 | |
 | | SuperWorkstation |
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3, E5-1600
v4†/
v3 family
or Intel® Core™ i7 series
(up to 160W TDP **)
- Single Socket R3 (LGA 2011)
|
| Core / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support |
| |
|
| Memory Capacity |
- 8x 288-pin DDR4 DIMM slots
- Up to 1TB ECC 3DS LRDIMM
- Up to 512GB ECC LRDIMM
- Up to 256GB ECC RDIMM
- Up to 128GB DDR4 ECC/non-ECC UDIMM (available with Core i7 only)
|
| Memory Type |
-
2400†/
2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs
|
| DIMM Sizes |
- 3DS LRDIMM: 128GB
- LRDIMM: 64GB, 32GB
- RDIMM: 32GB, 16GB, 8GB, 4GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps) via C612 controller
- RAID 0, 1, 5, 10 support
|
| Network Controllers |
- Intel® i210-AT Dual Port Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- RealTek ALC1150 High Definition Audio
|
| |
|
| SATA |
- 10x SATA3 (6Gbps) ports via PCH
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
|
| USB |
- 8x USB 3.0 ports (2 front + 6 rear)
|
| Audio |
|
| Keyboard/Mouse |
- 1x PS/2 Keyboard/Mouse port
|
| Serial Port / Header |
|
| TPM |
|
| |
|
| PCI-Express |
- 4x PCI-E 3.0 x16 slots (runs at 16/16/NA/8 or 16/8/8/8)
- 2x PCI-E 2.0 x1 (in x4) slots
PCI-E slot #1 supports (x4) and slot #4 (x16) is disabled when an Intel Core i7-5820K is installed
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.7.1
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
| |
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Weight |
- Gross Weight: 35.5 lbs (16.1kg)
- Net Weight: 29.5 lbs (13.4 kg)
|
| Available Colors |
|
| | |
| | Buttons |
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LED
- System Information LED
|
| Ports |
- 2x front USB 3.0 Ports
- 2x front HD/AC97 Audio Ports
|
| | |
| | Internal |
- 4x 3.5" fixed drive bays
- Enterprise SATA HDD only recommended
|
| Peripheral |
- 2x 5.25" peripheral drive bays
- 1x card reader module
|
| | |
| | Fans |
- 1x 12cm front cooling fan
|
| | |
| | 900W AC multi output power supply |
| AC Voltage |
- 100-240 V, 50-60 Hz, 10-6 Amp
|
| +5V Standby |
|
| +12V1 |
|
| +12V2 |
|
| +12V3 |
|
| +12V4 |
|
| +5V |
|
| +3.3V |
|
| -12V |
|
| Certification |
 Gold Level
|
| Note: |
• Max. continuous combined load on +3.3V and +5V output shall not exceed 155W.
• Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W.
|
| |
|
| Voltage |
- +12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT
|
| FAN |
- Total of 5 fan headers supporting up to 5 fans
- 5 fan headers with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
