Supermicro Motherboard Xeon Boards X10SDV-7TP4F

8-Core
Broadwell-DE
Dual 10GbE
Embedded
Key Features
     
  1. Intel® Xeon® processor D-1537, Single socket FCBGA 1667; 8-Core, 16 Threads, 35W
  2. Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets
  3. 2 PCI-E 3.0 x8,
    Mini PCI-E (mSATA support),
    M.2 PCI-E 3.0 x4 (SATA support),
    M Key 2242/2280/22110
  4. 2 10G SFP+ and 2 GbE LAN
  5. 4 SATA3 (6Gbps) ports via SoC
  6. 2 USB 3.0 ports (rear), 5 USB 2.0 ports (4 via headers, 1 Type A)
  7. 2 SuperDOM, 1 COM, TPM 2.0 header,
    GPIO and SMbus headers
  8. 12V DC Input and ATX Power Source
  9. 16 SAS2/SATA3 (6Gbps) ports via Broadcom 2116
   
Links & Resources

Specifications
Product SKUs
MBD-X10SDV-7TP4F
  • X10SDV-7TP4F
 
Physical Stats
Form Factor
  • Flex ATX
Dimensions
  • 9.0" x 7.25" (22.86cm x 18.42cm)
 
Processor/Cache
CPU
  • Intel® Xeon® Processor D-1537.
  • Single Socket FCBGA1667 supported, CPU TDP support 35W
Cores / Cache
  • 8 cores, 16 threads / 12MB cache
 
System Memory
Memory Capacity
  • Up to 128GB Registered ECC RDIMM, DDR4-2133MHz
  • Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type
  • 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • System on Chip
SATA
  • SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10
  • RSTe
  • Broadcom® 2116 SW controller for 16 SATA3 (6 Gbps) ports;
  • SAS2 and SATA3
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Dual LAN with 10G SFP+ from D-1500 SoC
    Dual LAN with 1GbE with Intel® I210
    Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics
  • Aspeed AST2400 BMC
 
Input / Output
SATA
  • 4 SATA3 (6Gbps) port
LAN
  • 2 10G SFP+ LAN ports
  • 2 1GbE LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 5 USB 2.0 ports (4 headers, 1 Type A)
  • 2 USB 3.0 ports (2 rear)
Video Output
  • 1 VGA port
Serial Port / Header
  • 1 COM Port (1 header)
TPM
  • 1 TPM Header
Expansion Slots
PCI-E
  • 2 PCI-E 3.0 x8
  • M.2 PCI-E 3.0x4, M Key 2242/2280/22110, Mini-PCI-E with mSATA support
M.2
  • 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280/22110
 
System BIOS
BIOS Type
  • 128Mb SPI Flash with AMI BIOS
BIOS Features
  • PCI 3.0
  • ACPI 5.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • RTC (Real Time Clock) Wakeup
  • SMBIOS 2.8
  • UEFI 2.4
 
Management
Software
  • Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog
Power Configurations
  • ACPI Power Management
  • ATX Power connector
  • +12V DC Power Input
  • Control of power-on for recovery from AC power loss
  • CPU thermal trip support for processor protection
  • M.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL
 
PC Health Monitoring
Voltage
  • +1.8V, +12V, +3.3V, +5V, 1.2V (VDIMM), Chassis intrusion header, HT, Memory, Memory Voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature, VBAT
FAN
  • 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors
Temperature
  • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED
  • CPU / System Overheat LED
Other Features
  • 12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL
 
Operating Environment
Operating Temperature Range
  • 0°C ~ 60°C (32°F ~ 140°F)
Parts List
Parts List (Bulk Package)
Name Part Number Qty Description
Motherboard MBD-X10SDV-7TP4F 1 X10SDV-7TP4F Motherboard
I/O ShieldMCP-260-000980N1X10SDV-TP8F standard 2U I/O Shield
I/O CablesCBL-0044L257.5CM SATA FLAT S-S PBF


Optional Parts List
Name Part Number Qty Description
1U I/O ShieldMCP-260-00099-0N11U I/O Shield for A2SDi-TP8F with EMI Gasket
1U I/O ShieldMCP-260-00100-0B11U I/O Shield for A2SDi-TP8F on SC504/505/510
SAS/SATA CableCBL-SAST-06161MINI SAS HD-4 SATA, INT, 50CM, 50CM SB, 30AWG
Chassis (Optimized for

X10SDV-7TP4F

)
Embedded Compact 1U 2U 3U Mid/Mini-Tower             4U/Tower               
4
SC505-203B
SC514-505
SC515-R407
SC813MTQ-350CB

= Most optimized Chassis for SuperServer Configuration
Blue color = Compatible
Green color = Global SKU & Compatible
Red dot & green color = Optimized + Global SKU


Server (Optimized for X10SDV-7TP4F)
Server Name
SSG-5018D8-AR12L
SYS-5018D-MHR7N4P
X10SDV-7TP4F