Question I have a X10DRi motherboard, I am attempting to use an Intel 750 PCIe SSD add on card, however this NVMe drive never appears in the boot menu. Is it possible to add NVMe support to this new motherboard? Answer PCI-E NVMe SSDs are only supported in UEFI mode Bios. Please refer to the following instructions on how to install the OS and boot into it: 1. Go into the bios to the section PCIe/PCI/PnP Configuration and change the Device Option Rom Configure “UEFI mode” from Legacy on Riser card slot or PCIe slot. 2. Save and exit the bios. 3. During the post press F11 and select “UEFI: DVD-ROMxxxxxxxx” to start the installation. Some OS versions include built in drivers. 4. Reboot after OS installation, press F11 again and select “Windows Boot Manager” to load the OS. Its best to change the boot sequence in the BIOS if it is not in first boot device select "Windows Boot Manager" as first boot device in the BIOS. Was this FAQ helpful? YES      NO Enter Comments Below: Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com.  Enter your email address below if you'd like technical support staff to reply:  Please type the Captcha (no space) H F L X FAQ Stats FAQ ID Related Category / Keyword Date Posted Code 21987 BIOS: - BIOS Setting 11/13/15     Print Answer