SuperServer F628R3-RTBPTN+

  Products  Systems   FatTwin™   [ F628R3-RTBPTN+ ]




Integrated Board
Super X10DRFR-NT


Views: | Angled (node) | Top (node) |
| Angled Front (system) | Rear (system) |

 Key Features
4 Hot-plug System Nodes in 4U
Each node supports:

1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 2TB† ECC 3DS LRDIMM , up to
    DDR4- 2400†MHz ; 16x DIMM slots
3. Expansion slots: 1 PCI-E 3.0 x16 (LP)
    1 PCI-E 3.0 x8 (Micro Low Profile)
    See Cable Configuration Map
4. I/O ports: 2 10GBase-T, 1 video,
    2 USB 3.0 ports
5. Built-in Server management tool
    (IPMI 2.0, KVM/media over LAN) with
    dedicated LAN port
6. 8x 3.5" Hot-swap SATA3 OR
    6x 3.5" Hot-swap SATA3 +
    2x SATA/NVMe hybrid
7. 2x Internal NVMe ports (4x PCI-E 3.0)
8. 2x 80mm 11k RPM middle fans
9. 1280W Redundant Power Supplies
    Platinum Level (95%)


 Drivers & Utilities   BIOS   IPMI   Tested Memory  Tested M.2 List   NVMe Options   Manuals    OS Certification Matrix    Quick-References Guide  Drive Options   Network Card (AOC) Matrix

Product SKUs
SYS-F628R3-RTBPTN+
  • SuperServer F628R3-RTBPTN+ (Black)
 
Motherboard

Super X10DRFR-NT
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores† / Up to 55MB† Cache
System Bus
  • QPI up to 9.6 GT/s
Note † BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type
  • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
 
Input / Output (per node)
Serial ATA
  • 10 SATA3 (6Gbps) ports
NVMe
  • 2 Internal NVMe ports (PCI-E 3.0 x4)
    Note: NVMe support requires 2 CPUs installed
LAN
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports
VGA
  • 1 VGA port
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-F424AS-R1K28BP
 
Dimensions and Weight
Width
  • 17.63" (448mm)
Height
  • 6.96" (177mm)
Depth
  • 29" (737mm)
Package
  • 28.3" (W) x 15.0" (H) x 42.4" (D)
Weight
  • Net Weight: 105 lbs (47.63 kg)
  • Gross Weight: 150 lbs (68.04 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2 Network activity LEDs
  • Information LED (UID, Fan failure, Overheat)
 
Expansion Slots (per node)
PCI-Express
 
Drive Bays (per node)
Hot-swap
  • 8x 3.5" Hot-swap SATA3 or 6x 3.5" Hot-swap SATA3 + 2x NVMe
 
Backplane
  • 1 SAS/SATA backplane
  • 1 SAS/SATA/NVMe hybrid (2 slots)
 
System Cooling (per node)
Fans
  • 2x 8cm 11k RPM middle fans
 
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
  • 1000W Output @ 100-140V, 8-12A, 50-60Hz
  • 1280W Output @ 180-240V, 6-8A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified95%+
  Platinum Certified
  [ Test Report ]
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
See Parts List
Parts List - (Items Included)
 
 Part Number
 Qty
 Description
Motherboard / Chassis MBD-X10DRFR-NT
CSE-F424AS-R1K28BP		 4
1		 Super X10DRFR-NT Motherboard
4U Chassis
Backplane BPN-SAS-F424-A6 4 6-port Fat Twin 6Gbps hot swappable HDD backplane, support up to 6x 3.5-inch SAS/SATA HDD
Backplane BPN-ADP-F418LS 4 Power Distribution Board for X10DRFR,RoHS/REACH,PBF
Backplane BPN-SAS3-F424-A2N2 4 2x-port Fat Twin SAS3 12Gbps hybrid backplane, support up to 2x 3.5-inch SAS3/SATA3/NVMe storage devices
Cable 1 CBL-0486L 8 2x2 to 2x2 15cm power cable HF. 18AWG
Cable 2 CBL-0489L 8 SATA,INT,ROUND,ST-RA,70CM,30AWG
Cable 3 CBL-0157L-02 8 CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,27CM,28AWG
Cable 4 CBL-0480L 4 4 pins to 4 pins 40cm PDB to MB power cable HF. 18AWG
Cable 5 CBL-OTHR-0022L 4 20 to 20 pin cable for BPN-ADP-F418LS,7.5cm, 28AWG,RoHS/REACH,PBF
Cable 6 CBL-0481L 4 SATA,INT,ROUND,ST-ST,81CM,30AWG
Cable 7 CBL-PWCD-0900 4 PWCD,US/EU/Canada/China/Australia,IEC60320 C14 TO C13,4FT,17AWG
Cable 8 CBL-SAST-0623 8 MINI SAS HD,INT,PCIe NVMe SSD, 45CM,30AWG
Cable 9 CBL-SAST-0692 4 Internal cross-over mini SAS HD to 2 SATA, S. 23cm. 30AWG [Amphenol],RoHS/REACH
Cable 10 CBL-0484L 12 SATA,INT,ROUND,ST-ST,55CM,30AWG
Label LBL-0108 1 CAUTION LABEL FOR REDUNDANT PWR SYSTEMS
Manual MNL-1759-QRG 1 Quick Reference Guide for F628R3-RTBN+/RTBPTN+
Heatsink / Retention SNK-P0048P 4 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Square ILM MB
Heatsink / Retention SNK-P0048PS 4 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB
Power Supply PWS-1K28P-SQ 4 1U 1280W, redundant single output power supply


Optional Parts List
  Part Number Qty Description
Software SFT-OOB-LIC • 4 OOB Management Package (per node license)
Software SFT-DCMS-Single 4 DataCenter Management Package (per node license)
Drive Carrier MCP-220-93801-0B 2/node Drive carrier 3.5" to 2.5" with adapter tray
Additional Power Kit:
Mounting Bracket
Power adapter Board		  
MCP-120-42405-0N
BPN-ADP-2UPWR-O-P		  
1/node
1/node		  
2nd power adapter mounting bracket *
Power adapter board *

* Required for certain configurations. Please contact Supermicro for additional details.
Hide Parts List
Terms & Conditions   |   Privacy   |   Investor Relations   |   Jobs   |   Site Map
SuperServer® | Motherboard | Chassis | Rack Cabinet | SuperBlade® | Embedded | Networking | Storage | Accessories | AMD Solution | Power Supplies
Copyright © 2019 Super Micro Computer, Inc.   
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Certain products may not be available in your region