|
|
|
|
|
Supermicro SSE-C4632 is the new generation 32 port 100Gbps switch designed to provide high performance and non-blocking with 6.4Tbps Switching capacity, best suitable for data center leaf and spine deployments. The SSE-C4632 is an extremely compact 1RU form factor with proven layer 2 and layer 3 features.
The Enterprise SONiC distribution offers benefits such as high performance and simplicity based on industry leading merchant silicon and standards based IP CLOS architecture. It also provides agility based on a flexible management framework with programmatic APIs and an extensible, container-based architecture.
SSE-C4632 can operate at variety of speeds such as 32x100Gbps QSFP28 or 32x40G QSFP+ or by using the breakout cables 64x50G QSFP56 or 128x25Gbps SFP28 or 10G SFP+. Switch comes with dual and redundant power supplies and FANs that are FRU capable. The included rail kit facilitates rack-mounting installations.
Pre-loaded with the Broadcom Enterprise Distribution SONiC OS, the SSE-C4632 is ready with extensive networking features plus hardware acceleration of routing and switching functions. And the software support is included in the switch standard warranty at no additional cost.
|
|
|
|
The SSE-C4632 series switch comes with preloaded Broadcom Advanced Enterprise SONiC OS.
No additional licensing is required.
|
|
|
Datasheet |
|
|
|
- Key Switch Specs / Advantages
- Form Factor: 1 RU
- Capacity: 6.4Tbps
- Interfaces Speeds: 10, 25, 40, 50, 100GbE
- Supported Configurations: 32x100GbE or 40GbE, 64x50GbE, 128x25/10GbE
- Operating System: Broadcom Advanced Enterprise SONiC OS
- 2MB memory packet buffer
|
|
|
- Physical Ports
- 32x QSFP28 Ports
- 1x RJ45 Serial Console
- 1x RJ45 100/1000BASE-T Management
- 1x USB Type A Storage
- Onboard CPU Engine
- INTEL Atom C1.6Ghz dual-core CPU
- 8GB DDR4 DRAM with ECC
- 32GB SSD
- Physical and Environmental
- 1RU, Mountable in either 19” or 21” racks
- Dimensions: (WxDxH) 434 x 521 x 43.8 mm (17.1 x 20.52 x 1.72 inches)
- Weight: (Switch Unit) 10kg
- Front-to-Rear and Rear-to-Front airflow versions available
- 2x Redundant, Hot Swappable PSUs
- Hot Swappable 3+1 redundant Fan Modules
- Input Voltage: 100 to 240V AC at 5-60Hz
- 800W Maximum Power (with Pluggable Optic)
- Temperature: Operating 0°C to 45°C (32°F to 113°F)
- Humidity: Operating: 0% to 95% RH
|
|
|
- Taiwan (BSMI):
- Korean (KCC):
- China (CCC):
|
|
|
- EU:
- CISPR 32
- EN 55032
- BS EN 55032
- CISPR 35
- EN 55035
- BS EN 55035
- EN6100-3-2
- BS EN 6100-3-2
- EN6100-3-3
- BS EN 6100-3-3
- EN 300 386
- North America:
- 47CFR Part 15(CFR 47) Class A
- ICES003 issue7 Class A
- Japan (VCCI):
- Taiwan (BSMI):
- Korean (KCC):
- China (CCC):
|
|
|
- EU (RoHS)
- EU (REACH)
- EU (WEEE)
- Taiwan (RoHS)
- China (RoHS)
|
|
|
|
|
- System and Platform Infrastructure Features
- Dynamic Port Breakout
- DOM Information Display
- System Locator LED Support (Beacon)
- CMIS 4.0 Optics Support
- Hardware Watchdog
- CoPP (Control Plane Policing)
- Transceiver Parameter Tuning
- Third-Party Container Management
- PDDF and PDK Framework
- Interface Aliasing (IS-Standard and IS-Standard-Extended Interface Naming)
- Kdump Support
- Maintenance Mode
- LACP Graceful Shut
- BGP Graceful Shut
- OSPFv2 Maximum Metrics
- Multi-Instance Redis DB
- Hardware Resource Allocation and Reservation
- Zero Touch Provisioning (ZTP)
- Auto Negotiation and Link Training
- Link Statistics Enhancements
- Link-Down Reason Codes
- Link Flap Error-Disable
- Forwarding Plane Drop Counters
- Time Zone Command Support
- 2 × 50G Speed Support
- Broadcom Debug Tool
- Memory Histogram
- System Ready for Services and Applications
- Secure Boot Process and Reference Implementation
- Syslog High Threshold notifications and clear for CPU/Temperature
- Per Platform CoPP
- Interface Beacon LED
- ZTP Provisioning using a USB Drive
- Flexible DPB
- Support Option to Bind the Third Party Container to the Management VRF
- Limiting CPU/Memory/Disk Usage for Third Party Containers
- Patching Support in SONiC (Patch Host/Containers)
- Option to Send Audit Log Messages to Syslog Server
- Ability to Filter Logs based on Facility and Severity
- Media AutoFEC for FEC Type automation
- Layer 2 Features
- VLAN Auto-state
- Interface Hold-Down
- LACP Graceful Shutdown
- link Tracking
- L2 MC-LAG
- L2 VXLAN
- L2 LVTEP
- LACP Fast Rate and LACP Fallback
- Static LAG
- LLDP
- UDLD
- MC-LAG Fallback
- MC-LAG Graceful Shutdown
- xSTP over MC-LAG
- PVST and RPVST+
- PVST and RPVST+ over MC-LAG
- DHCP snooping
- VLAN stacking (QinQ)
- Port Channel Min-Links configuration enhancement
- Layer 3 Features
- DHCP Relay Enhancements
- DHCP Relay over VXLAN Overlay Interfaces
- DHCP Relay Source Interface Selection (e.g. loopback)
- DHCP Relay over IPv6 Link-Local Interfaces with RFC5549 Routes
- DHCP Relay Hop Count Configuration
- DHCP Relay Over IPv4 Unnumbered Interfaces
- DHCP Relay Option 82, Sub Option 151 VRF Name/ID Option
- DHCP Relay Option 82, Sub Option 5 Link-Selection Option RFC3527
- Support for Circuit-Id Formats
- DHCP Relay Circuit-Id Option
- DHCP Relay and DHCP snooping support on the same VLAN
- Support for 4K L3 VLAN Interfaces
- Dynamic BGP Neighbor
- IP Fabric over IPv6 underlay RFC5549
- IP Helper
- L3 MC-LAG
- L3 VXLAN
- L3 LVTEP
- Routing Subinterface
- Advertise PIP for both ACT-ACT and ACT-STBY on the Same Leaf Pair
- Route Leaking across VRFs including Management VRF
- BGP Docker Warm Restart
- Avoid Netlink for Handling IPv6 Link-Local Address
- BFD Optimizations to Support 5x100msec Aggressive Timers in SW
- IP SLA (ICMP and TCP tracker)
- IPv4 Unnumbered Interfaces
- RPVST+ over MC-LAG
- RPVST+ Scaling to 3500 VLAN Ports
- Symmetric Hashing
- VXLAN over SVI Interface
- BGP for EVPN (with MLAG)
- BFD IS-CLIs
- BFD with VRF
- VRF support for syslog
- VRF support for SSH.in
- VRRPv3, VRRP/VRRPv3 over VRF
- Management VRF Hardening
- NAT
- OSPFv2
- Multi Site Data Center Interconnect (DCI)
- RIB/FIB Consistency Checker
- Next Hop Group (NHG) Support
- RIF Counters for L3 Interfaces
- BFD Profile
- 4K L3 VLAN Interface Scale for SAG and Unique-IP Cases
- Nexthop resolution using default route
- MC-LAG Peer Gateway
- 1 Million Route Scale
- Route Updates Performance Improvements
- Drop Neighbor Entry to Protect CPU from Unknown IP Packets Hitting the CPU
- CPU Offload for Neighbor Suppression
- CPU Offload for Slowpath ARP Flooding
- OSFPv2 GR
- Router Advertisement KLISH/REST/gNMI Support
- CLI Commands for RA Retransmission Interval, RADv Disable
- RFE-8106
- ACL and Flow-Based Services
- PBR Enhancements for Service Chaining
- ACL-based CoPP
- ACL DSCP Map/Remarking
- ACL Rate Limiting
- Control Plane ACL
- Policy-based Routing (IPv4 and IPv6)
- ACL-based Packet Replication
- ACL Consistency Checker
- Security Features
- RADIUS and TACACS
- RADIUS/TACACS Password Obfuscation
- NTP Server and NTP Authentication
- NTP Prefer Option
- LDAP Integration
- AAA Authorization support with TACACS+
- Manageability Features
- Industry Standard CLI (IS-CLI)
- REST and gNMI Interfaces via OpenConfig YANG (OC-YANG)
- Role-Based Access Control (RBAC)
- RBAC and HAMd Enhancements
- SNMP Configuration Traps and OIDs
- Configuration Services – Chef for EVPN
- gNMI Subscription Support for Limited YANG Paths (OnChange, Interval, Once, Poll, Target defined)
- Bulking support in both REST(YANG patch) and gNMI
- Query parameter for REST and filtering support for gNMI
- Scalar encoding support for gNMI
- Support to Read Service Tag via SNMP
- SNMP Trap Enablement on Interface Instead of Global
- Multicast Features / Enhancements
- L3 Multicast with PIM operates on L3 interfaces only
- IGMP
- IGMP Snooping (v1, v2, v3) (with MLAG)
- IPv4 PIM-SSM Support
- Debuggability / Serviceability features
- In-memory Debug Logging
- Audit Logging and Syslogs
- Command to Return Interfaces to the Default Configuration
- Port Mirroring on Port Channel and VLAN
- Scalability improvements
- L3 VLAN Scale to 4K (for TD3-X7 based Platforms)
- Host Table Resource Reservation for Local Hosts
- QoS
- RoCE V2 Support
- DSCP Marking Preservation for VXLAN
- QoS Map Support for Remarking and SVI
- BUM Storm Control
- Port and Priority Shaping
- Telemetry and Instrumentation
- sFlow on Management VRF
- Inband Flow Analyzer (IFA) 2.0
- Drop Monitor
- Tail Stamping
- BST – Watermarks,
- Thresholds, and Snapshots
- Linux PTP (KNETSync)
- SONiC readiness for Campus use case
- Port Access Control
- 802.1X
- MAC Authentication Bypass (MAB)
- RADIUS Support
- Multiple RADIUS Servers
- RFC 2865 — RADIUS Client
- RFC 2868 — RADIUS Attributes for Tunnel Protocol Support
- RFC 3579 — RADIUS Support for EAP
- Authentication Tiering
- Downloadable ACLs
- Dynamic ACL
- Named ACLs
- Per-session ACLs
- Filter-Id
- Posture Assessment (Redirect ACL/URL, COA Using DAS)
- Guest VLAN
- Unauth VLAN
- Open VLAN
- Monitor Mode
- STP
- Port Default to Access VLAN
- MSTP
- Port MAC Security
- LLDP-MED
- Digital Optical Monitoring (DOM)
- Time Domain Reflectometry (TDR)
- EVPN VXLAN
- Warmboot
|
|
|
|
|
|
|
|
|
|
|
Part Number |
Description |
Layer 2/3 100G Ethernet Switch |
SSE-C4632SB |
AC Power Supply with Regular Airflow (front to back) |
SSE-C4632SRB |
AC Power Supply with Reverse Airflow (back to front) |
|
|
|
|
Cable Type |
Cable Model |
Length |
SMC P/N |
100G DAC |
Passive Copper cable, 100GbE, 100Gb/s, QSFP, LSZH, 0.5m |
0.5M |
CBL-NTWK-0942-MQ28C05M |
100G DAC |
Passive Copper cable, 100GbE, 100Gb/s, QSFP, LSZH, 1m |
1M |
CBL-NTWK-0942-MQ28C10M |
100G DAC |
Passive Copper cable, 100GbE, 100Gb/s, QSFP, LSZH, 1.5m |
1.5M |
CBL-NTWK-0942-MQ28C15M |
100G DAC |
Passive Copper cable, 100GbE, 100Gb/s, QSFP, LSZH, 2m |
2M |
CBL-NTWK-0942-MQ28C20M |
100G DAC |
Passive Copper cable, 100GbE, 100Gb/s, QSFP, LSZH, 2.5m |
2.5M |
CBL-NTWK-0942-MQ28C25M |
100G DAC |
Passive Copper cable, 100GbE, 100Gb/s, QSFP, LSZH, 3m |
3M |
CBL-NTWK-0943-SQ28C30M |
100G to 25G DAC splitter |
ETHERNET,100GbE/QSFP28 to 4x 25GbE/SFP28,PASSIVE,1M,30AWG |
1M |
CBL-NTWK-0988-Q28M1 |
100G to 25G DAC splitter |
ETHERNET,100GbE/QSFP28 to 4x 25GbE/SFP28,PASSIVE,2M,30AWG,Ro |
2M |
CBL-NTWK-0988-QS28C20M-3 |
100G to 25G DAC splitter |
ETHERNET,100GbE/QSFP28 to 4x 25GbE/SFP28,PASSIVE,3M,30AWG,Ro |
3M |
CBL-NTWK-0988-Q28M3 |
100G to 25G DAC splitter |
ETHERNET,100GbE/QSFP28 to 4x 25GbE/SFP28,PASSIVE,5M,26AWG |
5M |
CBL-NTWK-0988-Q28M5 |
100G to 25G AOC splitter |
100GbE/QSFP28 to 4x 25GbE/SFP28 |
10M |
CBL-NTWK-MFA7A50-C010 |
100G Transceivers |
TXCVR, QSFP28,100GBASE-DR1, |
up to 500M |
TRX-100G-DR1-03 |
Global Services & Support |
OS4HR3/2/1 OSNBD3/2/1 |
3/2/1-year onsite 24x7x4 service 3/2/1-year onsite NBD service |
|
|
|
|
|
|
|