 |
 |
MBD-X11SAN |
|
|
 |
Form Factor |
|
Dimensions |
-
5.7" x 4.0" (14.6cm x 10.16cm)
|
|
 |
CPU |
-
Intel® Pentium™ Processor N4200.
- Single Socket FCBGA1296 supported, CPU TDP support 6W
|
|
 |
Memory Capacity |
-
Up to 8GB Unbuffered non-ECC SO-DIMM, DDR3-1866MHz, in 1 DIMM slot
|
Memory Type |
|
DIMM Sizes |
|
Memory Voltage |
|
|
 |
Chipset |
|
SATA |
-
SoC controller for 1 SATA3 (6 Gbps) ports;
|
Network Controllers |
-
Dual LAN with Intel® Ethernet Controller I210-AT
|
Audio |
|
Graphics |
|
|
 |
SATA |
|
LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
|
USB |
- 4 USB 2.0 ports (4 headers),
- 2 USB 3.0 ports (2 rear),
- 1 USB 3.1 ports
|
Video Output |
- 1 VGA port, 1 48-bit LVDS port, 1 HDMI port
|
Serial Port / Header |
- 4 COM Ports (4 headers), (2 RS232, 2 RS232/422/485, RS-485 supports Auto flow control)
|
TPM |
|
Others |
- 1 HD Audio header (Mic-in/headphone-Out)(Audio only support at 0~60C)
-
1 8-bit GPIO header
-
1 SMBus header
-
1 Panel backlight power header
-
1 Speaker
-
1 system Fan
|
|
 |
 |
PCI-E |
-
1 Full size Mini-PCI-E (USB2.0 1,PCI-E Gen2 x 1)
-
1 M.2 2280 B-Key (PCI-E Gen2 x 1,SATA x 1)
|
M.2 |
- M.2 Interface: SATA and PCI-E 2.0 x1 and USB 2.0
- Form Factor: 2280
- Key: B-Key
|
|
 |
BIOS Type |
|
BIOS Features |
-
Plug and Play (PnP)
- DMI 2.3
- ACPI 5.0
- SMBIOS 2.7.1
- UEFI 2.4
|
|
 |
Software |
|
Power Configurations |
- +12V DC Power Input
- ACPI Power Management
- Control of power-on for recovery from AC power loss
- Force Power On by Jumper
|
|
 |
Voltage |
- +1.35V, +12V, +3.3V, +5V, 3.3V standby, System level control, System temperature, VBAT, VCGI
|
FAN |
- 1x 4-pin fan header (up to 1 fan), Fan speed control, Low noise fan speed control, PWM fan speed control, System level control, Thermal control tachometer fan connectors
|
Temperature |
|
LED |
|
Other Features |
-
4-pin 12v DC power connector, ACPI power management, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M.2 NGFF connector, RoHS, System level control, WOL
|
|
 |
Operating Temperature Range |
-
0°C ~ 60°C (32°F ~ 140°F)
|
Non-Operating Temperature Range |
-
-40°C - 85°C (-40°F - 185°F)
|
Operating Relative Humidity Range |
-
8% - 90% (non-condensing)
|
Non-Operating Relative Humidity Range |
-
10% ~ 95% (non-condensing)
|
|