|
|
|
| |
| SYS-2029P-C1RT |
- SuperServer 2029P-C1RT (Black)
|
|
|
CPU |
- Dual Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
Dual UPI up to 10.4GT/s
- Support CPU TDP 70-205W
|
Cores |
|
Note |
‡
BIOS version 3.2
or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
* CPU SKUs not supported: Gold 6256 and Gold 6250(L) (L = increased memory capacity per socket), Gold 6233W and Gold 5216W |
|
|
Memory Capacity |
- 16 DIMM slots
- Up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
Memory Type |
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.
|
| |
| Chipset |
|
SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
SAS |
- Broadcom 3108 SAS3 (12Gbps) controller;
HW RAID 0, 1, 5, 6, 10, 50, 60
|
Network Controllers |
- Intel® X722 10GBase-T Ethernet Controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2500 BMC
|
Graphics |
|
| |
| SATA |
|
SAS |
|
LAN |
- 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 2 USB 3.0 ports (2 rear)
- 4 USB 2.0 ports (2 rear, 2 front)
- 1 USB Type A
|
Video |
|
Serial Port / Header |
- 2 Fast UART 16550 serial
- 2 COM Ports (1 rear, 1 front)
|
|
|
BIOS Type |
|
|
|
Software |
|
Power Configurations |
|
|
|
CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Height |
|
Width |
|
Depth |
|
Package |
- 11" (H) x 29" (W) x 38.7" (D)
|
Weight |
- Net Weight: 38 lbs (17.4 kg)
- Gross Weight: 63 lbs (28.8 kg)
|
Available Color |
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
|
|
PCI-Express |
- 4 PCI-E 3.0 x16 slots
- 1 PCI-E 3.0 x8 slot
- Support total of 5 Low-profile AOC
|
| |
| Hot-swap |
- 8x 2.5" SAS3 and 8x 2.5" SATA3 Hot-swap drive bays
|
Peripheral |
- Optional DVD-ROM drive supports 1x slim or 1x 5.25" DVD drive
|
Optional |
- Optional 2 NVMe/SSD/HDD 2.5" fix drives
- 1 M.2 support
|
| | |
| Fans |
- 3 Heavy duty 8cm fans with PWM fan speed and cooling zone control
|
| |
| 1200W Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension (W x H x L) |
|
Input |
- 100-127Vac / 15-12A / 50-60Hz
- 200-240Vac / 8.5-7A / 50-60Hz
- 200-240Vdc / 8.5-7A (for CCC only)
|
+12V |
- Max: 83A / Min: 0A (100-127Vac)
- Max: 100A / Min: 0A (200-240Vac)
- Max: 100A / Min: 0A (200-240Vdc)
|
+5Vsb |
|
Output Type |
- 19 Pairs Gold Finger Connector
|
Certification |
Titanium Level [ Test Report ]
|
| |
| RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X11DPi-NT
CSE-213AC-R1K23LPB |
1 1 |
Super X11DPi-NT Motherboard
2U Black SC213AC Chassis |
Add-on Card / Module
|
AOC-S3108L-H8IR-16DD |
1
|
LSI 3108 based SAS3 RAID, 12Gb, 8 internal ports, 16 drives with expander - RAID 0,1,10,5,6,50,60, Gen3 x8 Standard Low Profile |
Backplane
|
BPN-SAS3-213A |
1
|
16-port 2U SAS3 12Gbps direct-attached backplane, support up to 16x 2.5-inch SAS3/SATA3 HDD/SSD |
Cable 1
|
CBL-SAST-0508-01 |
2
|
MINI SAS HD-MINI SAS,6G,INT,50CM,SB,30AWG |
Cable 2
|
CBL-SAST-0508-02 |
2
|
MINI SAS HD-MINI SAS,6G,INT,50CM,SB,30AWG |
Cable 3
|
CBL-SAST-0532 |
1
|
MINI SAS HD,12G,INT,50CM,30AWG |
Cable 4
|
CBL-SAST-0568 |
1
|
MINI SAS HD,12G,INT,35CM,30AWG |
Drive Tray(s)
|
MCP-220-00007-01 |
1
|
Black USB/COM port tray for SC825, 836 |
Parts
|
MCP-260-00042-0N |
1
|
STD I/O shield for X9 socket R server MB with Gasket. |
Manual
|
MNL-1993-QRG |
1
|
SYS-2029P-C1R/SYS-2029P-C1RT, QRG |
Heatsink / Retention
|
SNK-P0068PS |
1
|
2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Heatsink / Retention
|
SNK-P0068PSC |
1
|
2U Passive CPU Heat Sink with a Side Air Channel for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Power Supply
|
PWS-1K23A-1R |
2
|
AC-DC 1200W, Titanium Level, Redundancy, 1U, PMBUS 1.2, +12V/+5Vsb, 360x76x40 mm,HF,RoHS/REACH |
FAN 1
|
FAN-0181L4 |
3
|
80x80x38 mm, 9.4K RPM, Hot-swappable Middle Cooling Fan for X11 Purley Platform Newly Enabled 2U+ Chassis |
|
|
|
| |
| |
Part Number |
Qty |
Description |
Storage Controller Card(s) & Cables(s) |
AOC-S3008L-L8i & 2x CBL-SAST-0531-01
AOC-S3008L-L8e & 2x CBL-SAST-0531-01
AOC-S3108L-H8IR & 2x CBL-SAST-0531-01
AOC-S3108L-H8IR-16DD & 2x CBL-SAST-0531-01
|
- |
Standard LP, 8 internal ports (12Gb/s) Gen-3, 63HDD; RAID 0, 1, 10
Standard LP, 8 internal ports (12Gb/s) Gen-3, 122HDD; HBA
Standard LP, 8 internal ports (12Gb/s) 8x Gen3; RAID 0, 1, 5, 6, 10, 50, 60
Standard LP, 8 internal ports (12Gb/s) Gen-3, 16HDD; RAID 0, 1, 5, 6, 10, 50, 60
|
Cable Management Arm |
MCP-290-00073-0N |
1 |
Supermicro Cable Management Arm for 2U, 3U and 4U chassis (Extendable Length: 70mm to 830mm) |
Adaptor Bracket |
MCP-120-82503-0N |
1 |
Cable arm adapter for SC825LP,213LP (MCP-290-00073-0N required),HF,RoHS/REACH,PBF |
SATA DVD Kit |
MCP-220-81502-0N |
1 |
Slim SATA DVD mounting kit for SC213,219,813,815,818,819,825,828,829,836,842 |
2.5" NVMe fixed drive support |
MCP-220-00160-0N |
1 |
Dual 2.5" NVMe Drive BKT: 743, 745, 502, 503, 510, 512, 515 |
2.5" NVMe fixed drive support |
CBL-SAST-0956 |
1 |
Oculink to 1 NVMe drive w/ power, each NVMe drive needs 1 cable, system can support total 2 NVMe fixed drives |
5.25" SATA DVD drive |
5.25" DVD reader or writer |
1 |
Any third party 5.25 inch SATA DVD reader or writer |
SATA cable for DVD drive |
CBL-0178L |
1 |
SATA CABLE 48CM FLAT S-S PBF. 26AWG |
SATA Power cable for DVD drive |
CBL-0080L |
1 |
Big 4 pin to SATA POWER ADAPTER CABLE 6", 18AWG |
Global Services & Support |
OS4HR3/2/1 OSNBD3/2/1 |
- - |
3/2/1-year onsite 24x7x4 service 3/2/1-year onsite NBD service |
Software |
SFT-OOB-LIC • |
1 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|
|
|
|