A+ Server F2014S-RNTR (Complete System Only)

A+ Products Systems FatTwin™ [ F2014S-RNTR ]

Integrated Board
H12SSFR-AN6 Motherboard
Super H12SSFR-AN6

Views: | Angled (node) | Top (node) |
| Angled Front (system) | Rear (system) |

Key Applications
- Hyperscale / Hyperconverged
- HPC and Big Data
- Data Center Enterprise Applications
- Scale Out Storage
- Telco Data Center
- Virtualization Server

Key Features
4 Hot-pluggable System Nodes in a 4U form factor.
Each node supports:
1. Single AMD EPYC™ 7003/7002 Series Processor
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
2. Up to 2TB ECC 3DS LRDIMM,
up to DDR4-3200MHz; 8 DIMM slots
3. Expansion slots: 1 PCI-E 4.0 x16 (LP Riser)
1 PCI-E 4.0 x8 (for Internal RAID AOC)
4. AIOM Network card,
1 dedicated IPMI LAN port
5. 1 VGA, 2 USB 3.0 ports
6. 8 Hot-swap 3.5" drive bays:
   Front 6 SATA (Optional NVMe support),
   Rear 2 SATA/NVMe
M.2 Interface: 4 SATA/PCI-E 4.0 x4
M.2 Form Factor: 2242, 2260, 2280, 22110
M.2 Key: M-Key
7. 2x 8cm 13.5K RPM middle fans
8. 2200W Redundant Power Supplies
Titanium Level (96%)
   (Full redundancy based on
   configuration and application load)

Complete System Only: To maintain quality and integrity, this product is sold only as a completely assembled system (for optimal performance 8 DIMMs is recommended). Minimum requirement is 1 CPU, 4 DIMMs, 1 HDD/NVMe and 1 AIOM/AOC NIC card per node.

Drivers & Utilities BIOS IPMI Tested Memory Tested M.2 List NVMe Options Manuals OS Certification Matrix Drive Options Tested AIOM

Product SKUs
  • A+ Server F2014S-RNTR (Black)

Super H12SSFR-AN6
Processor/Chipset (per Node)
  • Single AMD EPYC™ 7003/7002 Series Processor
    (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
  • Socket SP3
  • Supports CPU TDP / cTDP up to 280W*
  • Up to 64 Cores
Note * Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
System Memory (per Node)
Memory Capacity
  • 8 DIMM slots
  • Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs
  • 8-channel memory bus
Memory Type
  • DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
Memory Sizes
  • 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
  • System on Chip
  • SATA3 (6Gbps)
Network Controllers
  • Flexible networking via AIOM (not included, must add 1 per node)
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Input / Output (per node)
  • Flexible networking via AIOM
  • 1 RJ45 Dedicated IPMI LAN port
  • 2 USB 3.0 ports (rear)
  • 1 VGA port
  • 1 COM port
  • 1 TPM 2.0 header
System BIOS
  • 256Mb SPI Flash EEPROM with AMI BIOS
Power Configurations
  • ACPI Power Management
PC Health Monitoring
  • Monitors for CPU Cores
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Form Factor
  • 4U Rackmount
  • CSE-F424AS3-R2K20BP
Dimensions and Weight
  • 17.63" (448mm)
  • 6.96" (177mm)
  • 29" (737mm)
  • 28.3" (W) x 15.0" (H) x 42.4" (D)
  • Net Weight: 150 lbs (68.04 kg)
  • Gross Weight: 200 lbs (90.71 kg)
Available Colors
  • Black
Front Panel (per node)
  • Power On/Off button
  • UID button
  • Power status LED
  • Hard drive activity LED
  • Network activity LEDs
  • Information LED (UID, Fan failure, Overheat)
Expansion Slots (per node)
  • 1 PCI-E 4.0 x16 (Low-profile riser)
  • 1 PCI-E 4.0 x8 (Internal RAID AOC)
Drive Bays (per node)
  • 8 Hot-swap 3.5" drive bays: Front 6 SATA (optional NVMe support), Rear 2 SATA/NVMe
  • M.2 Interface: 4 SATA/PCI-E 4.0 x4
  • M.2 Form Factor: 2242, 2260, 2280, 22110
  • M.2 Key: M-Key
1 SATA/NVMe backplane
System Cooling (per node)
  • 2x 8cm 13.5K RPM middle fans
Power Supply
2200W Redundant Power Supplies with PMBus
Total Output Power and Input
  • 1200W with Input 100-127Vac
  • 1800W with Input 200-220Vac
  • 1980W with Input 220-230Vac
  • 2090W with Input 230-240Vac
  • 2200W with Input 220-240Vac (for UL/cUL use only)
  • 2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency
  • 50-60Hz
(W x H x L)
  • 76 x 40 x 336 mm
  • Max: 100A / Min: 0A (100-127Vac)
  • Max: 150A / Min: 0A (200-220Vac)
  • Max: 165A / Min: 0A (220-230Vac)
  • Max: 174.17A / Min: 0A (230-240Vac)
  • Max: 183.3A / Min: 0A (220-240Vac)
  • Max: 1A / Min: 0A
Output Type
  • Backplanes (gold finger)
Certification Titanium Level96%   Titanium Level
  [ Test Report ]
Operating Environment
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)

See Parts List

Optional Parts List
Part Number Qty Description
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)
Hide Parts List

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Certain products may not be available in your region