 |
|
 |
| AS-1022TC-TF |
- A+ Server 1022TC-TF (Black)
|
| |
|
| CPU |
- Dual 1207-pin Socket C32
- Supports two 6/4-Core ready AMD Opteron™ 4100 Series processors
- HT3.0 Link support
|
| Chipset |
- AMD SR5670 + SP5100 Chipset
|
| |
|
|
| Memory Capacity |
- Twelve DIMM sockets
- Support up to 128GB U/RDDR3 ECC 1333/1066 MHz memory
- Dual channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
| Memory Type |
- DDR3 1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| |
|
|
| SATA |
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA |
|
| Super I/O |
|
| |
|
| SATA |
|
| LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB |
- 4x USB 2.0 ports
- 2x Rear, 1x header (2 ports)
|
| VGA |
|
| Serial Ports |
- 1x Fast UART 16550 serial port
|
| |
|
| PCI-E |
- 1 Low Profile PCI-E Gen2.0 x16 expansion slot
|
| |
|
|
| BIOS Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| Ports |
|
| |
|
|
| Hot-swap |
- 4x 3.5" SATA hard drive bays
- Enterprise SATA HDD only recommended
|
|
|
|
| Fans |
- 6x counter-rotating PWM fans w/ Optimal Fan Speed Control
|
| |
|
|
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
| With Power Distributor |
- +5V: 45 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| Certification |
  80PLUS
Platinum Certified
[ Test Report ]
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU 4-phase Switching Voltage Regulator
|
| FAN |
- Total up to five 4-pin fan headers
- 6 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
|
| LED |
- CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Header
- Chassis Intrusion Detection
- Chipkill Support
|
|
