|
|
|
|
 |
 Caractéristiques principales
• Poste de travail ultra-silencieux
1. Le processeur double socket R3 (LGA 2011) prend en charge
Intel® Xeon® processeur E5-2600
v4 † / famille v3 ; QPI jusqu'à 9,6 GT/s
2. Jusqu'à 2 To † ECC 3DS LRDIMM, jusqu'à
DDR4- 2400 † MHz ; 16 emplacements DIMM
3. 3 ports PCI-E 3.0 x16, 2 ports PCI-E 3.0 x8 et
1 emplacement PCI-E 2.0 x4 (dans x8) prend en charge
Thunderbolt 2.0 AIC
4. Réseau local GbE à double port Intel® i210
5. Audio HD 7.1
6. 8 x 3,5" à échange à chaud SATA HDD Baies
7. Alimentation haute efficacité 1200 W
Niveau Platine (94%)
8. Tour ou rack
|
|
|
|
 |
|
|
|
|
|
| |
 | | SuperWorkstation |
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 160W TDP)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 512GB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
| Network Controllers |
- Intel® i210 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- RealTek ALC888 7.1 High Definition Audio with S/PDIF header
|
| |
|
| SATA |
|
| LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
|
| USB |
- 6 USB 3.0 ports (4 rear + 2 via header)
- 5 USB 2.0 ports (2 rear + 2 via header + 1 Type A)
|
| Audio |
- 7.1 HD Audio with optical S/PDIF
|
| DOM |
- 2 DOM (Disk on Module) power connectors
|
| TPM |
|
| |
|
| PCI-Express |
- 3 PCI-E 3.0 x16 slots
- 2 PCI-E 3.0 x8 slots
- 1 PCI-E 2.0 x4 (in x8) slot supports Thunderbolt 2.0 AIC
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
|
| |
| | Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat / Fan Fail LED
|
| Ports |
|
| | |
| | Hot-swap |
- 8x 3.5" Hot-swap SAS/SATA Drive Trays
|
| Peripheral Bay(s) [90o Rotatable] |
|
| |
| | SAS / SATA Hard Drive Backplane w/AMI MG9072 |
| | |
| | Fans |
- 2x 2800 RPM Fans
- 1x 2700 RPM Fan
|
| |
| | 1200W high-efficiency power supply w/ PMBus |
| AC Input |
- 1000W: 100-114.9 V, 50-60 Hz, 12 Amp
- 1200W: 114.9-240 V, 50-60 Hz, 12-8 Amp
|
DC Output
1000W max
1200W max |
- +3.3V / +5V / +12V / -12V / +5VSB
- 20A / 20A / 83A / 0.3A / 3A
- 20A / 20A / 99A / 0.3A / 3A
|
| Note: |
- Max. continuous combined load on +3.3V and +5V output shall not exceed 120W.
|
| Certification |
  Platinum Certified
|
| |
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN |
- Total of three fan headers supporting up to 8 fans
- Three 4-pin fan headers
- 3 fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|  | |
|
Voir la liste des pièces
|
|
| |
|
|
Numéro de pièce
|
Qté
|
Description
|
| Carte mère / Châssis |
MBD-X10DAi
CSE-743TQ-1200B-SQ |
1
1 |
Carte mère Super X10DAi
Châssis 4U |
| Fond de panier |
CSE- SAS -743TQ |
1 |
743 SAS PLAQUE DE CÔTÉ AVEC AMI MG9072 |
| Câble 1 |
CBL-CDAT-0661 |
2 |
Câble rond CBL, SGPIO, 2x4F vers 2x4F, P2.54, 40 cm, 28 AWG |
| Câble 2 |
CBL-0484L |
8 |
SATA ,INT,ROND,ST-ST,55CM,30AWG |
| Manuel |
MNL-1615-QRG |
1 |
SYS-7048A-T, QRG, HF, RoHS/REACH |
| Parties |
MCP-260-00045-1N |
1 |
Plaque d'E/S de taille standard pour X10DAi avec joint EMI et façade métallique, conforme RoHS/REACH |
| Dissipateur thermique / rétention |
SNK-P0050AP4 |
2 |
Dissipateur thermique actif 4U pour processeur des stations de travail X9 et X10 |
| Alimentation |
PWS-1K25P-PQ |
1 |
PS2 1200W Multi Output Haute Efficacité P |
|
|
|
| |
| | |
Numéro de pièce |
Qté |
Description |
| Rails de montage |
CSE-PT26L-B |
- |
Rails de montage du châssis (noirs) |
| Ventilateur |
FAN-0074L4 |
- |
Ventilateur PWM 4 broches 80x38 mm (central) avec boîtier pour SC743 |
| Plateau de disque dur remplaçable à chaud de 3,5" à 2,5". |
MCP-220-00080-0B |
- |
Adaptateur noir à chaud 3,5" vers 2,5" HDD plateau |
| Carte d'extension |
AOC-TBT-DSL5320 |
1 |
Thunderbolt 2, avec câble d'affichage et GPIO, HF, RoHS/REACH |
Liste des pièces masquées
|
|
|
|
** Remarque : 2 ventilateurs FAN-0074L4 sont nécessaires lors de l'utilisation de processeurs E5-2687w |
|
|
|
