 | |
 | | AS-2021TM-BTRF |
- A+ Server 2021TM-BTRF (Black)
|
| |
| | CPU |
- Support two Six-Core AMD Opteron
2000 Series processors (Socket F)
|
| Chipset |
- NVIDIA MCP55 Pro chipset with up to
2.4GHz Hyper Transport Link support
|
| |
| | Memory Capacity |
- Eight 240-pin DIMM sockets
- Up to 64GB of Reg. ECC DDR2 memory
|
| Memory Type |
- Reg. ECC DDR2 800/667/533/400 MHz
- SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors, detects
double-bit errors (using ECC)
- Supports Chipkill technology
|
| |
| | SATA |
- NVIDIA MCP55 Pro controllers
RAID 0, 1, 5 support
|
| Network Controllers |
- Dual port Gigabit LAN (Zoar) Ethernet
controllers
|
| Graphics |
|
| |
| | PCI-Express |
- PCI-E x16 (low-profile) slot
|
| |
| | SATA |
|
| LAN |
- 2x RJ45 LAN ports
- 1x dedicated LAN port for IPMI 2.0 with Virtual Media over LAN & Dedicated LAN & KVM-over-LAN **
|
| USB |
Total of 4 USB 2.0 Compliant ports
• 2x USB rear ports (stacked)
• 2x USB internal ports (Type A)
|
| VGA |
|
| Serial Ports |
|
| | |
| | Height |
- 3.47" (88mm) / 11.22" (285mm)
|
| Width |
- 17.25" (438mm) / 26.38" (670mm)
|
| Depth |
- 28.5" (724mm) / 39.76" (1010mm)
|
| Gross Weight |
|
| Available Colors |
|
| | |
| | Hot-swap |
- Three 3.5" Hot-swap SATA drives
(support RAID 0, 1, 5)
|
| |
| | 2U Hard drive Backplane |
|
|
| |
| | Form Factor |
|
| Model |
|
| |
|
| Buttons |
|
| LEDs |
- Power status LED
- Hard drive activity LED
- Two Network activity LEDs
- System Overheat LED
|
| | |
| | Fans |
|
| | |
| | Redundant 1200W high-efficiency power supply with PMBus |
| AC Input |
- 1000W Output @ 100-140V, 11.5-8A, 50-60Hz
- 1200W Output @ 180-240V, 8-5.5A, 50-60Hz
|
| DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
|
DC Output
with PDB |
- +5V: 50 Amp
- +3.3V: 30 Amp
- -12V: 0.6 Amp
|
| Certification |
Gold Certified
[ Test Report ]
|
| | |
| | BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- ACPI up to 3.0
- PCI 2.2
- USB Keyboard support
|
| | |
| | CPU |
- Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
| FAN |
- Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors
- PSU I2C temperature sensing logic
|
| LEDs |
- Power LED (on Power button)
- Network activity LED
- System overheat / Fan Fail LED
|
| |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°to 35°C (50°to 95°F)
- Non-operating Temperature:
-40°to 70°C (-40°to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5 to 95% (non-condensing)
|
|
