616-0N |
1 |
12G 2.5x2 Drive Kit w/ Status LED(216B/826B/417B/846X/847B) |
Power Supply |
PWS-1K62A-1R |
2 |
AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH |
Drive Tray(s) |
MCP-220-00127-0B |
48 |
Black gen-3 2.5 NVMe drive tray, Orange tab with lock (for hotswap NVMe drive),HF,RoHS/REACH |
|
|
|
|
|