 | |
 | | SSG-6048R-E1CR24N |
- SuperStorage 6048R-E1CR24N (Black)
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SAS |
- SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID 0,1,5,6,10,50,60
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® X540 Quad Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| LAN |
- 4 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 3 USB 3.0 ports (2 rear + 1 Type A)
- 2 USB 2.0 ports (2 rear)
|
| VGA |
|
| Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Width |
|
| Height |
|
| Depth |
|
| Weight |
- Gross Weight: lbs ( kg)
- Net Weight: lbs ( kg)
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Information LED
- Power fail LED
|
| |
|
| PCI-Express |
- 2 PCI-E 3.0 x16 slots
- 3 PCI-E 3.0 x8 slots
- 1 PCI-E 2.0 x4 (in x8) slot
- Slot 3 & 4 occupied by controller and JBOD Expansion Port
|
| | |
| | Hot-swap |
- 24x 3.5" Hot-swap SAS3/SATA3 drive bays
|
| Optional |
- 2x 2.5" Hot-swap SATA drive bays (rear)
|
| | |
| | SAS3/SATA3 single expander per backplane |
| | |
| | Fans |
- 2x 80mm hot-swap rear exhaust cooling fans
- Redundant cooling
|
| | |
| 920W Redundant High-Efficiency Power Supplies w/ Power Distributor, PMBus 1.2, I2C, and PFC |
| AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC Output |
- +5V standby: 4A
- +12V: 75A
|
| With Power Distributor |
- +5V: 45A
- +3.3V: 24A
- -12V: 0.6A
|
| Certification |
Platinum Certified
[ Test Report ]
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
