|
|
|
|
Integrated Board |
|
|
|
|
|
Key Features
1. Dual AMD Opteron 6000 series
processors (Socket G34)
16/12/8/4-Core ready; HT3.0 Link
support
2. Up to 512GB DDR3 1600MHz ECC
Registered DIMM; 16x DIMM sockets
3. 1x UIO and 1x PCI-e Gen 2.0 x16 slot
4. Dual-port GbE LAN Controller, 4x
USB 2.0 ports, 1x dedicated LAN for
system management (IPMI 2.0)
5. 4x Hot-swap SAS/SATA Drive Bays
6. 700W High-efficiency Redundant
Power Supplies; Gold Certified
|
|
Available Color:
|
Black |
Note:
|
SAS Add-on card is optional / SAS cable included |
|
|
|
|
|
|
| |
| AS-1022G-URF |
- A+ Server 1022G-URF (Black)
|
|
| CPU |
- Dual 1944-pin Socket G34
- Supports up to two 16/12/8/4-Core ready AMD Opteron 6000 Series processors
- HT3.0 Link support
|
|
- 3.2GHz Hyper-Transport (HT3) link
|
Chipset |
- AMD chipset SR5670 / SP5100
|
Note |
- Supports 6000 processors with Max ACP 80W (TDP 115W)
|
| |
| Memory Capacity |
- 16 DIMM sockets
- Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC 1600/1333/1066 SDRAM in 16 DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
Memory Type |
- DDR3 1600/1333/1066 MHz Registered ECC Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA |
|
Super I/O |
|
| |
| 1U |
- 1x UIO and 1x PCI-e 2.0 x16
|
| |
| SATA |
- 6x SATA2.0 (3Gb/s) Ports -> (Additional SATA cable required, please check Optional Parts List as below)
|
LAN |
- 2x RJ45 ports and 1x RJ45 Dedicated LAN supports IPMI
|
USB |
- 7x USB 2.0 ports
- 2x Rear, 4x header, 1x Type A
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 1 Fast UART 16550 serial port
- 1 serial port header
|
Others |
|
| |
| BIOS Type |
- 16Mb Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Package |
|
Available Colors |
|
| |
| Buttons |
- Power On/Off Button
- System Reset Button
- UID Button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
| Hot-swap |
- 4x 3.5" SAS / SATA Hot-swap drive trays
- SAS or enterprise SATA HDD only recommended
|
| |
| DVD-ROM |
|
| |
| 1x 1U SAS / SATA backplane |
| |
| Fans |
- 4x 4cm Counter-rotating PWM fans
|
| |
| 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C |
AC Voltage |
- 700W: 100 - 140 V, 50-60 Hz, 8.5-6 Amp
- 750W: 180 - 240V, 60-50 Hz, 5-3.8 Amp
|
DC Output +5V standby |
|
DC Output +12V |
- 700W: 58 Amp @ 100-140V
- 750W: 62 Amp @ 180-240V
|
With Power Distributor |
- +5V: 25 Amp
- +3.3V: 12 Amp
- -12V: 0.6 Amp
|
Certification |
Gold Certified
|
| |
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU switching voltage regulator
|
FAN |
- Total up to 8-fan status tachometer monitoring
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic
|
LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
- UID/Remote LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
| RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 30°C (50°F to 86°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
|
|
| |
| |
Part Number |
Qty |
Description |
Motherboard |
MBD-H8DGU-F |
1 |
Super H8DGU-F Motherboard |
Chassis |
CSE-815TQ-R700UB |
1 |
1U Chassis |
Adapter 1 |
CDM-USATA-G |
1 |
mini-SATA to USB adapter for slim DVD |
Adapter 2 |
MCP-220-81502-0N |
1 |
Slim SATA DVD mounting kit for SC213,219,813,815,818,819,825,828,829,836,842 |
Cable 1 |
CBL-0188L |
1 |
IPASS TO 4 SATA 64/54/44/34CM, W/ 64CM SB, S. 26AWG |
Cable 2 |
CBL-0210L |
1 |
FDD, DVD, 4 pin power adapter cable, 8cm. 24AWG |
Cable 3 |
CBL-0341L |
1 |
USB 2.0,INT,LCD,DVD,1X4/P2.54 TO 2X5/P2.54,70CM,28/24AWG |
Heatsink / Retention |
SNK-P0042P |
2 |
1U Passive CPU HS for AMD Socket G34 |
Peripheral Drive |
DVM-TEAC-DVD-SBT4 |
1 |
(EOL) BLACK TEAC SLIM DVD ROM SATA DRIVE,HF,RoHS/REACH |
Riser Card |
RSC-R1UU-UE16 |
1 |
RSC-R1UU-UE16 |
|
|
| |
| |
Part Number |
Qty |
Description |
Adaptor HDD carrier |
MCP-220-00043-0N |
- |
Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray |
Add-on Card |
AOC-USAS2-L8IR |
- |
6Gb/s Eight-Port SAS Internal RAID Adapter |
Add-on Card |
AOC-USAS2LP-H8IR |
- |
- |
Fan(s) |
FAN-0086L4 |
- |
1U, 4-pin Counter-rotating PWM Fan |
RAID Adapter |
AOC-S2208L-H8IR |
- |
2128 based SAS/SATA RAID- 8 internal ports/Low profile-PCI-E |
RAID Adapter |
AOC-SAS2LP-H4IR |
- |
2108 based SAS/SATA RAID- 8 internal ports/Low profile-PCI-E |
Cable(s) |
CBL-0157L-01 |
- |
8pin to 8pin cable for SGPIO, 61.5cm, PBF |
Cable(s) |
CBL-0190L |
- |
SATA set of 4-43/33/26/22cm round S-S |
Cable(s) |
CBL-0388L-01 |
- |
- |
Riser Card |
RSC-R1UU-2E8 |
- |
RISER CARD RSC-R1UU-2E8 |
LSI Accessory |
BTR-0018L-0000-LSI |
- |
LSI00161 IBBU07 BATTERY BACKUP FOR SAS2108 |
LSI Accessory |
BTR-0018L-KIT |
- |
LSI iBBU07 extension kit (To Installed at 2.5" HDD Location) |
| Hide Parts List
|
|
|
|
|