Our issue is that we are only able to get eth0 to connect but not eth1. In the bios both interfaces are enabled and the error we get is a media test failure (check cable) which would suggest that eth1 is not plugged in. We have all 20 ports on the pass thru plugged into a switch.
Let me know what you think the problem may be.
You need to have second SBM-GEP-T20 module in order to use Eth1. The first SBM-GEP-T20 module for Eth0 which supports 20 ports and the second SBM-GEP-T20 module are for Eth1. Each SBM-GEP-T20 module only allows one Ethernet line.
Print
Share