When I have 6 SATA drives connecting on H8DGU-F MB, the Linux OS will detect the SATA port 0 as drive “c” while the SATA port 5 as driver “a”. Is there anyway to make SATA port 0 as drive “a”?
You can change those setting in the BIOS setup page.
1). Go into the BIOS setup page, Advanced / IDE configuration / SATA mode, and change to [AMD_AHCI] mode
2). Go the “SATA IDE Combined” mode, and changed to “Disabled”.
3). Save the BIOS setting by press F10 key and then reboot the system.
Print
Share