|
|
|
| |
| SSG-5049P-E1CR45H |
- SuperStorage 5049P-E1CR45H (Black)
|
|
|
CPU |
- Single Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡
- Support CPU TDP up to 165W
|
Cores |
|
Note |
‡
BIOS version 3.2
or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information. |
|
|
Memory Capacity |
- 8 DIMM slots
- Up to 2TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
|
Memory Type |
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
|
|
|
Chipset |
|
SATA |
- SATA3 (6Gbps) via Intel® C621 controller
- RAID 0, 1, 5, 10 support
|
SAS |
- Broadcom 3108 SAS3, HW RAID
(AOC-S3108L-H8IR-P)
|
Network Controllers |
- Dual 1GbE LAN ports with Intel® I210
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
Graphics |
|
|
|
LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A)
- 8 USB 2.0 ports (2 rear + 6 headers)
|
VGA |
|
Serial Port / Header |
- 2 COM Ports (1 rear, 1 header)
|
|
|
BIOS Type |
|
|
|
Software |
|
Power Configurations |
|
|
|
CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Width |
|
Height |
|
Depth |
|
Weight |
- Gross Weight: 120 lbs (54.43 kg)
- Net Weight: 85 lbs (38.56 kg)
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- Network activity LEDs
- System Information LED
- Power fail LED
|
|
|
PCI-Express |
- 2 PCI-E 3.0 x8 (in x16)
- 3 PCI-E 3.0 x8
- 1 PCI-E 3.0 x4 (in x8)
- 1 PCI-E 3.0 x8 (occupied by HBA card)
|
M.2 |
- 1x M.2 Interface: PCI-E 3.0 x4 and SATA
- Form Factor: 2280, 22110
- Key: M-Key
- Double Height Connector
|
| |
| Hot-swap |
- 45 Hot-swap 3.5" SAS3/SATA3 drive bays
- 2 Rear Hot-swap 2.5" SATA3 drive bays
|
Optional |
- 2 Hot-swap 2.5" NVMe/SATA drive bays (rear)
|
| |
| SAS3 / SATA3 single expander per backplane |
| |
| Fans |
- 5 High-performance 80mm cooling fans
|
| |
| 1600W 1U Redundant Power Supplies with PMBus |
Total Output Power |
- 1000W: 100 – 127Vac
- 1600W: 200 – 240Vac
|
Dimension (W x H x L) |
|
Input |
- 100-127Vac / 12.9A Max / 50-60Hz
- 200-240Vac / 9.5A Max / 50-60Hz
|
+12V |
- Max: 82A / Min: 0.1A (100-127Vac)
- Max: 132A / Min: 0.1A (200-240Vac)
|
+5Vsb |
|
Output Type |
- 25 Pairs Gold Finger Connector
|
Certification |
Platinum Level [ Test Report ]
|
| |
| RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X11SPL-F
CSE-946LTS-R1K66P1 |
1 1 |
Super X11SPL-F Motherboard
4U Chassis |
Backplane
|
BPN-SAS3-826TQ-B2B |
1
|
2-port 2U SAS3 12Gbps backplane, support up to 2x 2.5-inch SAS3/SATA3 HDD/SSD |
Backplane
|
BPN-SAS3-946LEL1 |
1
|
45-port 4U SC946L Top-load SAS3 12Gbps expander backplane, support up to 45x 3.5-inch SAS3/SATA3 HDD/SSD |
Cable 1
|
CBL-CDAT-0674 |
1
|
4 Pin to 4 Pin I2C cable, 30cm, 26AWG, 4 wires, pinout 1-1, for vpp header(jnvi2c1),RoHS/REACH |
Cable 2
|
CBL-PWCD-0578 |
2
|
PWCD,US,IEC60320 C14 TO C13,3FT,14AWG |
Cable 3
|
CBL-PWEX-0863 |
1
|
Powerlug to 5.7 Radsok, yel 12AWG, 32cm for SC946S |
Cable 4
|
CBL-PWEX-1024 |
1
|
Powerlug to 5.7 Radsok, black 12AWG, 45cm,RoHS |
Cable 5
|
CBL-SAST-0834 |
2
|
SLIMLINE SAS to MiniSAS HD, INT, 50CM, 32AWG |
Heatsink / Retention
|
SNK-P0068PS |
1
|
2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Power Supply
|
PWS-1K66P-1R |
2
|
1U 1600W Redundant Platinum Power Supply 73.5mm width,RoHS/REACH,PBF |
FAN 1
|
FAN-0184L4 |
5
|
80x80x38 mm, 14.4K RPM, Rear Exhaust Fan for SC946S Chassis (60-bay) |
Add-on Card |
AOC-S3108L-H8IR |
1 |
LSI 3108 based SAS3 RAID, 12Gb, 8 internal ports, 240HDD - RAID 0,1,10,5,6,50,60, Gen3 x8 Standard Low Profile |
|
|
|
| |
| |
Part Number |
Qty |
Description |
Peripheral Drives |
MCP-220-82616-0N |
1 |
Rear hot-swap 2x 2.5" SATA drive kit |
CacheVault |
BTR-CV3108-U1 |
1 |
Broadcom 3108 CacheVault kit |
Network Card(s) |
AOC-SGP-i2
AOC-SGP-i4
AOC-STGN-i2S
AOC-STGF-i2S
AOC-STG-B4S
AOC-STGS-i2T
AOC-S25G-b2S
AOC-S25G-m2S |
-
-
-
-
-
-
-
- |
Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350-AM2
Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350
Standard Lp, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES
Standard Lp, 2x 10GbE SFP+, PCI-E x8, Intel X710-BM2
Standard Lp, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
Standard Lp, 2x 10GbE RJ45, PCI-E x8, Intel X550-AT2
Standard LP, 2x 25GbE SFP28, PCI-E x8, Broadcom BCM57414
Standard LP, 2x 25GbE SFP28, PCI-E x8, Mellanox CX-4 LX |
NVMe Optional Parts (Complete System with NVMe Drives) |
MCP-220-82619-0N
CBL-SAST-0849
AOC-SLG3-2E4
CBL-0234L |
1
2
1
1 |
Rear hot-swap 2.5" x2 NVMe drive kit
OCuLink v1.0 INT PCIe NVMe SSD, 65CM, 34AWG
Standard LP, Dual-Port NVMe Internal Host Bus Adapter
4-PIN Y-cable for HDD 15CM |
TPM security module |
AOM-TPM-9670VAOM-TPM-9671V |
11 |
TPM 2.0, vertical form factorTPM 1.2, vertical form factor |
Global Services & Support |
OS4HR3/2/1 OSNBD3/2/1 |
- - |
3/2/1-year onsite 24x7x4 service 3/2/1-year onsite NBD service |
Software |
SFT-OOB-LIC • |
1 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|