A+ Server 4042G-TRF
  A+ Products  Systems  Tower   [ 4042G-TRF ]








Integrated Board
Super H8QGi-F
Key Features

1. Four AMD Opteron™ 6000 series

    processors (Socket G34)

    16/12/8/4-Core ready; HT3.0 Link

    support
2. AMD SR5690/SR5670/SP5100 Chipset
3. 5x 3.5" Hot-swap SAS / SATA Drive

    Bays
4. Up to 1TB DDR3 1600MHz ECC

    Registered DIMM; 32x DIMM sockets
5. 2x PCI-e 2.0 x16 slots, 1x PCI-e 2.0

    x8 slots, and 1x UIO or PCI-E x8 slot
6. Intel 82576 dual-port Gigabit Ethernet

    (2x GbE LAN ports) and 1x Dedicated

    LAN for system management (IPMI 2.0)
7. Integrated Matrox G200 Graphics
8. 1400W High-efficiency Gold Level

    Redundant Power Supplies


Available Colors: Black    


 BIOS
 IPMI
 


Product SKUs
AS-4042G-TRF
  • A+ Server 4042G-TRF (Black)
 
Motherboard
Super H8QGi-F
 
Processor/Chipset
CPU
  • Quad 1944-pin Socket G34
  • Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • AMD SR5690/SR5670/SP5100 Chipset
 
System Memory
Memory Capacity
  • 32 DIMM sockets
  • Support up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
  • Quad channel memory bus
  • For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port

      Gigabit Ethernet
  • 10/100/1000BASE-T support
Super I/O
  • Winbond® W83527 chip
VGA
  • Matrox G200 16MB DDR2 graphics
 
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2x Rear, 4x internal header, and 1x type A
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
VGA
  • 1 VGA port
Chassis
 
Form Factor
  • Tower / 4U Rackmountable
Model
 
Dimensions
Height
  • 7.0" (178mm)
Width
  • 17.8" (452mm)
Depth
  • 28.4" (721mm)
Gross Weight
  • 87 lbs (39.5 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power Fail LED
Ports
  • 2x USB Ports
 
Drive Bays
Hot-swap
  • 5x 3.5" Hot-swap SAS/SATA Drive Bays
  • SAS or enterprise SATA HDD only recommended
Peripheral Bay(s)
  • 2x 5.25" Peripheral Drive Bay
  • 1x 5.25" Bay For Floppy Drive
 
Expansion Slots
PCI-Express
  • 2x PCI-e 2.0 x16
  • 1x PCI-e 2.0 x8
  • 1x UIO slot or 1x PCI-e 2.0 x8
 
SAS / SATA Backplane
SAS / SATA Hard Drive Backplane with SES2
 
System Cooling
Fans
  • 3x 8200 RPM Hot-Swappable Cooling Fans
  • 3x 8200 RPM Hot-Swappable Rear Exhaust Fan
Shrouds
  • 1x Air Shroud
 
Power Supply
Redundant 1400W high-efficiency power supply with PMBus
AC Input
  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output

+5V standby
  • 6 Amp
DC Output

+12V
  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 25 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified

  Gold Certified

  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
  • CPU 4-Phase-switching voltage reulator
FAN
  • Total up to 9-fan status tachometer monitoring
  • Up to nine 3-pin fan headers
  • Status monitor for speed control
  • Support 3-pin fans with fan-speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • PC Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
  • SST 49LF080A BIOS Chip
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8QGi-F 1 Super H8QGi-F Motherboard
Chassis CSE-748TQ-R1400B 1 4U Chassis
Air Shroud MCP-310-74802-0B 1 Mylar air shroud for H8QGi/6-F and H8QMi/3-2
Cable 1 CBL-0157L-01 2 CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,60CM,28AWG
Cable 2 CBL-0206L 5 SATA,INT,ROUND,ST-ST,48CM,26AWG
Heatsink / Retention SNK-P0043P 4 2U Passive CPU HS for AMD Socket G34
IO Shield 1 MCP-260-00027-0N 1 Std I/O shield for X8, H8, X7SB3 server MB (3rd LAN + 4xLAN)


Optional Parts List
  Part Number Qty Description
Adaptor HDD carrier MCP-220-00080-0B - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray
Cable(s) CBL-0390L - 20-pin PWS to Two 6+2pin GPU PWS
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Certain products may not be available in your region