Three systems that I successfully tested with all types of IPMI based remote power operations (reset, power cycle, graceful shutdown, …) are now showing a problem when powered up or reset by IPMI.
The systems hang with either one of these three POST Codes: 2B, 70 or 71
I have performed the "clear CMOS", but it did not change the problem.
When the systems are powered up at the front button, no errors occur.
Do you have an idea what might be wrong here? I am at a loss explaining this.
We found that some customers didn’t follow our flash rule to flash BIOS, and some blocks didn’t get flashed.
In the case, post code will show B2, 70 and 71.
Please update IPMI FW first, and then flash the BIOS again.
Print
Share