|
HW SAS3 Controller Storage Expandable
|
|
| Integrated Board |
|
|
|
|
|
Key Features
1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4†/
v3 family; QPI up to 9.6GT/s
2.
Up to 2TB† ECC 3DS LRDIMM
, up to
DDR4-
2400†MHz
; 16x DIMM slots
3. 1 PCI-E 3.0 x16, 6 PCI-E 3.0 x8
(slot 1 & 2 occupied by controller
and JBOD expansion port)
4. Dual 10GBase-T LAN w/ Intel® X540
5. 36x 3.5" Hot-swap drive bays
(24 front + 12 rear):
32x 3.5" Hot-swap SAS3/SATA3 drive
bays and 4x NVMe hybrid drive bays
(SAS3/SATA3/NVMe*); 2x 2.5" optional
Hot-swap SATA drive bays (rear);
4x 2.5" internal fixed drive bays
6. SAS3 via Broadcom 3108 AOC (HW RAID)
7. Server remote management: IPMI 2.0
/ KVM over LAN / Media over LAN
8. 7x 80mm middle cooling fans
9. 1280W Redundant Power Supplies
Platinum Level (94%)
|
|
|
|
|
|
|
|
| |
| SSG-6048R-E1CR36H |
- SuperStorage 6048R-E1CR36H (Black)
|
|
|
CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
|
|
Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 512 ECC RDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
|
Chipset |
|
SAS |
- SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID 0,1,5,6,10,50,60
|
SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Intel® X540 Dual Port 10GbE
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
|
|
LAN |
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 2 USB 3.0 ports (rear)
- 2 USB 2.0 ports (rear)
- 1 Type A
|
VGA |
|
Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Width |
|
Height |
|
Depth |
|
Weight |
- Gross Weight: 102.5 lbs (46.4 kg)
- Net Weight: 65.5 lbs (29.7 kg)
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Information LED
- Power fail LED
|
|
|
PCI-Express |
- 1 PCI-E 3.0 x16 slot
- 6 PCI-E 3.0 x8 slots
- Slot 1 & 2 occupied by controller and JBOD Expansion Port
|
| |
| Hot-swap |
- 36x 3.5" Hot-swap SAS3/SATA3 drive bays
- Double-sided: 24 front + 12 rear drive bays
|
Optional |
- 2x 2.5" Hot-swap SATA drive bays (rear)
- Fixed internal Drive Bracket supports 1x 3.5 or 2x 2.5" devices
|
| |
| SAS3/SATA3 single expander per backplane |
| |
| Fans |
- 7x 80mm middle cooling fans
- Redundant cooling
|
| |
1280W High-Efficiency (95%+) power supply |
AC Input |
- 1000W Output @ 100-140V, 12-8A, 50-60Hz
- 1280W Output @ 180-240V, 8-6A, 50-60Hz
|
DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
|
Certification |
Platinum Certified [ Test Report ]
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
| RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X10DRH-iT
CSE-847BE1C-R1K28LPB |
1 1 |
Super X10DRH-iT Motherboard
4U Chassis |
Backplane |
BPN-SAS3-846EL1 |
1 |
24-port 4U SAS3 12Gbps single-expander backplane, support up to 24x 3.5-inch SAS3/SATA3 HDD/SSD |
Backplane |
BPN-SAS3-826EL1-N4 |
1 |
12-port 2U SAS3 12Gbps single-expander backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD/SSD and 4x NVMe/SAS3/SATA3 storage devices |
Cable 1 |
CBL-SAST-0532 |
2 |
MINI SAS HD,12G,INT,50CM,30AWG |
Cable 2 |
CBL-0296L |
3 |
4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG |
Cable 3 |
CBL-SAST-0531-01 |
4 |
MINI SAS HD,12G,INT,80CM,30AWG |
Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
Parts |
MCP-260-00042-0N |
1 |
STD I/O shield for X9 socket R server MB with Gasket. |
Heatsink / Retention |
SNK-P0048PS |
2 |
2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB |
Power Supply |
PWS-1K28P-SQ |
2 |
1280W, redundant single output power supply |
Add On Card |
AOC-S3108L-H8IR-O-P |
1 |
SAS-3, GEN-3 RAID card. Supports 12Gb and RAID 0, 1, 5, 6, 10, 50, and 60. Includes 2GB memory |
Add On Module |
AOM-SAS3-8I8E-LP |
1 |
8-port Mini SAS HD Int-to-Ext cable adapter w/ LP bracket |
|
|
|
| |
| |
Part Number |
Qty |
Description |
3108 Cache Protection |
BTR-TFM8G-LSICVM02 BKT-BBU-BRACKET-05 |
1 1 |
SuperCap Module Mounting PCIe Card |
Drive Tray |
MCP-220-84701-0N CBL-0179L CBL-0082L |
1 2 1 |
Internal drive tray for one 3.5" HDD or two 2.5" HDD SATA cable 70cm Y split SATA power extension |
Drive Kit |
MCP-220-82616-0N |
- |
12G 2.5" x2 Drive Kit w/ Status LED |
4 NVMe Drives Support |
AOC-SLG3-2E4R CBL-SAST-0590 MCP-220-00116-0B |
2 4 4 |
NVMe AOC Internal Mini-SAS HD cable for PCIe SSD NVMe, 12Gb/s, 70cm 3.5" to 2.5" NVMe drive tray |
3.5" to 2.5" Tray Converter |
MCP-220-00043-0N |
1 |
Single 3.5" to 2.5" hot-swap tray converter |
Global Services & Support |
OS4HR3/2/1 OSNBD3/2/1 |
- - |
3/2/1-year onsite 24x7x4 service 3/2/1-year onsite NBD service |
Software |
SFT-OOB-LIC • |
1 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|
Note: * NVMe support requires additional parts in optional parts list |
|
|