| |
| SYS-5018D-MF |
- SuperServer 5018D-MF (Black)
|
|
|
CPU |
- Intel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors
- Socket H3 (LGA 1150)
|
|
|
Memory Capacity |
- 4x 240-pin DDR3 DIMM slots
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
SATA |
- SATA3 (6Gbps) w/ RAID 0, 1
- SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 with 10/100/1000Mbps
|
Network Controllers |
- Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA |
|
|
|
Serial ATA |
- 2x SATA3 (6Gbps) ports
- 4x SATA2 (3Gbps) ports
- SATA DOM Power Connector
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 6x USB 2.0 ports (4 rear, 2 via header)
- 2x USB 3.0 ports (1 Type-A, 1 via header)
|
VGA |
|
Serial Port / Header |
- 1x Fast UART 16550 serial port
- 1x internal header
|
|
|
Voltage |
- Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Height |
|
Width |
|
Depth |
|
Weight |
- Gross Weight: 16.2 lbs (7.4 kg)
- Net Weight: 12 lbs (5.3 kg)
|
Available Colors |
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
|
|
PCI-Express |
- 1x PCI-E 3.0 x8 (in x16) Full-height slot
|
| |
| Internal HDDs |
- 2x 3.5" internal SATA3/2 HDD bays w/ RAID (2.5" optional)
|
| |
| DVD-ROM |
- Slim DVD-ROM Drive (optional)
|
| |
| Fans |
|
| |
| 350W AC power supply w/ PFC |
AC Voltage |
- 100-240 V, 50-60 Hz, 4.2-1.8 Amp
|
+5V |
|
+5V standby |
|
+12V |
|
+3.3V |
|
Certification |
Gold Certified [ Test Report ]
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- DMI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
Software |
- IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
| RoHS
|
- RoHS2 (2011/65/EU) Compliant
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|