 | |
 | | AS-1020C-3 |
- A+ Server 1020C-3 (Beige)
|
| AS-1020C-3B |
- A+ Server 1020C-3B (Black)
|
| |
| | CPU |
- Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron 200 Series processor(s)
- Single CPU configurations are not recommended
- VRM x3
|
| Chipset |
- nVidia nForce Pro 2200 (CK804)
- AMD 8132
|
| | |
| | Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 400 MHz memory or
- Supports up to 32 GB DDR 333 MHz memory or
- Supports up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | SAS |
- Adaptec AIC-9410W SAS Controller
- 8 SAS Ports (4 Internal, 4 External)
- RAID 0, 1, 10
- Zero-Channel RAID (optional)
|
| IPMI |
- 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B)
- Remote Management Module
- (Card not included)
|
| Network Controllers |
- Two Broadcom BCM5721 Gigabit LAN / Ethernet Controllers
- Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output
|
| Graphics |
|
| Super I/O |
|
| Clock Generator |
|
| | |
| | Serial Attached SCSI |
- Integrated Adaptec AIC-9410W(SAS) Controller
- Two Serial Attached SCSI (SAS) ports (1 internal, 1 external)
- Each SAS port supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
|
| IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy |
|
| LAN |
|
| USB |
- FUCI
- Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 Rear Ports
- 2 Internal Headers
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial port
- 1 header
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| Ports |
|
| | |
| | Hotswap |
- 4 x 3.5" hot-swap SCSI Drive Bays with SAF-TE
|
| | |
| | Floppy |
- 3.5" 1.44MB Slim Floppy Drive
|
| CD-ROM |
|
| | |
| | Full-height / Half-length Slot |
- 64-bit 133MHz PCI-X (riser card pre-preinstalled) OR
- PCI-E x8 (requires optional riser card CSE-RR1U-EL)
|
| Low-profile / Half-length Slot |
- 64-bit 100MHz PCI-X (riser card pre-installed) OR
- PCI-E x8 (requires optional riser card CSE-RR1U-ELP)
- Note: Dual Processors are required for correct PCI-X expansion slot operation
|
| | |
| | 4 x 3.5" SAS HDD Backplane |
| | |
| | Fans |
- 4x 10,200 RPM counter rotating fans
|
| | |
| Cold-swappable 500W AC power supply module with PFC
[ 20-pin, (4-pin, 8-pin = 12V) ] |
| AC Voltage |
- 100 - 240V, 60-50Hz, 10 Amp Max
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
|
| | BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
- 49LF080A BIOS Chip
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0 / 1.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
|
| | |
| | CPU |
- Monitors CPU Core Voltages, +1.5V, +2.5V, +3.3V, +5V, ±12V, HyperTransport Link voltage 1.2V, memory voltage 2.5V, 3.3V Standby, VBAT
|
| FAN |
- Total up to 5-fan status tachometer monitoring
- Up to five 3-pin fan headers
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Header
- Chassis Intrusion Detection
|
|
