A+ Server 2022TG-HLIBQRF

  A+ Products  Systems   2U   [ 2022TG-HLIBQRF ]

Supermicro's AMD Server AS-2022TG-HLIBQRF







Integrated Board
Supermicro's AMD Motherboard H8DGT-HLIBQF
H8DGT-HLIBQF


Key Features (per node)

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual AMD Opteron™ 6000 series

    processors (Socket G34)

    16/12/8/4-Core ready; HT3.0 Link

    support
2. Up to 256GB DDR3 1866MHz ECC

    Registered DIMM; 8x DIMM sockets
3. 1x Low-profile PCI-E 2.0 in x16 slots

    (For add-on card up to 6.6" in length)
4. Dual-port GbE LAN Controller, 5x

    USB 2.0 ports, 1x dedicated LAN for

    system management (IPMI 2.0)
5. 3x Hot-swap SATA Drive Bays

    (RAID 0, 1)
6. 1620W High-Efficiency Platinum Level

    Redundant Power Supplies (94%

    Efficiency)
7. Mellanox ConnectX-2 QDR Infiniband

    40Gbps Controller w/ QSFP connector


Available Colors: Black    


 BIOS
 IPMI
 


Product SKUs
AS-2022TG-HLIBQRF
  • A+ Server 2022TG-HLIBQRF (Black)
 
Motherboard
Super H8DGT-HLIBQF
 
Processor/Chipset
CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • AMD chipset SR5690 + SP5100
Note
  • Supports 6000 processors with Max ACP 80W (TDP 115W)
 
System Memory (per node)
Memory Capacity
  • 8 DIMM sockets
  • Support up to 256GB Registered ECC 1866/1600/1333/1066 SDRAM in 8 DIMMs
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1866/1600/1333/1066 MHz

    Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices (per node)
SATA
  • AMD SP5100 (RAID 0, 1)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Infiniband
  • Mellanox Connect-X-2 QDR IB w/ single QSFP connector
Network Controllers
  • Intel® 82576 controller, Dual-Port

      Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond® W83527 chip
 
Expansion Slots (per node)
PCI-E
  • 1x PCI-E 2.0 x16
 
Input / Output (per node)
SATA
  • 3x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 5x USB 2.0 ports
  • 2x Rear, 2x header, and 1x Type A
VGA
  • 1x VGA port
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
 
System BIOS (per node)
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • 2U Twin2 Rackmount
Model
  • SC827H-R1620B
 
Dimensions (stand-alone chassis / package)
Height
  • 3.47" (88mm) / 11.22" (285mm)
Width
  • 17.25" (438mm) / 26.38" (670mm)
Depth
  • 28.5" (724mm) / 39.76" (1010mm)
Gross Weight
  • 85 lbs / 38.6 kg
Available Colors
  • Black
 
Front Panel
Buttons
  • 4x Power On/Off button
  • 4x UID button
LEDs
  • 4x Power status LED
  • 4x UID LED
  • 4x Network activity LEDs
  • 4x System overheat / fan failed /

     power failed LED
 
Drive Bays
HDD Bay
  • 12x Hot-swap 3.5" SATA HDD

    (3 for each node)
  • Enterprise SATA HDD only recommended
 
System Cooling
Fans
  • 4x 80mm PWM cooling fans
 
Power Supply
1620W high-efficiency redundant power supply w/ PMBus
AC Input
  • 1000W Output @ 100-120V, 12-10A, 50-60Hz
  • 1200W Output @ 120-140V, 12-10A, 50-60Hz
  • 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
DC Output
  • 1000W: +12V/84A; +5Vsb/4A
  • 1200W: +12V/100A; +5Vsb/4A
  • 1620W: +12V/150A; +5Vsb/4A
Certification Platinum Level Certified94%+    Platinum Certified

  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 4-fan status tachometer monitoring
  • Up to four 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control

     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8DGT-HLIBQF 4 Super H8DGT-HLIBQF Motherboard
Chassis CSE-827H-R1400B 1 2U Chassis
Air Shroud MCP-310-82713-0B 4 Plastic air shroud for H8DGT-HL
Backplane BPN-ADP-4SATA 4 4 port Adapter card for BPN-SAS-827B
Heatsink / Retention SNK-P0037P 8 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
Riser Card RSC-R1U-E16R 4 RSC-R1U-E16R


Optional Parts List
  Part Number Qty Description
Adaptor HDD carrier MCP-220-00043-0N - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.