Networking Solutions [ 25G White Paper | 25G Press Release | 25G ToR Switch | 100G ToR Switch | 25G NIC Solutions ]

Networking Switches

25GbE/10GbE Ethernet Top of Rack Switch - SSE-F3548S Data center networks are shifting from 10Gbps to 25Gbps at the access (leaf) level to take advantage of the extremely attractive cost advantages of 25Gbps technology. The technology advances in compute and storage are driving innovations in application architectures. Those newer applications demand higher network throughput and lower latency – enabling shorter times for job completion. 25Gbps Ethernet switches also offer backward capability with 10Gbps – thus enabling a seamless data center network migration. Often the cables used in 10Gbps deployment can be reused for 25Gbps. 25Gbps offers highly competitive price to performance ratio when compared to 10Gbps or even 40Gbps. Supermicro offers a data-center-optimized cost-effective 25GbE/10GbE Ethernet switch - the SSE-F3548S, and its companion reverse-airflow model, the SSE-F3548SR. SSE-F3548S / SSE-F3548SR (54 ports) NEW • 48x twenty-five Gigabit Ethernet ports • 6x hundred-Gigabit Ethernet ports • Switching Capacity: 3.6 Tb • RJ-45 (for console cable) • RJ-45 1G Ethernet Management Port • USB • 1:1 Non-blocking connectivity • 1U form factor for flexible installation • CLI and Web GUI Management Interfaces

Supermicro Intel® Omni-Path 100Gbps 48-port Switch - 1U 48-port top-of-rack network switch supports the 100Gbps Intel® Omni-Path Architecture (OPA) Supermicro SSH-C48Q 1U 48-port top-of-rack network switch support the 100Gbps Intel® Omni-Path Architecture (OPA) providing a unique HPC cluster solution offering excellent bandwidth, latency and message rate that is highly scalable and easily serviceable. SSH-C48Q 48-port 100Gbps supporting Omni-Path Architecture leverages the Intel Scalable System Framework (SSF) to address evolving demands across high performance data analytics, machine learning, visualization, traditional modeling and simulation workloads. Designed specifically for HPC, the 48-port SSH-C48Q offers 9.6 Tb/s total fabric bandwidth. High scalability with the capability of 27,648 nodes in 2-tier configuration. Supermicro SSH-C48Q is designed to overcome the scaling challenges of large-sized clusters. The enhancements include: High Message Rate Throughput. SSH-C48Q is designed to support high message rate traffic from each node through the fabric. With ever-increasing processing power and core counts in Intel® Xeon® and Intel® Xeon Phi™ processors, that means the fabric has to support high bandwidth as well as high message rate throughput. 48-port Switch ASIC. SSH-C48Q 48-port design provides for improved fabric scalability, reduced latency, increased density, and reduced cost and power. SSH-C48Q offers 9.6 Tb/s total fabric bandwidth. High scalability with the capability of 27,648 nodes in 2-tier configuration. Deterministic Latency. Features in Intel OPA will help minimize the negative performance impacts of large Maximum Transfer Units (MTUs) on small messages and help maintain consistent latency for interprocess communication (IPC) messages, such as Message Passing Interface (MPI) messages, when large messages-typically storage-are being simultaneously transmitted in the fabric. This will allow Intel OPA to bypass lower priority large packets to allow higher priority small packets, creating a low and more predictable latency through the fabric. Enhanced End-to-End Reliability. Supermicro SSH-C48Q supporting Intel Omni-Path Architecture will also deliver efficient detection and error correction, which is expected to be much more efficient then forward error correction (FEC) defined in the InfiniBand standard. Enhancements include zero load for detection, and if a correction is required, packets only need to be retransmitted from the last link-not all the way from the sending node-which enables near zero additional latency for a correction. SSH-C48Q / SSH-C48QM (48 ports) • 48x 100 Gb/s ports - QSFP28 • RJ45 1G optional management port • Switching Capacity: 9.6 Tb/s • Capability of 27,648 nodes in 2-tier configuration • 1U form factor for flexible installation • Redundant hot-pluggable 750W power supplies

Supermicro offers the latest in cost-effective Top-of-Rack Ethernet switching technology, whether it be traditional fully-featured models incorporating both hardware and software in a complete solution, or bare metal hardware capable of running third-party software configurable to specific customer needs in an Open Network Environment. Supermicro Advanced SDN Capable Switching - Superior Performance in 1U Top-of-Rack Supermicro embraces the Open Networking arena with its line of "bare metal" Ethernet switches. Open Networking provides customers with the ability to maximize the efficient and flexible use of valuable data center resources while providing an ideal platform for managing and maintaining those resources in a manner in tune with the needs of the organization. Customers can select the "best of breed" hardware to match with their Operating System of choice. Offering forty-eight 1Gbps RJ45 Ethernet ports and four 10Gbps SFP+ uplinks, the SSE-G3648B switch allows connectivity at 1Gbps to servers while aggregating traffic for high speed connection to high-bandwidth servers, to routers, and/or to other backbone network switches. The compact 1U form factor gives users the ability to optimize deployment in standalone or top-of-rack environments. The included pair of mounting flanges facilitates rack-mounting installation. And a reverse-airflow model, the SSE-G3648BR, is available for use in large data centers with alternating hot and cold equipment aisles. These switches are ideal for deployment in Data Center, Cloud and Enterprise environments with the capability of handling access for the most demanding applications. SSE-G3648B / SSE-G3648BR (52 ports) • 48x One-Gigabit Ethernet ports (RJ45) • 4x Ten-Gigabit Ethernet ports (SFP+) • Wire-speed Layer 3 Routing • 1:1 Non-blocking connectivity • 1U form factor for flexible installation • Data-Center friendly - regular and reverse airflow models • Hot-pluggable power supplies - Optional Redundancy • Bare metal - ONIE Installed • Cumulus Linux Capable • Now available with Supermicro Switch Software - SFT-SMCPL1G   For higher performance the SSE-X3648S extends the product line - providing forty-eight 10-Gigabit Ethernet ports, thus allowing connectivity to 10GEservers, routers, and backbones. It also offers six ports operating at 40Gbps for access to high-speed backbone networks or storage servers. Also featuring a 1U form factor, an included rail kit, and a reverse-airflow model (the SSE-X3648SR), this switch is ideal for use in large data centers with alternating hot and cold equipment aisles. These switches are ideal for deployment in Data Center, Cloud and Enterprise environments with the capability of handling access for the most demanding applications. SSE-X3648S / SSE-X3648SR (54 ports) • 48x Ten-Gigabit Ethernet ports • 6x Forty-Gigabit Ethernet ports • Switching Capacity: 1284Gbps • Wire-speed Layer 3 Routing • 1:1 Non-blocking connectivity • 1U form factor for flexible installation • Redundant hot-pluggable power supplies • Bare metal • Cumulus Linux Capable   At the top of the Supermicro bare metal switch line is the powerful SSE-C3632S. With thirty-two Ethernet ports that can be configured at either 40Gbps or 100Gbps, this switch enables a robust layer-3 IP fabric for flexible layer-2 overlay in an optimized Ethernet architecture. For modern scale-out, leaf-and-spine data center network deployments, it is well-suited to provide the high-speed spine layer, giving scalable bi-sectional fabric bandwidth for leaf layer switches like the SSE-X3648S or even the SSE-G3648B. The ability to configure the physical Ethernet QSFP28 as either 40Gbps or 100Gbps port, gives optimum flexibility in high-speed physical connectivity between the spine and leaf layers in the data center Ethernet fabric. This switch also comes in a 1U form factor with an included rail kit and is available in a reverse-airflow model, the SSE-C3632SR. SSE-C3632S / SSE-C3632SR (32 ports) • 32x One-Hundred-Gigabit Ethernet ports     (Each optionally configured for forty-gigabit or 4x twenty-five gigabit) • Wire-speed Layer 3 Routing • 1:1 Non-blocking connectivity • 1U form factor for flexible installation • Data-Center friendly - regular and reverse airflow models • Redundant hot-pluggable power supplies • Bare metal - ONIE Installed • Cumulus Linux Capable   Pre-loaded with the Open Network Install Environment (ONIE), all three of these "bare metal" switches are ready for your networking operating system of choice. Supermicro recommends the use of Cumulus Linux - these switches are all listed on the Hardware Compatibility List of Cumulus Networks. Cumulus Linux is an OS for open networking incorporating a true Linux distribution with extensive networking features plus hardware acceleration of routing and switching functions. By using many of the same tools employed for servers, Cumulus Linux enables affordable scalability with clear CapEx savings and even greater OpEx savings; it unleashes rapid innovation via custom, open source or commercial Linux tools and applications. The embedded X86 Linux-based controller is particularly well suited for running the provisioning tools which are typically used for servers. Contact Cumulus Networks (www.cumulusnetworks.com) for more details and ordering information.

Layer 3 Ethernet Switches [ Quick Reference Guide ] Enterprise-Class Performance with Advanced switching capabilities in a 1U form factor. Highly cost-effective 1/10-Gigabit, 10-Gigabit Ethernet and 10/40-Gigabit Ethernet Networking - Standalone or Top-of-Rack. The Supermicro 1/10-Gigabit Layer 3 Ethernet Switches offer aggregation of 24 or 48 ports of 10/100/1000 BASE-T Gigabit Ethernet onto up to four 10-Gigabit Ethernet uplinks. This allows connectivity to 10GE routers, servers, backbones, and data centers. In addition, the 10-Gigabit models provide top-of-rack data-center friendly interconnection for high-speed server and storage systems as well as access to corporate or data center backbone networks. And the latest series of 25/100 Gigabit Ethernet switches take data center networking to a new level of performance by providing even higher-speed connectivity between high-capacity servers and backbone networks at a very compelling price point. The 1U form factor gives users the ability to optimize deployment in wiring closet or top-of-rack environments. A comprehensive routing and protocol software suite ensures optimal performance in even the most demanding enterprise-class networking environments. It is ideal for organizations with growing and consolidated data centers. Supermicro Blade server customers will further appreciate the common set of features and a management interface that matches those of the Supermicro 1/10G Layer 3 Ethernet Switch for the Blade. SSE-X3348S / SSE-X3348SR (54 ports) • 48x ten-Gigabit Ethernet ports • 4x forty-Gigabit Ethernet ports • 2x one-Gigabit Ethernet ports • Switching Capacity: 1284Gbps • Wire-speed Layer 3 Routing • 1:1 Non-blocking connectivity • Link Aggregation and Jumbo Frame Support • 1U form factor for flexible installation • CLI and Web GUI Management Interfaces   SSE-X3348T / SSE-X3348TR (54 ports) • 48x ten-Gigabit Ethernet ports (RJ45) • 4x forty-Gigabit Ethernet ports • 2x one-Gigabit Ethernet ports • Switching Capacity: 1284Gbps • Wire-speed Layer 3 Routing • 1:1 Non-blocking connectivity • 1U form factor for flexible installation • Redundant hot-pluggable power supplies • CLI and Web GUI Management Interfaces

Networking Adapters [ top ]

With outstanding performance, high power efficiency and excellent value, Supermicro's network adapters can help improve network throughput and application performance through features that maximize bandwidth and offload CPU resources. From Gb, 10Gb, 25Gb Ethernet, InfiniBand and also Omni-Path and Fibre Channel technologies, dual-port and quad-port connectivity, in SIOM, MicroLP and standard form factors, Supermicro's network adapters are optimized for the most demanding multi-core computing systems.   Networking AOC Compatibility Matrices - | Standard | MicroLP | TwinPro | UIO | Ultra | SIOM |   Networking Cables and Transceivers Compatibility Table - | See Table |   Adapter SKUs - Display All By Type |  FC  |  GbE  |  10GbE  |  25GbE  |  100GbE  |  IB  |  Omni-Path  | By Form Factor |  AIOM  |  SIOM  |  UIO  | MicroLP  | Standard  | AOC-MTG-b2T • Super I/O Module (SIOM) Form Factor • Port: Dual RJ45 Connectors • Speed: 10Gbps • Controller: Broadcom® BCM57416 10GbE controller   AOC-MTGN-i2S • Super I/O Module (SIOM) Form Factor • Port: 2 SFP+ connectors • Speed: 10Gbps • Controller: Intel® 82599ES 10GbE controller   AOC-MTG-i2T • Super I/O Module (SIOM) Form Factor • Port: Dual RJ45 Connectors • Speed: 10Gbps • Controller: Intel® X550 10GbE controller   AOC-MTG-i4S • Super I/O Module (SIOM) Form Factor • Port: 4 SFP+ connectors • Speed: 10Gbps • Controller: Intel® XL710-BM2 controller   AOC-MTG-i4T • Super I/O Module (SIOM) Form Factor • Port: Quad RJ45 Connectors • Speed: 10Gbps • Controller: Intel® X550 10GbE controller   AOC-CTGS-i2T • MicroLP 10 GbE LAN card • Interface: PCI-E 3.0 x4 • Port: 2 RJ45 ports • Speed: 10Gbps • Controller: Intel® X550   AOC-PTG-i1S • Proprietary 1U Single-Port 10GbE Ethernet Card • Interface: PCI-E 2.0 x8 • Port: 1 SFP+ connector • Speed: 10Gbps • Controller: Intel® 82599EN   AOC-STG-b2T • 10G Base-T Ethernet Adapter supporting Broadcom NetXtreme E-Series • Standard Low-Profile form factor • Interface: 1 PCI-E 3.0 x8 • Port: 2x 10GBase-T ports • Speed: 10Gbps per port • Controller: Broadcom® BCM57416   AOC-STG-b4S • Standard Low-profile 10GbE LAN card • Interface: PCI-E 3.0 x8 (8GT/s) • Port: 4 SPF+ ports • Speed: 10Gbps • Controller: Broadcom® BCM57840S   AOC-CTG-i2T • 2U MicroLP 10 GbE LAN card • Interface: PCI-E 2.1 x8 • Port: 4 RJ45 ports • Speed: 10Gbps • Controller: Intel® X540   AOC-CTG-i2S • MicroLP 10 GbE LAN card • Interface: PCI-E 2.0 x8 (5GT/s) • Port: 2 SFP+ connectors and 2 USB 2.0 ports • Speed: 10Gbps • Controller: Intel® 82599ES   AOC-CTG-i1S • MicroLP 10 GbE LAN card • Interface: PCI-E 2.0 x8 (5GT/s) • Port: 1 SFP+ connector and 2 USB 2.0 ports • Speed: 10Gbps • Controller: Intel® 82599EN   AOC-E10GSFPSR • SFP+ Transceiver 1000Base-SX/10GBase-SR plug-in module • Cabling Type: MMF 62.5/50µm • Products Supported: 10Gb Ethernet Controller with SFP+