|
|
|
Key Features 4 Hot-plug System Nodes in 4U Each node supports:
1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4†/
v3 family; QPI up to 9.6GT/s
2.
Up to 2TB† ECC 3DS LRDIMM
, up to
DDR4-
2400†MHz
; 16x DIMM slots
3. Expansion slots: 1 PCI-E 3.0 x16 (LP)
1 PCI-E 3.0 x8 (Micro Low Profile)
See Cable Configuration Map
4. I/O ports: 2 GbE ports, 1 video,
2 USB 3.0 ports
5. Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with
dedicated LAN port
6. 8x 3.5" Hot-swap SAS/SATA via Broadcom
3008 or 6x 3.5" Hot-swap SAS/SATA
+ 2x optional NVMe
7. 2x 80mm 11k RPM middle fans
8. 1280W Redundant Power Supplies
Platinum Level (95%)
|
|
|
|
|
|
|
|
| |
| SYS-F628R3-RC0B+ |
- SuperServer F628R3-RC0B+ (Black)
|
|
|
CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
|
|
Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
|
Chipset |
|
SAS |
- SAS 3.0 (12Gbps) via Broadcom 3008
- HBA/SW RAID 0, 1, 10 support
|
SATA |
- SATA 3.0 (6Gbps) w/ RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Intel® i350-AM2 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
|
|
SAS |
|
LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
|
VGA |
|
|
|
Software |
|
Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Width |
|
Height |
|
Depth |
|
Package |
- 28.3" (W) x 15.0" (H) x 42.4" (D)
|
Weight |
- Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- UID button
|
LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- Information LED (UID, Fan failure, Overheat)
|
|
|
PCI-Express |
|
| |
| Hot-swap |
- (6+2) 3.5" Hot-swap SAS3 HDD trays
- 8 SAS3 or 6 SAS3 + 2 NVMe (optional)
Note: NVMe support requires 2 CPUs installed
|
| |
|
- 1 SAS/SATA backplane
- 1 SAS/SATA/NVMe hybrid (2 slots)
|
| |
| Fans |
- 2x 8cm 11k RPM middle fans
|
| |
| 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
AC Input |
- 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
|
DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
|
Certification |
Platinum Certified [ Test Report ]
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
| RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X10DRFR-N
CSE-F424AS-R1K28BP |
4 1 |
Super X10DRFR-N Motherboard
4U Chassis |
Backplane |
BPN-ADP-8S3008-1UF |
4 |
BPN-ADP-8S3008-1UF |
Backplane |
BPN-ADP-F418LS |
4 |
Power Distribution Board for X10DRFR,RoHS/REACH,PBF |
Backplane |
BPN-SAS3-F424-A2N2 |
4 |
2x-port Fat Twin SAS3 12Gbps hybrid backplane, support up to 2x 3.5-inch SAS3/SATA3/NVMe storage devices |
Backplane |
BPN-SAS3-F424-A6 |
4 |
6-port Fat Twin SAS3 12Gbps backplane, support up to 6x 3.5-inch SAS3/SATA3 HDD/SSD |
Cable 1 |
CBL-SAST-0550 |
4 |
MINI SAS HD,12G,INT,25CM,30AWG |
Cable 2 |
CBL-SAST-0691 |
4 |
MINI SAS HD RA- 2x MINI SAS HD,INT,15/59CM,28AWG |
Cable 3 |
CBL-0480L |
4 |
4 pins to 4 pins 40cm PDB to MB power cable HF. 18AWG |
Cable 4 |
CBL-OTHR-0022L |
4 |
20 to 20 pin cable for BPN-ADP-F418LS,7.5cm, 28AWG,RoHS/REACH,PBF |
Cable 5 |
CBL-0486L |
8 |
2x2 to 2x2 15cm power cable HF. 18AWG |
Cable 6 |
CBL-PWCD-0900 |
4 |
PWCD,US/EU/Canada/China/Australia,IEC60320 C14 TO C13,4FT,17AWG |
Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
Manual |
MNL-1763-QRG |
1 |
Quick Reference Guide for F628R3-RC0B+/RC0BPT+ |
Heatsink / Retention |
SNK-P0048P |
4 |
2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Square ILM MB |
Heatsink / Retention |
SNK-P0048PS |
4 |
2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB |
Power Supply |
PWS-1K28P-SQ |
4 |
1U 1280W, redundant single output power supply |
|
|
|
| |
| |
Part Number |
Qty |
Description |
Software |
SFT-OOB-LIC • |
4 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
4 |
DataCenter Management Package (per node license) |
NVMe Kit:
Mounting Bracket
Power adapter Board
Drive Carrier
NVMe Cable |
MCP-120-42405-0N
BPN-ADP-2UPWR-O-P
MCP-220-93801-0B
CBL-SAST-0623 |
1/node
1/node
2/node
2/node |
2nd power adapter mounting bracket *
Power adapter board *
Drive carrier 3.5" to 2.5" with adapter tray
45cm NVMe cable |
* Required for certain configurations. Please contact Supermicro for additional details. |
Hide Parts List
|
|
|
|
|
|