I still have issue on this. For example I will do the following
1. On Ex 0/1 the default is assigned to vlan 1
2. On Ex 0/24 is also vlan 1 (connect to my management network)
3. On Ex 0/15. The default is vlan 1. I want to change to vlan 100 (for example)
Question :
On Ex 0/1, I will need to assign vlan 1 (default) and vlan 100 on the same port. (Question) how I can do this
1. Everytime I tagged remove Ex0/1 from “untagged Ports” entry and add EX0/1 on “tagged Ports” entry on row VLAN 1.
2. My connection form Ex0/24 got disconnected. Can you let me know what I did wrong?
You can keep EX0/1 and EX0/24 in vlan 1 as untagged port.
Configure vlan 100 to include tagged port EX0/1 and untagged port EX0/15.
On blade #1 NIC, he need to create vlan 100 for traffic to go through EX0/15.
VLAN 1 traffic can be through EX0/24 and EX 0/1 to reach blade 1 NIC.
Print
Share