|
|
Key Features
Compute Intensive Applications
Data Center, HPC and Enterprise Applications
Hyperscale, Hyperconverged
4U 8 node system, each node:
1. Dual Socket P (LGA 3647) support
2nd Gen Intel® Xeon® Scalable
processors (Cascade Lake/Skylake)‡
2. 12 DIMMs; up to 3TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM††
3. 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x8 (LP),
1 PCI-E 3.0 x16 (for
SIOM
)
4. 2 or 4 Fixed 2.5" SATA3/NVMe drive bays
M.2 Interface: 2 SATA/PCI-E 3.0 x4,
RAID 0 and 1
M.2 Form Factor: 2260, 2280, 22110
M.2 Key: M-Key
5. Dual GbE ports via SIOM Network card,
1 dedicated IPMI LAN port (front)
6. 1 VGA, 2 USB 3.0 ports (front)
7. 8x 8cm 13.5k RPM rear fans
per enclosure
8. 2200W Redundant Power Supplies
Titanium Level (96% Efficiency)
|
|
|
|
|
|
|
|
| |
| SYS-F619P2-FT |
- SuperServer F619P2-FT (Black)
|
|
|
CPU |
- Dual Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
Dual UPI up to 10.4GT/s
- Support CPU TDP 70-165W with IVR
|
Cores |
|
Note |
‡
BIOS version 3.2
or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) |
|
|
Memory Capacity |
- 12 DIMM slots
- Up to 3TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
Memory Type |
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.
|
|
|
Chipset |
|
SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
Network Controllers |
- Flexible networking via
SIOM
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
Graphics |
|
|
LAN |
- SIOM flexible Network card
- 1 RJ45 Dedicated IPMI LAN port (front)
|
USB |
|
VGA |
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
|
|
Software |
|
Power Configurations |
|
|
|
CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Width |
|
Height |
|
Depth |
|
Package |
- 28.3" (W) x 15.0" (H) x 42.4" (D)
|
Weight |
- Net Weight: 150 lbs (68.04 kg)
- Gross Weight: 200 lbs (90.71 kg)
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- UID button
|
LEDs |
- Power status LED
- Network activity LEDs
- Information LED (Fan failure, Overheat)
|
|
|
PCI-Express |
- 1 PCI-E 3.0 x16 (Low-profile)
- 1 PCI-E 3.0 x8 (Low-profile)
- 1 PCI-E 3.0 x16 (SIOM)
|
| |
| Fixed |
- 2 or 4 Fixed 2.5" SATA3/NVMe drive bays
|
M.2 |
- M.2 Interface: 2 SATA/PCI-E 3.0 x4, RAID 0 & 1
- M.2 Form Factor: 2260, 2280, 22110
- M.2 Key: M-Key
|
| |
| Fans |
- 8x 8cm 13.5k RPM rear fans per enclosure
|
| |
2200W Redundant Power Supplies with PMBus |
Total Output Power and Input |
- 1200W with Input 100-127Vac
- 1800W with Input 200-220Vac
- 1980W with Input 220-230Vac
- 2090W with Input 230-240Vac
- 2200W with Input 220-240Vac (for UL/cUL use only)
- 2090W with Input 230-240Vdc (for CCC only)
|
AC Input Frequency |
|
Dimension (W x H x L) |
|
+12V |
- Max: 100A / Min: 0A (100-127Vac)
- Max: 150A / Min: 0A (200-220Vac)
- Max: 165A / Min: 0A (220-230Vac)
- Max: 174.17A / Min: 0A (230-240Vac)
- Max: 183.3A / Min: 0A (220-240Vac)
|
5VSB |
|
Output Type |
|
Certification |
Titanium Level [ Test Report ]
|
| |
| RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X11DPFF-SN
CSE-F418IF3-R2K20BP |
8 1 |
Super X11DPFF-SN Motherboard
4U Chassis |
Backplane
|
BPN-ADP-X11DPFF |
8 |
Power adapter card for X11DPFF,RoHS |
Cable 1
|
CBL-CDAT-0910 |
8 |
CBL,SGPIO,2X5F TO 2X5F,P2.54, 14CM, 24AWG,RoHS |
Cable 2
|
CBL-PWCD-0578 |
4 |
PWCD,US,IEC60320 C14 TO C13,3FT,14AWG |
Cable 3
|
CBL-PWEX-1020 |
16 |
PWEX,2X4F/P4.2 TO 2X4F/P4.2,10.5CM,16AWG,RoHS |
Cable 4
|
CBL-PWEX-1020-11 |
16 |
PWEX,2X4F/P4.2 TO 2X4F/P4.2,10.5CM,16AWG,RoHS |
Cable 5
|
CBL-SAST-0757 |
8 |
INT MINI SAS HD to SAS 29px2 + 8p 2x4(5,12V) GPU PWR BLK,50cm,22/30AWG,RoHS/REACH |
Riser Card
|
RSC-P-6 |
8 |
RSC-P-6 (1U LHS TwinPro RSC with 1 PCI-Ex16),RoHS |
Riser Card
|
RSC-R1UF-E16R |
8 |
RSC-R1UF-E16R |
Heatsink / Retention
|
SNK-P0067PS |
8 |
1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Heatsink / Retention
|
SNK-P0067PSC |
8 |
1U Passive CPU Heat Sink with a 17-mm Wide Side Air Channel for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
*
Power Supply
|
PWS-2K04A-1R |
4 |
AC-DC 2000W, Titanium Level, Redundancy, 1U, PMBus 1.2, +12V/+5Vsb, 360x76x40mm,HF,RoHS/REACH |
*
Power Supply
|
PWS-2K20A-1R |
4 |
1U 2200W Redundant, Titanium, 76(W) X 40(H) X 336(L) mm |
*
Backplane
|
BPN-PDB-X11DPFF |
2 |
Power Middleplane for X11 FIO Fattwin,RoHS |
*
Rail Set
|
MCP-290-41803-0N |
1 |
Fat twin F418 / F424 Static Rail set support 28-33.5 inch depth rail,RoHS/REACH,PBF |
Notes: - Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|
|
|
|
| |
| |
Part Number |
Qty |
Description |
Connect 2x 2.5" NVMe Drive |
CBL-SAST-0950 |
1/node |
2x OcuLink v 1.0 to 2x PCIe SFF-8639 w/ Power, 35/57CM, 32/24/20 AWG |
Connect 4x 2.5" NVMe Drives *Consult with Technical Support |
CBL-SAST-0950MCP-120-00107-0N |
2/node1/node |
2x OcuLink v 1.0 to 2x PCIe SFF-8639 w/ Power, 35/57CM, 32/24/20 AWGFixed tool-less 2x 2.5" internal HDD bracket (2nd HDD required screws) |
Connect 4x 2.5" SATA Drives Working Conditions:
• CPU Watts: 165W or lower
• Ambient Temp: 30°C or lower
|
CBL-SAST-0673MCP-120-00107-0N |
1/node1/node |
MINI SAS HD-SAS 29Px4+2x4P x2,INT,47/47/57/57CM,22/30AWGFixed tool-less 2x 2.5" internal HDD bracket (2nd HDD required screws) |
Connect 2x 2.5" SAS Drives |
*Any Qualified LSI Card (Please refer to X11DPFF-SN Tested AOC List) |
1/node |
|
Connect 4x 2.5" SAS Drives Working Conditions:
• CPU Watts: 125W or lower
• Ambient Temp: 25°C or lower
|
CBL-SAST-0673MCP-120-00107-0NAny Qualified LSI Card (Please refer to X11DPFF-SN Tested AOC List) |
1/node1/node1/node |
MINI SAS HD-SAS 29Px4+2x4P x2,INT,47/47/57/57CM,22/30AWGFixed tool-less 2x 2.5" internal HDD bracket (2nd HDD required screws)- |
SuperCap Kit |
BTR-CV3108-TP2 |
1/node |
LSI 3108 CacheVault kit for SIOM based TwinPro, RoHS/REACH |
RAID Card |
AOC-S3108L-H8IR-16DD |
- |
LSI 3108 8 int 12Gb/s ports, 8xGen3, ROC - LP,16 HDD |
Software |
SFT-OOB-LIC • |
1 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|