|
|
|
|
 |
Key Features
Virtualization
Cloud Computing
High-End Enterprise Server
1. Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)
2. 4TB Registered ECC DDR4 2666MHz SDRAM in 32 DIMMs (7001 Processors)
8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs (Board revision 2.x required + 7002 Processors)
3. Expansion slots:
1 PCI-E 3.0 x16 (FH, 9.5"L) slot,
1 PCI-E 3.0 x8 (LP) slot
[ Details ]
4. Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License
key (SFT-OOB-LIC) included
for OOB BIOS management
5. 2x 10GBase-T LAN ports via Intel® X540
6. Drive Bays:
10 hot-swap 2.5" U.2 NVMe drive bays
7. 1000W Redundant Power Supplies
Titanium Level (96%)
(Full redundancy based on configuration and application load)
|
|
|
Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system (for optimal performance 16 DIMMs & at least 24/32 cores per CPU is recommended). Minimum requirement is 2 CPUs, 4 DIMMs, 1 NVMe HDD drive.
|
|
|
 |
|
|
|
|
|
|
 |
| AS -1123US-TN10RT |
|
| |
|
|
| CPU |
- Dual AMD EPYC™ 7001/7002* series Processors
(* Board revision 2.x required)
- Socket SP3
- Supports CPU cTDP up to 280W**
|
| Cores |
- Up to 32 Cores (Board revision 1.x + 7001 Processors)
- Up to 64 Cores (Board revision 2.x + 7002 Processors)
|
| Chipset |
|
| Note |
** Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
|
| |
|
| Memory Capacity |
- 32 DIMM slots
- Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
- Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
- 8-channel memory bus
|
| Memory Type |
- DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors)
- DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
|
| DIMM Sizes |
- 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*
(* Board revision 2.x required + 7002 Processors)
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2500 BMC
|
| Network Controllers |
|
| VGA |
|
| |
|
| 1U |
- 1 PCI-E 3.0 x16 (FH, 9.5"L) slot
- 1 PCI-E 3.0 x8 (LP) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| M.2 |
- 1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110)
- or 1 M.2 M-Key SATA3 via optional cable CBL-SAST-0639 (2240/2260/2280/22110)
- or 2 Internal M.2 slots via optional cable CBL-SAST-0639 (NVMe 2260 + SATA 2260)
|
| |
|
| NVMe |
|
| LAN |
- 2x 10GbBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 5 USB 3.0 ports (2 rear + 2 front + 1 Type A)
|
| VGA |
- 2 VGA ports (1 rear, 1 onboard)
|
| Others |
- 1 COM port
- 2 SATA DOM power connectors
- TPM 1.2 header
|
| |
|
| BIOS Type |
- AMI 128Mb SPI Flash EEPROM
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 5.1
- USB Keyboard Support
- SMBIOS 3.1.1
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Package |
- 8.19" (H) 23.86" (W) 36.14" (D)
|
| Weight |
- Net Weight: 26 lbs (11.8 kg)
- Gross Weight: 41 lbs (18.6 kg)
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
| |
|
| Hot-swap |
- 10 hot-swap 2.5" U.2 NVMe drive bays
|
|
|
| Fans |
- 8 heavy-duty PWM fans with optimal fan speed control
|
| Air Shroud |
|
| |
| 1000W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7 - 5A / 50-60Hz
- 200-240Vdc / 7 - 5A (for CCC only)
|
| +12V |
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
- Max: 83A / Min: 0A (200-240Vdc)
|
| 12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  Titanium Level
[ Test Report ]
|
| |
|
| CPU |
- Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
- CPU switching voltage regulator
|
| FAN |
- Up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I²C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Motherboard |
MBD-H11DSU-iN |
1 |
Super H11DSU-iN Motherboard |
| Chassis |
CSE-119UTS-R1K02P-N10T |
1 |
1U Chassis |
| HD Backplane |
BPN-SAS3-116A-N10 |
1 |
10-port 1U SAS3 12Gbps Hybrid backplane, support up to 10x 2.5-inch NVMe storage devices, 4 of them are SAS3/SATA3 drives compatible. |
| Cable |
CBL-SAST-0818 |
2 |
OCuLink v. 1.0,INT,PCIe NVMe SSD, 55CM, 34AWG |
| Cable |
CBL-SAST-0819 |
2 |
OCuLink v 1.0,INT,PCIe NVMe SSD, 65CM, 34AWG, RoHS/REACH |
| Cable |
CBL-SAST-0849 |
4 |
MiniSAS HD source to OcuLink v 1.0,INT,PCIe, 57CM,34AWG |
| Cable |
CBL-SAST-0841 |
2 |
MiniSAS HD source to OcuLink v 1.0,INT,PCIe, 76CM,34AWG,RoHS |
| Riser Card |
RSC-R1UW-2E16 |
1 |
1U LHS WIO Riser card with two PCI-E x16 slots |
| Riser Card |
RSC-UMR-8 |
1 |
1U Ultra RHS Riser Card with 1 PCIE/SATA Hybrid M.2 &1 PCIE |
| Add-on Card |
AOC-SLG3-2E4R-P |
1 |
NVMe AOC by 8, HF, RoHS/REACH |
| Add-on Card |
AOC-SLG3-4E4R-P |
1 |
NVMe AOC by 16, HF, RoHS/REACH |
| Add-on Card |
AOC-UR-I2XT |
1 |
1U Ultra Riser based on Intel X540 controller with 2 10Gbase-T ports and 1 internal PCI-E x8 3.0 slot |
| Heat Sink |
SNK-P0062P |
2 |
1U Passive CPU Heat Sink for AMD Socket SP3 Processors |
| Mounting Rail(s) |
MCP-290-00102-0N |
1 |
Outer rail, quick-release type, 25.6 |
| Software |
SFT-OOB-LIC |
1 |
License key for enabling OOB BIOS management |
|
|
|
|
|
Part Number |
Qty |
Description |
| 1U Cable Management Arm |
MCP-290-00165-0N |
1 |
1U Supermicro Cable Management Arm 3rd Gen (optimize for Ultra) |
| 1 Internal M.2 slot (SATA) |
CBL-SAST-0639 |
- |
1U Ultra RHS Riser Card with 1 SATA M.2 (up to 22110) |
2 Internal M.2 slots
(NVMe 2260 + SATA 2260) |
CBL-SAST-0639 |
- |
1U Ultra RHS Riser Card with 1 PCI-E/SATA Hybrid M.2 & 1 PCI-E x8 (up to 2260 for each device) |
| TPM |
AOM-TPM-9655V |
- |
Vertical TPM with Infineon 9655 TCG 1.2 |
| AOM-TPM-9665V |
- |
AOM-TPM-9665V using SLB9665 Chipset supporing TPM2.0,RoHS/REACH |
| Global Services & Support |
OS4HR3/2/1 |
- |
3/2/1-year onsite 24x7x4 service |
| OSNBD3/2/1 |
- |
3/2/1-year onsite NBD service |
| Software |
SFT-DCMS-Single
|
1 |
DataCenter Management Package (per node license) |
|
|
Hide Parts List
|
|
|
|
|
|
