| |
| SYS-6048R-TXR |
- SuperServer 6048R-TXR (Black)
|
|
|
CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
|
|
Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 512 ECC RDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
|
Chipset |
|
SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
|
|
Serial ATA |
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A)
- 4x USB 2.0 ports (2 rear, 2 via headers)
|
Video |
|
Serial Port / Header |
- 2x COM ports (1 rear, 1 Header)
|
DOM |
- 2x SuperDOM (Disk on Module) ports
|
TPM |
|
|
|
PCI-Express |
- 10x PCI-E 3.0 x8 slots
- 1x PCI-E 2.0 x4 (in x8) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS rescue hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
|
| |
| Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit
|
Model |
|
| |
| Width |
|
Height |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System information (overheat/UID) LED
- Power Fail LED
|
Ports |
- 2x USB 2.0 ports
- 1x COM port
|
| |
| Hot-swap |
- 5x 3.5" Hot-swap Drive Trays
|
90° Rotatable |
- 3x 5.25" Peripheral Drive Trays
|
| |
| DVD-ROM |
- 1x slim DVD-ROM drive (optional)
|
|
| SAS / SATA Hard Drive Backplane w/AMI MG9072 |
| |
| Fans |
- 1x 92x38mm 4-pin PWM front intake fan
- 2x 80x38mm 4-pin PWM rear exhaust fans
|
| |
| 600W Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension (W x H x L) |
|
Input |
- 100-240V, 50-60Hz, 7.5-3.5A
|
+12V |
|
+5Vsb |
|
Output Type |
- Gold Finger Connector Mating with Molex 45984-4343
|
Certification |
Platinum Certified [ Test Report ]
|
|
|
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
FAN |
- Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
| RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|