A+ Server 4710S-T / 4710S-TB
  A+ Products  Systems   Tower   [ 4710S-T ]








Integrated Board
Super H8SSL-R10


Key Features

1. Single AMD® Opteron™ Support,

    (Dual Core Ready)

    800 MHz HyperTransport Link
2. Up to 4 GB DDR 400/333 SDRAM
3. 6. 1x 64-bit PCI-X 133MHz

    2x 32-bit PCI 33MHz
4. ServerWorks HT1000 Chipset
5. Up to 4x Hot-Swap SATA drive bays

   with SATA RAID 0, 1, 10 Support
6. Dual-port Broadcom BCM5704C Gigabit

    LAN / Ethernet Controller
7. 450W Redundant-Cooling Power Supply


Available Colors: Black     Beige    


 Drivers & Utilities       BIOS       Tested Memory List     


Product SKUs
AS-4710S-T
  • A+ Server 4710S-T (Beige)
AS-4710S-TB
  • A+ Server 4710S-TB (Black)
 
Motherboard


Super H8SSL-R10
 
Processor/Chipset
CPU
  • Single 939-pin ZIF Sockets
  • Supports one Dual-Core AMD Opteron™ 100 Series processor
  • 1MB Cache
  • 4 phase VRM
Chipset
  • HyperTransport Link
  • ServerWorks HT1000 I/O Hub
 
System Memory
Memory Capacity
  • Four 184-pin DIMM sockets
  • Supports up to 4 GB DDR 400/333 MHz memory or
  • Single or Dual (recommended) channel memory
Memory Type
  • DDR 400/333MHz unbuffered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • 4 SATA Ports using ServerWorks HT1000 controller
  • SATA RAID 0, 1, 10
IDE
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA/100
IPMI
Network Controllers
  • Broadcom BCM5704C Dual Gigabit Ethernet Controller
  • Supports 1000BASE-T, RJ45 output
VGA
  • ATI Rage XL 8MB PCI Graphics Controller
  • VGA Port
Super I/O
  • NS PC87427
Clock Generator
  • ICS932S801AG
 
Expansion Slots
PCI-X
  • 1 64-bit 133MHz PCI-X (3.3V) slot
PCI
  • 2 PCI 32-bit, 33MHz expansion slots
 
Input / Output
SATA
  • Up to four SATA devices
  • SATA RAID 0, 1, 10
IDE
  • Single ATA 100 EIDE channels support up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports ATA/100
Floppy
  • 1 Floppy port; 1.44 MB
LAN
  • 2 RJ45 LAN ports
USB
  • 2 USB Rear Ports
  • 2 USB Internal Headers
  • USB 2.0 Compliant, 1.1 Compatible
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial ports
  • 1 Header
Chassis
Form Factor
  • Mid-Tower
Model
  • SC733T-450
 
Dimensions
Height
  • 16.8" (427mm)
Width
  • 7" (178mm)
Depth
  • 20.9" (531mm)
Gross Weight
  • 39 lbs (17.7kg)
Available Colors
  • Beige, Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • Network activity LED
  • System Overheat / Fan Fail LED
Ports
  • 2x USB Ports (2.0 Ready)
 
Drive Bays
Hot-swap
  • • 4 x 3.5" SATA hot-swap drive bays
Peripheral Bay
  • 2x 5.25" Peripheral Drive Bay
  • 1x 3.5" full-height peripheral bay
 
Peripheral Drives
Floppy
  • 3.5" 1.44MB Floppy Drive
 
SATA Backplane
SATA Hard Drive Backplane
 
System Cooling
Fans
  • 1x 12cm exhaust thermal fan
  • 1x 9cm mounted thermal cooling fan
  • 2x 8cm fans (450W power

      supply configuration)
 
Power Supply
450W low-noise AC power supply with redundant cooling feature (with PFC)
AC Voltage
  • 100 - 240V, 50/60Hz, 10 Amp
DC Output
  • 5V + 3.3V ≤ 160W
  • 12V + 5V + 3.3V ≤ 430W
+5V
  • 30.0 Amp
+5V standby
  • 2.0 Amp
+12V
  • 34.0 Amp
-12V
  • 1.0 Amp
+3.3V
  • 30.0 Amp
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +5V, ±12V, 2.5V Standby, 5V Standby, VBAT
  • Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
  • CPU 4-phase Switching Voltage Regulator
  • Supports System Management Utility
FAN
  • Total up to five 3-pin fan headers
  • 5 Fan Status Tachometer monitoring
  • Status Monitor for Speed Control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip support
  • I2C temperature sensing logic
LED
  • CPU / Overheat LED
  • Suspend-state indicator LED
Other Features
  • Chassis Intrusion Header
 
System BIOS
BIOS Type
  • 4Mb Flash EEPROM with AMI® BIOS
  • SST-49LF004B BIOS Chip
BIOS Features
  • Plug and Play (PnP)
  • ACPI 2.0
  • PCI 2.2
  • DMI 2.3
  • BIOS Rescue Hot Keys
  • SMBIOS 2.3
  • USB Legacy support
  • Hardware BIOS Virus Protection
  • RTC (Real Time Clock) Wakeup
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-H8SSL-R10

CSE-733T-450(B)		 1

1		 Super H8SSL-R10 Motherboard

4U SC733T-450 Chassis (B = Black)
Backplane CSE-SATA-733 1 SATA Hard Drive Backplane Without GEM424
Cable(s) CBL-0044L

CBL-0049L

CBL-0051L

CBL-0084

CBL-0140L		 4

1

1

1

1		 2 Ft., Pb-Free SATA Cable

Front Panel Ribbon Cable (16-pin to 16-pin)

18", 10-Pin SATA LED Ribbon Cable

6" Split Converter Cable

80-Wire IDE DVD-ROM Cable
Drive Tray(s) CSE-PT39(B) 4 1" SATA drive tray (B = Black)
Fan(s) FAN-0055

FAN-0060		 1

1		 (12 x 12.5cm) Thermal Fan With Holder

(92mm) 3500 RPM Thermal Fan
Heatsink Components BKT-0004

BKT-0005		 1

1		 AMD CPU Bracket

Retention Mosdule for AMD Heatsink
I/O Shield CSE-PT55L 1 Pb-Free Dual-LAN I/O Shield
Peripheral Drives FPD-PNSC-02 (01) 1 Panasonic 3.5" 1.44MB Floppy Drive (01 = Black)
Power Supply PWS-0045 1 SP450-RP 450W Redundant-Cooling Power Supply
Optional Parts List
  Part Number Qty Description
Heatsink / Retention SNK-P0024AP4 - 4-wire Active 2-pipe CPU Heatsink


**4GB memory modules not fully tested due to limited availability
  Terms & Conditions   |   Privacy   |   Jobs Copyright © 2019 Super Micro Computer, Inc.   
Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Page Viewed:

Certain products may not be available in your region