A+ Server 4040C-8R / 4040C-8RB
  A+ Products  Systems   Tower   [ 4040C-8R / 4040C-8RB ]








Integrated Board
Super H8QC8


Key Features

1. Quad AMD® Opteron™ Support,

    (Dual Core Ready)

    1000 MHz HyperTransport Link
2. Up to 32GB DDR400 SDRAM (or)

    Up to 64GB DDR333 SDRAM (or)

    Up to 64GB DDR266 SDRAM
3. 1 PCI-e x8 Slot,

    1 PCI-e x8 or Hypertransport Slot,

    2 PCI-X 133/100MHz Slots,

    2 PCI-X 100MHz Slots
4. nVidia® nForce Pro 2200 (CK804)

    AMD8132 Chipset
5. 5 x 3.5" Hot-swap SCSI Drive Bays
6. Dual Gigabit (Intel 82546GB)

    Ethernet Controller
7. 1000W Redundant Power Supply


Available Colors: Black     Beige    


 Drivers & Utilities
 BIOS
 Tested MEM
 Manuals
 


Product SKUs
AS-4040C-8R
  • A+ Server 4040C-8R (Beige)
AS-4040C-8RB
  • A+ Server 4040C-8RB (Black)
 
Motherboard
Super H8QC8
 
Processor/Chipset
CPU
  • Quad 940-pin ZIF Sockets
  • Supports four Dual-Core AMD Opteron™ 800 Series processor(s)
  • HyperTransport Link (1000MHz)
  • 8-way option has 2 HyperTransports using PCI-e, extra I/O or Pathscale communication device
  • Only Quad-Processor Configurations Recommended
  • VRM x4
Chipset
  • nVidia nForce Pro 2200 (CK804)
  • AMD 8132 PCI-X Tunnel
 
System Memory
Memory Capacity
  • Four 184-pin DIMM sockets per processor memory bank
  • Four memory banks for 4 processors (Quad).
  • Supports up to 32 GB DDR 400 MHz memory or
  • Supports up to 64 GB DDR 333/266 MHz memory
  • Supports up to 64 GB registered ECC DDR for 4-way option
  • Supports up to 128 GB memory for 8-way option only
  • Single or Dual (recommended) channel memory support
  • Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors

        (using ECC memory)
 
On-Board Devices
SCSI
  • Dual-Channel Ultra320 SCSI
  • Adaptec AIC-7902 Controller
ZCR
  • Supports Supermicro All-In-One Zero Channel RAID card (optional) or
  • RAID 0, 1, 10, JBOD
SATA
  • nVidia nForce Pro 2200 SATA 3.0Gbps Controller
  • 4 SATA Ports
  • nVidia RAID 2.0
  • SATA RAID 0, 1, 0+1 support
Network Controllers
  • Dual Intel 82546GB Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI
Graphics
  • ATI Rage XL 8MB
Super I/O
  • Winbond 83627HF-AW
Clock Generator
  • CK804
 
Input / Output
Serial ATA
  • Integrated SATA 3.0Gbps Controller
  • Four Serial ATA Connectors
  • Four SATA hard drives supported
IDE
  • Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA 100 / 133
LAN
  • 2 RJ45 LAN ports
USB
  • FUCI
  • Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
  • 2 rear ports
  • 1 internal header for 2 ports
VGA
  • 1 VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial port
  • 1 Header
Parallel Ports
  • 1 ECP / EPP parallel port
Chassis
Form Factor
  • Tower / 4U Rackmountable
  • Optional Rackmount Kit (MCP-290-00001-00)
Model
  • SC748S-R1000
 
Dimensions
Height
  • 7.0" (178mm)
Width
  • 17.8" (452mm)
Depth
  • 29.4" (746mm)
Gross Weight
  • 65.5 lbs (29.71kg)
Available Colors
  • Beige, Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat / Fan Fail LED
  • Power Fail LED
Ports
  • 2x USB Ports
 
Drive Bays
Hot-swap
  • 5 x 3.5" SCA Ultra320/160 Hot-swap Drives
Peripheral Bay(s)
  • 3x 5.25" Peripheral Drive Bays
 
Expansion Slots
HyperTransport
  • 1 HyperTransport slot for Pathscale communication device
PCI-Express
  • 2 PCI-e x8 slots (one using x16 slot)
PCI-X
  • 2 64-bit PCI-X 133/100MHz slots
  • 2 64-bit PCI-X 100MHz slots
  • Note: Quad Processors are required for correct PCI-X expansion slot operation
 
SCSI Backplane
U320 SCSI Hard Drive Backplane
 
System Cooling
Fans
  • 3x 5000 RPM Hot-Swappable Cooling Fans
  • 3x 5000 RPM Hot-Swappable Rear Exhaust Fan
 
Power Supply
1000W AC-DC high-efficiency power supply w/ PFC + PDB
AC Voltage
  • 100 - 240V, 50 - 60Hz, 15 - 7Amp
+5V standby
  • 4 Amp
+12V
  • 83 Amp
With Power Distributor
  • +5V: 20 Amp
  • +3.3V: 20 Amp
  • -12V: 0.6 Amp
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, +5V Standby, HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V
  • Up to 8 fan status
  • Supports System Management Utility
FAN
  • Total up to 8-fan status
  • 3-pin fan speed control or
  • 4-pin Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
LED
  • Overheat LED
Other Features
  • Chassis Intrusion Header
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
  • SST49LF080A
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • DMI 2.3
  • ACPI 2.0
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • SMBIOS 2.3
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-H8QC8

CSE-748S-R1000(B)		 1

1		 Super H8QC8 Motherboard

4U SC748S-R1000 Chassis (B = Black)
Backplane CSE-SCA-016 1 SCSI Hard Drive Backplane for CSE-M35S Mobile Rack
Cable(s) CBL-0051L

CBL-0063L

CBL-0084

CBL-0087

CBL-0209L		 1

1

1

1

3		 60cm Round Flopopy Cable

20" U320 SCSI Cable

6" 16-pin Fron Control Split Cable

20" 16-pin to 16-pin Round Ribbon Cable

210mm 4-pin to 3-pin Fan Power Cable
Drive Bay(s) CSE-PT36

CSE-M35S		 2

1		 5.25" Dummy Tray with Rail

5-Drive Disk Array Mobile Rack
Fan(s) FAN-0081

FAN-0090		 3

3		 5000 RPM Rear Cooling Fan

5000 RPM Housing Fan
Heatsink Components BKT-0004

BKT-0005		 4

4		 Heatsink Mounting Plate

Heatsink Retention
I/O Shield CSE-PT55 1 Color I/O Shield with Gasket
Peripheral Drives FPD-PNSC-02 (01) 1 Panasonic 3.5" 1.44MB Floppy Drive (01 = Black)
Power Supply PWS-1K01-1R 2 SP1K0-1R 1000W Redundant Power Module
Air Shroud CSE-PT0125 1 Air Shroud
Optional Parts List
  Part Number Qty Description
Heatsink / Retention SNK-P0013 - Passive Copper Heatsink for 2U Chassis and above

(Please refer to our Thermal Components Matrix)
Mounting Rails MCP-290-00001-00 - SC748 4U Chassis Mounting Rails
  Terms & Conditions   |   Privacy   |   Jobs Copyright © 2019 Super Micro Computer, Inc.   
Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Page Viewed:

Certain products may not be available in your region