 | |
 | | MBD-K1SPE -B | - K1SPE (for server SKUs only)
| | | |
| | Form Factor | ATX | | Dimensions | 12" x 10", (30.5cm x 25.4cm) | | | | | Host Processor | - Intel® Xeon® Phi™ x200 Processor,
CPU TDP support up to 260W - Socket P (LGA 3647)
| | Cores | - Up to 72 Cores
- 16GB MCDRAM on package
| | | | | Memory Capacity | - 6x 288-pin DDR4 DIMM slots
- Up to 192GB ECC RDIMM
| | Memory Type | - 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit (RDIMM)
| | DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | SATA | - SATA3 (6Gbps) via C612 controller
- RAID 0, 1, 5, 10 support
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
| | Graphics | | | | | | SATA | | | LAN | - 2 RJ45 Gigabit Ethernet LAN ports
- 1 Dedicated IPMI LAN port
| | USB | - 5 USB 3.0 ports (4 rear + 1 via header)
- 1 USB 2.0 port (1 via header)
| | Display | | | COM Port/Header | | | SuperDOM | - 2 SuperDOM (Disk on Module) ports with built-in power
| | | | |
| | Model(s) | |
| | |
| | PCI-Express | - 2 PCI-E 3.0 x16 slots
- 1 PCI-E 3.0 x4 slot
| | | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.7.1
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
| | | | | Software | | | Power Configurations | - ACPI Power Management
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
| | | | | Voltage | - +12V, +3.3V, +5V, +5V standby, 3.3V standby, Supports system management utility, System level control, VBAT
| | FAN | - Total of 2 fan headers supporting 2 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend static indicator LED
| | Other Features | - Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Node Manager Support
| |
