 |
|
|
| |
 | | SYS-6028R-TDWNR |
- SuperServer 6028R-TDWNR (Black)
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Video |
|
| |
|
| SATA |
- 8x SATA3 (6Gbps) ports
- I-SATA 4 & I-SATA 5 support SATA DOM
|
| NVMe |
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 3x USB 3.0 ports (2 rear, 1 Type A)
- 4x USB 2.0 ports (2 rear, 2 headers)
|
| Video |
|
| Serial Port / Header |
|
| DOM |
- 2x SuperDOM (Disk on Module) ports
|
| |
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Width |
|
| Height |
|
| Depth |
|
| Package |
- 26.7" (W) x 11.4" (H) x 34.5" (L)
|
| Weight |
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
- Power fail LED
|
| |
|
| PCI-Express |
- 1 PCI-E 3.0 x16 (FHHL) slot
- 2 PCI-E 3.0 x8 (FHHL) slots
- 1 PCI-E 3.0 x8 (LP) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| | |
| | Hot-swap |
- 8x 3.5" Hot-swap SATA3 Drive Bays
- 4x 2.5" NVMe Drive Bays
|
| | |
| - SAS3/SATA3 Backplane
- 4x 2.5" NVMe drives |
| | |
| | Fans |
- 3x 8cm fans with optimal fan speed control
|
| | |
| 920W Redundant High-Efficiency Power Supplies w/ Power Distributor, PMBus 1.2, I2C, and PFC |
| AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC Output |
- +5V standby: 4A
- +12V: 75A
|
| With Power Distributor |
- +5V: 45A
- +3.3V: 24A
- -12V: 0.6A
|
| Certification |
Platinum Certified
[ Test Report ]
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS resuce hot keys
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
5°C to 40°C (41°F to 104°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|  | |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X10DDW-iN
CSE-826BAC4-R920WB |
1
1 |
Super X10DDW-iN Motherboard
2U Chassis |
| Air Shroud |
MCP-310-29017-0B |
1 |
SC826B/216B mylar shroud for X10DDW,HF,RoHS/REACH |
| Backplane |
BPN-SAS3-826A-N4 |
1 |
12-port 2U SAS3 12Gbps hybrid backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD/SSD and 4x SAS3/SATA3/NVMe Storage Devices |
| Cable 1 |
CBL-SAST-0507-01 |
2 |
MINI SAS HD-MINI SAS,6G,INT,80CM,SB,28AWG |
| Cable 2 |
CBL-SAST-0623 |
2 |
MINI SAS HD,INT,PCIe NVMe SSD, 45CM,30AWG |
| Cable 3 |
CBL-SAST-0590 |
2 |
MINI SAS HD,INT,PCIe NVMe SSD, 70CM,30AWG |
| Parts |
MCP-240-00146-0N |
1 |
2U WIO Half Length riser card bkt for SC825, 826, 213, 216,RoHS/REACH |
| Drive Tray(s) |
MCP-220-00116-0B |
4 |
Black gen-5 3.5-to-2.5 NVMe drive tray, Orange tab (for hotswap NVMe drive),RoHS/REACH |
| Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Manual |
MNL-1698-QRG |
1 |
SYS-6028R-TDWNR, QRG,HF,RoHS/REACH |
| Riser Card |
RSC-R2UW-E8R-UP |
1 |
2U RHS WIO Riser Card with a PCI-E x8 for UP MBs |
| Riser Card |
RSC-R2UW-2E8E16+ |
1 |
RSC-R2UW-2E8E16+-O-P |
| Heatsink / Retention |
SNK-P0048PS |
2 |
2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB |
| Power Supply |
PWS-920P-SQ |
2 |
920W 1U Redundant PWS W/ Quiet Mode |
| Rail Set |
MCP-290-00053-0N |
1 set |
Rail set, quick/quick, default for 2,3U 17.2"W |
|
|
|
| |
| | |
Part Number |
Qty |
Description |
| Network Card(s) |
AOC-SGP-i2
AOC-SGP-i4
AOC-SG-i2
AOC-SG-i4
AOC-STG-b4S
AOC-STGN-i2S
AOC-STGN-i1S
AOC-STG-i2T
AOC-STG-i2
|
-
-
-
-
-
-
-
-
-
|
Standard LP, 2x GbE RJ45, PCI-E x4, Intel® i350AM2
Standard LP, 4x GbE RJ45, PCI-E x4, Intel® i350
Standard LP, 2x GbE RJ45, PCI-E x4, Intel® 82575EB
Standard LP, 4x GbE RJ45, PCI-E x4, Intel® 82576EB
Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom® BCM57840S
Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel® 82599ES
Standard LP, 1x 10GbE SFP+, PCI-E x8, Intel® 82599ES
Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel® X540
Standard LP, 2x 10GbE CX4, PCI-E x8, Intel® 82598EB
|
| Global Services & Support |
OS4HR3/2/1
OSNBD3/2/1 |
-
- |
3/2/1-year onsite 24x7x4 service
3/2/1-year onsite NBD service |
| Software |
SFT-OOB-LIC •  |
1 |
OOB Management Package (per node license) |
| Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|
