 | |
 | | AS-2122TC-DL6RF4 |
|
| |
| | CPU |
- Dual 1207-pin Socket C32
- Supports two 8/6/4-Core ready AMD Opteron 4000 Series processors
- HT3.0 Link support
|
| Chipset |
- AMD chipset SR5670 + SP5100
|
| Note |
- Supports 4000 series processors with Max ACP 75W (TDP 95W)
|
| | |
| | Memory Capacity |
- 12 DIMM sockets
- Support up to 192GB Registered ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs
- Dual channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
| SAS |
- LSI 6Gbps SAS 2008 IT Mode
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® I350 Quad Gigabit Ethernet LAN controller
- 10/100/1000BASE-T support
|
| VGA |
|
| Super I/O |
|
| | |
| | PCI-E |
- 1x PCI-E 2.0 x16, 1x PCI-E 2.0 x8 in x4 (for SAS adapter card support)
|
| | |
| | SATA |
|
| SAS |
- Integrated LSI 2008 IT Mode SAS2 RAID Controller
|
| LAN |
- 4 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB |
- 4x USB 2.0 ports
- 2x Rear, 1x header (2 ports)
|
| VGA |
|
| Serial Ports |
- 1x Fast UART 16550 serial port
|
| | |
| | BIOS Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- 4x Power On/Off button
- 4x UID button
|
| LEDs |
- 4x Power status LED
- 4x UID LED
- 4x Network activity LEDs
- 4x System overheat / fan failed /
power failed LED
|
| |
| | HDD Bay |
- 24x Hot-swap 2.5" HDD
(12 for each node)
|
| |
| | Fans |
|
| | |
| | 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| AC Input |
- 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
|
| DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
|
| Certification |
 
Platinum Certified
[ Test Report ]
|
| | |
| | CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN |
- Up to 4-fan status tachometer monitoring
- Up to four 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 30°C (50°F to 86°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
