 |
 |
| SBI-7126T-T1L |
- Processor Blade SBI-7126T-T1L (Black)
|
| |
|
Super B8DTL-L
|
| |
|
| Processeur
|
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit
Xeon® processor(s) of the same type
below:
- Intel®
Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 95W
- Intel®
Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
| QPI
|
|
| |
|
| Memory
Capacity |
- 6x 240-pin DIMM slots
- Supports up to 96 GB 1333 / 1066 / 800MHz DDR3
ECC Registered memory
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3
ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory
Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC
Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM
Sizes |
- 1GB, 2GB, 4GB
, 8GB
, 16GB
|
| Memory
Voltage |
|
| Error
Detection |
- Corrige les erreurs mono-bit
- Détecte les erreurs double-bit (à l'aide de la mémoire ECC)
- Supports Intel® x4 and x8 Single Device
Data Correction (SDDC)
|
| |
|
| Jeu de puces
|
- Intel® 5500 (Tylersburg) chipset
- ICH10R + IOH-24D
|
| SATA
|
- Intel ICH10R SATA 3.0Gbps Controller
- Prise en charge RAID 0 et 1
|
| IPMI
|
- Support for Intelligent Platform Management
Interface (IPMI) v.2.0 via Chassis Management Module
(CMM)
|
| Network
Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet
- Intel® I/OAT 3 support for
fast, scaleable, and reliable networking
- VMDq support for better
performance of virtualization
|
| Super
I/O |
|
| Clock
Generator |
|
| |
|
| BIOS
Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI jusqu'à 3.0
- Prise en charge des claviers USB
|
|
|
|
|
| Hauteur
|
|
| Largeur
|
|
| Profondeur
|
|
| Poids
|
|
| Available
Colors |
|
| |
|
| Boutons
|
- Bouton marche/arrêt
- Bouton KVM
|
| LED
|
- LED d'alimentation
- Voyant UID/KVM
- LED d'activité réseau
- Voyant de défaut
|
| Connecteur |
- Connecteur SUV (série/USB/vidéo) et KVM
|
| |
|
| Remplacement à chaud |
- 2x 3.5" SATA Hot-swap drive bays
|
| |
|
| KVM
|
- 1 Front Connector for Supermicro KVM Card
|
| |
| Environmental
Spec. |
- Operating Temperature: 10°to 35°C
(50°to 95°F)
- Non-operating Temperature: -40°to 70°C
(-40°to 158°F)
- Operating Relative Humidity: 8% to 90%
(non-condensing)
- Non-operating Relative Humidity: 5 to 95%
(non-condensing)
|
| |
| United States
/ Canada |
- Vérification des émissions de la FCC (États-Unis)
|
| Europe
|
- EN55022 - Émissions
- EN55024 - Immunité
- EN61000-3-2 - Harmoniques
- EN61000-3-3 - Scintillement de tension
- Directive CE - CEM 89/336/CEE
|
| |
| United States
/ Canada |
- UL60950-1 - CSA/CUL 60950-1
|
| Europe
|
- EN60950-1, CE - Directive Basse Tension 73/23/EEE
|
|
