|
|
|
| |
| SYS-7048R-TRT |
- SuperServer 7048R-TRT (Black)
|
Recommended Replacement |
|
|
|
CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
|
|
Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 512 ECC RDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM:
32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
|
Chipset |
|
SATA |
- SATA 3.0 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Video |
|
|
|
SATA |
- 8x SATA3 (6Gbps) ports
- 2x SATA3 powered ports that support SATA DOM
|
LAN |
- 2x RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- Rear USB: 2x USB 3.0 + 2x USB 2.0
- Front USB: 2x USB 2.0
- USB Header: 2x 3.0, 2x 2.0, 1x Type A
|
Video |
|
Serial Port / Header |
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
|
Software |
|
Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
|
| |
| Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit
|
Model |
|
| |
| Height |
|
Width |
|
Depth |
|
Package |
- 24" (H) x 14" (W) x 26.5" (D)
|
Weight |
- Net Weight: 56 lbs (25.6 kg)
- Gross Weight: 73.5 lbs (33.6 kg)
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
Ports |
|
|
|
PCI-Express |
- 3x PCI-E 3.0 x16 (Full-height, Full-length)
- 3x PCI-E 3.0 x8 (Full-height, Full-length)
|
| |
| Hot-swap |
- 8x 3.5" Hot-swap SAS/SATA Drive Trays
|
Peripheral Bay(s) [90o Rotatable] |
- 2x 5.25" Peripheral Drive Bays
- 1x 5.25" Bay that fits 3.5" bay devices
|
|
| SAS / SATA Hard Drive Backplane w/AMI MG9072 |
| |
| Fans |
- 3x 8cm hot-swap redundant PWM cooling fans
- 2x 8cm hot-swap exhaust Fans and air shroud
|
| |
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
Certification |
Platinum Certified [ Test Report ]
|
|
|
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
FAN |
- Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
| RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X10DRi-T
CSE-745TQ-R920B |
1 1 |
Super X10DRi-T Motherboard
4U Chassis |
Air Shroud |
MCP-310-74501-0B |
1 |
SC745 Air Shroud For System with 10G,HF,RoHS/REACH |
Backplane |
CSE-SAS-743TQ |
1 |
743 SAS BACKPLANE W/AMI MG9072 |
Cable 1 |
CBL-0473L |
8 |
SATA,INT,ROUND,ST-ST,21CM,30AWG |
Cable 2 |
CBL-CDAT-0661 |
2 |
CBL,SGPIO,2X4F TO 2X4F,P2.54,ROUND CABLE,40CM,28AWG |
Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
Manual |
MNL-1573-QRG |
1 |
SYS-7048R-TR/SYS-7048R-TRT, QRG,HF,RoHS/REACH,PBF |
Parts |
MCP-260-00042-0N |
1 |
STD I/O shield for X9 socket R server MB with Gasket. |
Heatsink / Retention |
SNK-P0048PS |
2 |
2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB |
Power Supply |
PWS-920P-1R |
2 |
1U REDUNDANT 920W PMBus 94% EFFICIENCY |
|
|
|
| |
| |
Part Number |
Qty |
Description |
Storage Controller Card(s) & Cables(s) |
AOC-S3008L-L8i & 2x CBL-SAST-0699
AOC-S3008L-L8e & 2x CBL-SAST-0699
AOC-S3108L-H8IR & 2x CBL-SAST-0699
AOC-S3108L-H8IR-16DD & 2x CBL-SAST-0699
|
- |
Standard LP, 8 internal ports (12Gb/s) Gen-3, 63HDD; RAID 0, 1, 10
Standard LP, 8 internal ports (12Gb/s) Gen-3, 122HDD; HBA
Standard LP, 8 internal ports (12Gb/s) 8x Gen3; RAID 0, 1, 5, 6, 10, 50, 60
Standard LP, 8 internal ports (12Gb/s) Gen-3, 16HDD; RAID 0, 1, 5, 6, 10, 50, 60
|
Mounting Rails |
CSE-PT26L-B |
1 |
4U Chassis Rail Kits SC743,745 (w/ 2pcs Black Chassis Ears) |
Cable 1 |
CBL-0178L |
- |
SATA,INT,FLAT,48CM,26AWG |
Cable 2 |
CBL-0080L |
- |
big 4 pin to SATA POWER ADAPTER CABLE 6 |
Peripheral Drive 1 |
DVM-LITE-DVDRW24-HBT1 |
- |
BLACK LITE-ON 5.25" HH 24X DVD-RW SATA DRIVE PBF |
Global Services & Support |
OS4HR3/2/1 OSNBD3/2/1 |
- - |
3/2/1-year onsite 24x7x4 service 3/2/1-year onsite NBD service |
Software |
SFT-OOB-LIC • |
1 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|