Question
I am using an X10DRW-I motherboard with RSC-R1UW-2E16 riser card. I am using a dual port Intel 10G card. When I go into the Bios to select the 10G ports on the card for PXE boot I am unable to see the boot priorities under the BBS network . How do I resolve this issue?
Print
Answer
Please download the Intel bootutil: https://downloadcenter.intel.com/download/19186


Then enable PXE using these commands:
BootUtil –FLASHENABLE -NIC=1 (enables the bios which is disabled completely from the factory)
BootUtil -BOOTENABLE=PXE -NIC=3 (turns on the bios for PXE; can be done without reboot despite utility saying –flashenable requires reboot)
Reboot to the Intel NIC BIOS (Cnt-S on POST) or enable PXE boot directly from the driver utilities.
Was this FAQ helpful?
Enter Comments Below:
Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to .
Enter your email address below if you'd like technical support staff to reply:
Please type the Captcha (no space)
7 C H R
FAQ ID:
21380
Related Category / Keyword:
Feature:
PXE (Preboot eXecution Environment)
Date Posted:
08/21/15
Code:
Find more questions
Still Need Support?
Having trouble finding what you're searching for? Contact our support team for further assistance.

Certain products may not be available in your region