 |
 |
| SBI-7126TG
|
- GPU SuperBlade SBI-7126TG
(Black)
|
| |
|
Super B8DTG
|
| |
|
| CPU
|
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit
Xeon® processor(s) of the same type
below:
- Intel®
Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 95W
- Intel®
Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
| GPU
|
- Supports up to two NVIDIA Tesla M2050 and M2070
GPUs based on the CUDA Fermi architecture.
- Each GPU provides 448 CUDA cores and up to 6GB
of GDDR5 memory.
|
| |
|
| Memory
Capacity |
- 6x 240-pin DIMM slots
- Supports up to 96 GB 1333 / 1066 / 800MHz DDR3
ECC Registered memory
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3
ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory
Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC
Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM
Sizes |
- 1GB, 2GB, 4GB
, 8GB
, 16GB
|
| Memory
Voltage |
|
| Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device
Data Correction (SDDC)
|
| |
|
| Chipset
|
- Intel® 5520 (Tylersburg) chipset
- ICH10 + IOH-36D
|
| InfiniBand
Support |
- 4x QDR/DDR (40/20Gb/s) InfiniBand mezzanine HCA (Optional)
|
| IPMI
|
- Support for Intelligent Platform Management
Interface (IPMI) v.2.0 via Chassis Management Module
(CMM)
|
| Network
Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet
- Intel® I/OAT 3 support for
fast, scaleable, and reliable networking
- VMDq support for better
performance of virtualization
|
| Super
I/O |
|
| Clock
Generator |
|
| |
|
| BIOS
Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
|
|
| Height
|
|
| Width
|
|
| Depth
|
|
| Weight
|
|
| Available
Colors |
|
| |
|
| Buttons
|
- Power On/Off button
- KVM button
|
| LEDs
|
- Power LED
- UID / KVM LED
- Network Activity LED
- Fault LED
|
| Connector |
- SUV (Serial/USB/Video) & KVM Connector
|
| |
|
| PCI-Express |
- 2 (x16) PCI-E 2.0 (FH/HL)
- (Optional) supports up to 2x Fermi 2070/2050
GPUs (not included)
|
| |
|
| Hot-swap |
|
| |
|
| KVM
|
- 1 Front Connector for Supermicro KVM Card
|
| |
| Environmental
Spec. |
- Operating Temperature: 10°to 35°C
(50°to 95°F)
- Non-operating Temperature: -40°to 70°C
(-40°to 158°F)
- Operating Relative Humidity: 8% to 90%
(non-condensing)
- Non-operating Relative Humidity: 5 to 95%
(non-condensing)
|
| |
| United States
/ Canada |
- FCC- Emissions (US) Verification
|
| Europe
|
- EN55022 - Emissions
- EN55024 - Immunity
- EN61000-3-2 - Harmonics
- EN61000-3-3 - Voltage Flicker
- CE - EMC Directive 89/336/EEC
|
| |
| United States
/ Canada |
- UL60950-1 - CSA/CUL 60950-1
|
| Europe
|
- EN60950-1, CE - Low Voltage Directive 73/23/EEE
|
| Germany
|
|
|
