|
|
|
| |
| SYS-F618H6-FTPT+ |
|
|
|
CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
|
|
Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
|
Chipset |
|
SAS |
- SAS3 (12Gbps) via Broadcom 3008
- SW RAID 0, 1, 10 support
|
SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1 Realtek RTL8211E PHY (dedicated IPMI)
|
Graphics |
|
|
|
SAS |
|
SATA |
|
LAN |
- 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
|
VGA |
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Width |
|
Height |
|
Depth |
|
Package |
- 25.6" (W) x 11.8" (H) x 48.0" (D)
|
Weight |
- Net Weight: 200 lbs (90.72 kg)
- Gross Weight: 240 lbs (108.86 kg)
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- UID button
|
LEDs |
- Power status LED
- 2 Network activity LEDs
|
|
|
PCI-Express |
- 2 PCI-E 3.0 x8 Low-profile via riser card
|
| |
| Fixed |
- 12 Fixed 3.5" SATA3 drive bays
- Optional 2.5" drives mounted in PCI-E slot
|
| |
| Fans |
- 8x 8cm heavy duty fans and PWM fan speed control
|
| |
2000W Redundant Power Supplies with PMBus |
Total Output Power |
- 1000W: 100 – 127Vac
- 1800W: 200 – 220Vac
- 1980W: 220 – 230Vac
- 2000W: 230 – 240Vac
- 2000W: 200 – 240Vdc (UL/cUL only)
|
Dimension (W x H x L) |
|
Input |
- 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
- 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
- 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz
- 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz
- 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only)
|
+12V |
- Max: 83.3A / Min: 0A (100-127 Vac)
- Max: 150A / Min: 0A (200-220 Vac)
- Max: 165A / Min: 0A (220-230 Vac)
- Max: 166.7A / Min: 0A (230-240 Vac)
- Max: 166.7A / Min: 0A (200-240 Vac)
(UL/cUL only)
|
+5Vsb |
|
Output Type |
- 27 Pairs Gold Finger Connector
|
Certification |
Titanium Level [ Test Report ]
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
| RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X10DRFF-CTG
CSE-F414IS3-R2K04BP |
4 1 |
Super X10DRFF-CTG Motherboard
4U Chassis |
Backplane
|
BPN-ADP-F418L |
4 |
BPN;SASADP;SAS827-H8;H8DTT;cable req |
Backplane
|
BPN-SAS-801T-A1 |
8 |
1-port 1U CSE-801 cold storage backplane with thermistor and individual HDD power cycle, support up to 1x 3.5-inch SAS2/SATA3 HDD/SSD |
Backplane
|
BPN-SAS-801T-A2 |
4 |
2-port 1U CSE-801 backplane with thermistor and individual HDD power cycle, support up to 2x 3.5-inch HDD/SSD |
Backplane
|
BPN-SAS-801T-A4 |
8 |
4-port 1U CSE-801 backplane with thermistor and individual HDD power cycle, support up to 4x 3.5-inch HDD/SSD |
Cable 1
|
CBL-0481L |
4 |
SATA,INT,ROUND,ST-ST,81CM,30AWG |
Cable 2
|
CBL-OTHR-0758 |
8 |
INT P0.3 40p to 40p HS FPC 85 ohms impedance,11cm,0.2mm thick,RoHS/REACH |
Cable 3
|
CBL-PWCD-0578 |
2 |
PWCD,US,IEC60320 C14 TO C13,3FT,14AWG |
Cable 4
|
CBL-PWEX-0821 |
4 |
PWYCB,2X4F/GPU to 3 2X2F,P4.2, 36/54/65CM, 18AWG, 5/12V |
Cable 5
|
CBL-PWEX-0822 |
4 |
PWYCB,2X4F/GPU to 2 2X2F,P4.2,39/41CM+2 RA SATA PWR 29CM,18G |
Cable 6
|
CBL-SAST-0556 |
4 |
MINI SAS HD-4 SATA,6G,INT,90/90,ST 75/75CM,75CM SB,30AWG |
Cable 7
|
CBL-SAST-0616 |
4 |
MINI SAS HD-4 SATA,6G,INT,50CM,50CM SB,30AWG |
Cable 8
|
CBL-SAST-0639 |
4 |
SATA,INT,ROUND,ST-RA,31CM,30AWG |
Cable 9
|
CBL-SAST-0641 |
8 |
SATA,INT,ROUND,ST-RA,45CM,30AWG |
Riser Card
|
RSC-88-F1 |
4 |
LHS Riser Card with PCI-Ex8,RoHS/REACH(F1) |
Riser Card
|
RSC-88-F2 |
4 |
RoHS/REACH LHS 1U PCI-E x8 (F2) |
Heatsink / Retention
|
SNK-P0047PS |
4 |
1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB |
Heatsink / Retention
|
SNK-P0047PSC |
4 |
1U Passive Front CPU Heat Sink w/ a Side Air Channel for X9, X10 Systems Equipped with a Narrow ILM MB |
Notes: - Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|
|
|
|
| |
| |
Part Number |
Qty |
Description |
HDD Bracket |
MCP-240-00134-0N MCP-120-00096-0N MCP-120-00097-0N |
2/node 1/node 1/node |
FIXED 2.5 HDD bracket for add-on-card slot (2 CBL-0734L per node required) Riser card bracket Riser card bracket |
Software |
SFT-OOB-LIC • |
4 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
4 |
DataCenter Management Package (per node license) |
AOC |
AOM-TPM-9655V-S |
- |
Based on AOM-TPM-9655V with Server TXT package,RoHS/REACH |
AOC |
AOM-TPM-9665V-S |
- |
Verical TPM TCG 2.0 Provisioned for server,RoHS/REACH |
Hide Parts List
|
|
|
|