 |
 |
 |
 | |
 | | SYS-1019GP-TT |
|
| |
 |
| CPU |
- Single Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡
- Support CPU TDP 70-205W
|
| Cores |
|
| Note |
‡
BIOS version 3.2
or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) |
| |
 |
| Supported GPUs |
- 2 Double-Width/Single-Width PCI-E 3.0 x16 Card (Full Height Full Length)
- NVIDIA V100, M10, P40, T4, Quadro RTX
- Supports both active and passive cooled GPUs
- Compatible GPU list
|
| CPU-GPU Interconnect |
- PCI-E Gen 3 x16 Switch CPU-GPU Interconnect
|
| |
 |
| Memory Capacity |
- 6 DIMM slots
- Up to 1.5TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
| Memory Type |
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
| Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.
|
| | |
 | | Chipset |
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| Network Connectivity |
- Intel® X550 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Graphics |
|
| | |
 | | SATA |
|
| LAN |
- 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 2 USB 3.0 ports (rear)
- 2 USB 2.0 ports (rear)
|
| Video |
|
| Serial Port |
|
| DOM |
- 2 DOM (Disk on Module) power connectors
|
| |
 |
| BIOS Type |
|
| |
 |
| Software |
|
| Power Configurations |
- ACPI / APM Power Management
|
| |
 |
| CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
| FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
 |
 | |
 | | Form Factor |
|
| Model |
|
| | |
 | | Height |
|
| Width |
|
| Depth |
|
| Weight |
- Net Weight: 28 lbs (12.70 kg)
- Gross Weight: 36 lbs (16.33 kg)
|
| Available Color |
|
| | |
 | | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LEDs
- System Overheat LED / Fan fail LED
|
| |
 |
| PCI-Express |
- 2 PCI-E 3.0 x16 (FHFL) slots - supporting up to 2 GPUs
- 1 PCI-E 3.0 x16 slot (left riser)
|
| | |
 | | Hot-swap |
- 6 Hot-swap 2.5" SAS/SATA drive bays
|
| M.2 |
- Supports 2 M.2 form factor 2280
- Supports both M.2 NVMe and SATA SSD
|
 | | | |
 | | Fans |
- 8 heavy duty counter-rotating 4cm fans with air shroud and optimal fan speed control
|
| | |
 | |
1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 |
| AC Voltage |
- 1200W: 100-140 V, 14.7-10.5A, 50-60 Hz
- 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
|
| +5V standby |
|
| +12V |
- 100 Amp/115 Vac
- 117 Amp/230 Vac
|
| With Power Distributor |
|
| Certification |
Platinum Certified
|
| | |
 | | RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
 |  |
 |
Voir la liste des pièces
|
 |
 | |
 |
 |
Numéro de pièce
 |
Qté
 |
Description
 |
| Carte mère / Châssis |
MBD-X11SPG-TF
CSE-118GTS-1K43BP2 |
1 1 |
Carte mère Super X11SPG-TF
Châssis SC118G 1U |
|
Fond de panier
|
BPN- SAS -118TQ |
1
|
Fond de panier 1U TQ à 6 ports (avec AMI 9072), prenant en charge jusqu'à 6 disques durs de 2,5 pouces. SAS / SATA HDD / SSD |
|
Câble 1
|
CBL-0484L |
4
|
SATA ,INT,ROND,ST-ST,55CM,30AWG |
|
Câble 2
|
CBL-CDAT-0662 |
2
|
Câble rond CBL, SGPIO, 2x4F vers 2x4F, P2.54, 61,5 cm, 28 AWG |
|
Câble 3
|
CBL-PWEX-0663 |
1
|
PCIe Adaptateur secteur 8 broches mâle (noir) vers CPU 8 broches femelle (blanc), câble de 5 cm, 18 AWG, 9 A/broche, 0 à 80 °C, conforme RoHS/REACH |
|
Câble 4
|
CBL-PWEX-1028 |
1
|
Famille de GPU Tesla, 2x4F/CPU vers 2x4F/CPU, P4.2, 30 cm, 16 AWG, 10 A/broche, -40 à 105 °C |
|
Câble 5
|
CBL-SAST-0624 |
2
|
SATA ,INT,ROND,ST-ST,70CM,30AWG |
|
Carte Riser
|
RSC-R1U-E16R |
1
|
RSC-R1U-E16R |
|
Carte Riser
|
RSC-R1UG-E16-UP |
1
|
Carte d'extension 1U LHS avec un port PCI-E x16 pour carte mère GPU UP |
|
Carte Riser
|
RSC-R1UG-E16R-UP |
1
|
Carte d'extension 1U côté droit avec 1 port PCI-E x16 pour carte mère GPU UP |
|
Dissipateur thermique / rétention
|
SNK-P0067PS |
1
|
Dissipateur thermique passif 1U pour processeur X11 Plateforme Purley équipée d'un mécanisme de rétention étroit |
|
Alimentation
|
PWS-1K43F-1R |
1
|
Alimentation numérique redondante de 1400 W |
|
|
 |
 | |
 | | |
Numéro de pièce |
Qté |
Description |
| Autres câbles pour cartes graphiques |
CBL-PWEX-1059 |
1 |
Processeur graphique Quadro, 2x4F/RA/CPU vers deux (2x3F+2x1F)/ PCIe ,P4.2, 36 cm, 17/20 AWG, 8 A/broche (17 AWG), 6 A/broche (20 AWG), -25 à 80 °C, RoHS |
| AOC-S3008L-L8i (SAS3) |
CBL-SAST-0699 |
2 |
Mini SAS HD-4 SATA , 12G |
| AOC-S3108L-H8IR-16DD (SAS3) |
CBL-SAST-0699 |
2 |
Mini SAS HD-4 SATA , 12G |
| AOC-S3108L-H8IR (SAS3) |
CBL-SAST-0699 |
2 |
Mini SAS HD-4 SATA , 12G |
| Super condensateur pour LSI 3108 |
BKT-BBU-BRACKET-05 BTR-TFM8G-LSICVM02 |
1 1 |
Support de montage pour LSI BBU Supercondensateur LSI |
| Cartes réseau |
AOC-S100G-m2C |
- |
Module PCI-E 3.0 x16 QSFP28 100GbE à 2 ports, profil bas, basé sur le chipset Mellanox ConnectX-4 EN |
| AOC-MCX516A-CCAT |
- |
Mellanox MCX516A-CCAT PCIe Module CX-5 EN. RoHS 2 ports 100 GbE QSFP28 Gen3x16 |
| AOC-S40G-i2Q |
- |
Contrôleur 40GbE double port standard à profil bas avec 2 ports QSFP |
| AOC-MCX512A-ACAT |
- |
Mellanox MCX512A-ACAT PCIe Module CX-5 EN. RoHS à 2 ports 25 GbE SFP28 Gen3x8 |
| AOC-MCX4121A-ACAT |
- |
Mellanox MCX4121A-ACAT Module SFP28 double port 25 GbE, PCIe 3.0 x8, équerre haute Lx EN, HF, RoHS |
| AOC-S25G-b2S |
- |
Contrôleur 25GbE double port à profil bas standard avec 2 ports SFP28, basé sur Broadcom BCM57414 |
| AOC-S25G-m2S |
- |
Adaptateur secteur 25GbE standard à profil bas et 2 ports avec SFP+, basé sur le chipset Mellanox ConnectX-4 LX EN |
| AOC-STG-b4S |
- |
Contrôleur 10GbE quadruple port standard à profil bas avec 4 ports SFP+ |
| AOC-STG-i4S |
- |
Contrôleur 10GbE quadruple port standard à profil bas avec 4 ports SFP+ |
| AOC-STGN-i2S |
- |
Contrôleur 10GbE double port standard à profil bas avec 2 ports SFP+ |
| AOC-STGN-i1S |
- |
Contrôleur 10GbE monoport à profil bas standard avec 1 port SFP+ |
| AOC-STG-i2T |
- |
Contrôleur 10GbE double port standard à profil bas avec 2 ports RJ45 (10GBase-T) |
| AOC-SGP-i4 |
- |
Contrôleur GbE quadruple port standard à profil bas avec 4 ports RJ45 |
| AOC-SGP-i2 |
- |
Contrôleur GbE double port standard à profil bas avec 2 ports RJ45 |
| Kit de ventilation pour GPU |
MCP-310-81806-0B |
- |
Carénage d'air pour GPU Nvidia Fermi 818G/118G |
| Services et assistance mondiaux |
OS4HR3/2/1 OSNBD3/2/1 |
- - |
Service sur site 24h/24 et 7j/7 pendant 3/2/1 an Service NBD sur site 3/2/1 an |
| Logiciel |
SFT-OOB-LIC •  |
1 |
Package de gestion OOB (licence par nœud) |
| Logiciel |
SFT-DCMS-Unique |
1 |
Pack de gestion de centre de données (licence par nœud) |
Liste des pièces masquées
|
|
|
|
|
 |
|
|
|