A+ Server 4022G-6F
  A+ Products  Systems  Tower  [ 4022G-6F ]








Integrated Board
H8DG6-F




Key Features

1. Dual AMD Opteron™ 6000 series

    processors (Socket G34)

    16/12/8/4-Core ready; HT3.0 Link

    support
2. AMD SR5690 / SP5100 Chipset
3. Up to 512GB DDR3 1600MHz ECC

    Registered DIMM; 16x DIMM sockets
4. 3x PCI-e 2.0 x16 slots, 1x PCIe 2.0 x8

    slot, and 2x PCIe 2.0 x4 (in x8 slots)
5. Dual-port GbE LAN Controller, 8x

    USB 2.0 ports, 1x dedicated LAN for

    system management (IPMI 2.0)
6. 8x Hot-swap SAS/SATA Drive Bays,

    2x 5.25" Peripheral Drive Bays, and

    1x 5.25" Bay that fits 3.5" Devices
7. LSI 2008 SAS2 RAID 0, 1, 10, 5

    (Optional)
8. 920W Platinum Level (94%+)

    High-efficiency Power Supply

    (Optional redundant power

    upgradeable)




Product Review
Available Colors: Black    


 Drivers & Utilities
 BIOS
 IPMI
 Tested MEM
 Tested HDD
 Manuals
 Quick-References
 OS Certification Matrix
 


Product SKUs
AS-4022G-6F
  • A+ Server 4022G-6F (Black)
 
Motherboard
Super H8DG6-F
 
Processor/Chipset
CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • AMD chipset SR5690 / SP5100
 
System Memory
Memory Capacity
  • Sixteen DIMM sockets
  • Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SAS/SATA RAID
  • AMD SP5100 (RAID 0, 1, 10)
  • LSI 2008 SAS2 (RAID 0, 1, 10, 5)
  • (Optional) AOC-SAS2-RAID5-KEY: RAID 5 Support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200eW 16MB DDR2
Super I/O
  • Winbond 83527 chip
  • Winbond WPCM450 (BMC)
 
Expansion Slots
PCI-Express
  • 3/1/2 PCI-E 2.0 x16/x8/x4 (in x8)
 
Input / Output
LAN
  • 2x RJ45 ports and 1x RJ45 Dedicated LAN supports IPMI
USB
  • 8x USB 2.0 ports
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
 
System BIOS
BIOS Type
  • 16Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • Hardware BIOS Virus Protection
  • SMBIOS 2.3
Chassis
Form Factor
  • Tower / 4U Rackmountable
  • Optional Rackmount kit: (CSE-PT26)
Model
 
Dimensions
Height
  • 17.2" (437mm)
Width
  • 7.0" (178mm)
Depth
  • 25.5" (648mm)
Gross Weight
  • 58 lbs (26.3kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off Button
  • System Reset Button
LEDs
  • Power status
  • Hard drive activity
  • 2x Network activity
  • Overheat status
Ports
  • 2x USB
 
Drive Bays
Hot-swap 8x 3.5" SAS / SATA Hot-swap drive bays

SAS or enterprise SATA HDD only recommended
 
SAS / SATA Hard Drive Backplane
SAS/SATA backplane w/ Enclosure Management
System Cooling
Fans 5x 80x38mm 4-pin PWM Fans
 
Power Supply with Power Distributor
920W high-efficiency (94+%) power supply with PMBus
AC Input
  • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
  •   4 Amp @ +5V standby
  •   75 Amp @ +12V
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
Certification Platinum Level Certified94%+    Platinum Certified

  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
  • CPU switching voltage regulator
FAN
  • Total up to 8-fan status tachometer monitoring
  • Status monitor for speed control
  • Stauts monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal Control for 8x Fan Connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
  • UID/Remote LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8DG6-F 1 Super H8DG6-F Motherboard
Chassis CSE-745TQ-920B 1 4U Chassis
Cable 1 CBL-0118L-02 2 MINI SAS-4 SATA,INT,23CM,25.5CM SB,26AWG
Heatsink / Retention SNK-P0043P 2 2U Passive CPU HS for AMD Socket G34
IO Shield 1 MCP-260-00027-0N 1 Std I/O shield for X8, H8, X7SB3 server MB (3rd LAN + 4xLAN)


Optional Parts List
  Part Number Qty Description
Adaptor HDD carrier MCP-220-00080-0B - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray
SATA Power Adapter Cable CBL-0080L - Supermicro 6-Inch SATA Power Adapter Cable
AOC SAS2 RAID5 KEY AOC-SAS2-RAID5-KEY - [NR]L3-25150-02, LSI 2008,16PD,SW RAID KEY
Hide Parts List
Terms & Conditions   |   Privacy   |   Investor Relations   |   Jobs   |   Site Map
SuperServer® | Motherboard | Chassis | Rack Cabinet | SuperBlade® | Embedded | Networking | Storage | Accessories | AMD Solution | Power Supplies
Copyright © 2019 Super Micro Computer, Inc.   
Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.