 | |
 | | AS-1021M-UR+V |
- A+ Server 1021M-UR+V (Silver)
|
| AS-1021M-UR+B |
- A+ Server 1021M-UR+B (Black)
|
| |
| | CPU |
- Dual 1207-pin Socket F
- Supports up to two Six-Core AMD Opteron 2000 Series (Socket F) processors
- 1 MB Cache
- HT3.0 Link support
|
| Chipset |
|
| | |
| | Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Supports up to 128GB DDR2 800/667/533/400 MHz memory
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- Dual channel memory bus
|
| Memory Type |
- DDR2 800/667/533/400 MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB
|
| Memory Voltage |
|
| | |
| | SATA |
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia Host RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IPMI |
- Intelligent Platform Management Interface v.2.0 (Optional: AOC-SIMSO(+) R 3.00)
- RMM (Remote Management Module)
- (Card not included)
- For dedicated LAN, CBL-0177L must be used on left full-size slot. (Cable not included)
|
| Network Controllers |
- nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| VGA |
- ATI ES1000 Graphics Controller
|
| Super I/O |
|
| | |
| | SATA |
|
| IDE |
- Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy |
- 1 Floppy port; 1.44 MB support
|
| LAN |
|
| USB |
- FUCI
- Up to 6 USB Ports 2.0 Compliant
- 2 Rear Ports
- 4 Internal Headers
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial port
- 1 serial port header
|
| Others |
|
| | |
| | BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
- UID button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| Ports |
- 2x USB & DB9 COM port tray
- (Optional - in place of floppy drive)
|
| | |
| | Left Slots |
- 1 Universal I/O (UIO) Slot
(Full-height / Full-length)
- 1 PCI-express x8 Slot
(Full-height / Full-length)
|
| | |
| | Hot-swap |
- 4 x 3.5" Hot-swap SAS / SATA drive bays
|
| | |
| | 1U SAS / SATA Backplane w/ AMI 9071 chip |
| | |
| | DVD-ROM |
- Slim 8x DVD, 24x CD, DVD-ROM drive
|
| | |
| | Fans |
- 4x 4cm counter-rotating fans
|
| | |
| | 650W AC power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 60-50Hz, 8-4 Amp
|
| +5V standby |
|
| +12V |
|
| With Power Distributor |
- +5V: 25 Amp
- +3.3V: 12 Amp
- -12V: 0.6 Amp
|
| | |
| | CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU 4-Phase-switching voltage reulator
|
| FAN |
- Total up to 8-fan status tachometer monitoring
- Up to two 4-pin and six 3-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
- UID/Remote LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
